Audited Supplier
XB-OTS-P
Installation,Operation and Maintenance Videos and
14 Months
1000mm
<900kg
Vibration Testing Machine
<1000KN
0.5
Electronic Load
Dynamic Load
Digital
Computer Control
500-1000Kg
AC220V
40kg
17
0~5
Vertical or Leve
CE ISO
OTS
Standard Strong Wood Case
700*560*680 mm
Guangdong, China (Mainland)
9031809090
Product Description
high frequency vibration test machine
Through the vibration controller of the signal source output to the power amplifier, amplified by the signal and then input to the vibration table body, generating excitation source, simulate the actual situation of the specimen to the vertical vibration test; through the acceleration sensor signal acquisition and input to Vibration control device, the output signal and feedback signal stacking calculation, to achieve the excitation source and the target spectrum of high degree of coincidence. The system is given by the signal target spectrum, to complete the vibration test of the specimen, the test specimen vibration durability, integrity and so on.
Test content
1, random vibration test
Random vibration test according to the actual environmental requirements are the following types: broadband random vibration test, narrowband random vibration test, broadband random plus one or several sinusoidal signals, broadband random plus one or several narrowband random. The first two are randomized trials, the latter two are mixed type can also be classified into randomized trials. Stochastic control uses the transfer function equalization method to continuously output Gaussian random signals, and quickly performs real-time accurate closed-loop control. The built-in adaptive control algorithm can react quickly to the nonlinearity of the system. The random control also provides kurtosis control functions specifically designed for reliability enhancement tests. The working principle of the electric shaking table is based on the amperometric law of the current-carrying conductor acting in the magnetic field by the electromagnetic force.
2, sinusoidal vibration test
Sine vibration test control parameters are mainly two, namely the frequency and amplitude. According to the frequency change and invariant divided into fixed frequency and sweep two. Fixed frequency test is mainly used for:
A) Resonance frequency processing: the vibration frequency of the product found in the frequency of the apparent resonance frequency, the provisions of the vibration parameters of the vibration amplitude to assess the product resistance to resonance vibration.
B) Resistance to constant frequency processing: In the known product using the ambient conditions of vibration frequency, can be used to determine the frequency of vibration test, the purpose is to assess the product at a given risk frequency to withstand vibration.
Sweep test is mainly used for:
A) product vibration frequency response (ie, the initial resonance check): to determine the stability of the resonance point and work to find the product resonance frequency, to do vibration-resistant treatment.
B) Anti-sweep processing: When the product in the frequency range of the use of non-resonant point, or there are several significant resonance point, must be anti-sweep processing, sweeping processing in the low frequency band positioning shift amplitude, high frequency band Using the logarithmic continuous scan of the amplitude of the constant acceleration, the crossover frequency is generally 55-72Hz, and the sweep rate is usually carried out by one octave per minute.
C) Final Resonance Check: Check the same method with product vibration frequency response to check whether the resonance point of the product has been changed after the vibration treatment to determine the reliability of the product after the vibration treatment.
Specification :
Set way: Chinese and English menu, computer operation, the use of specialized monitoring and control software,test of the whole process of handling and output.
Display functions: dynamic display test curves, multi-Dan, on the number of data.
Curve recorder features:real-time record of the test data,test data automatically,the test results can be stored, printed
Packing & Shipping
1.Strong standard wood case, inner plastic films wrapped for Vibration Testing Machine
2. Usually we delivery the equipment by air,by sea or by express. it depends on customer
Company Advantage
Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
Ø ISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDECustomer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
FAQ
Please tell me the test product,
Leave your email and informations,
Then Click the below "send"
I will give you the best service and surprise,try it?
Suki
Through the vibration controller of the signal source output to the power amplifier, amplified by the signal and then input to the vibration table body, generating excitation source, simulate the actual situation of the specimen to the vertical vibration test; through the acceleration sensor signal acquisition and input to Vibration control device, the output signal and feedback signal stacking calculation, to achieve the excitation source and the target spectrum of high degree of coincidence. The system is given by the signal target spectrum, to complete the vibration test of the specimen, the test specimen vibration durability, integrity and so on.
Test content
1, random vibration test
Random vibration test according to the actual environmental requirements are the following types: broadband random vibration test, narrowband random vibration test, broadband random plus one or several sinusoidal signals, broadband random plus one or several narrowband random. The first two are randomized trials, the latter two are mixed type can also be classified into randomized trials. Stochastic control uses the transfer function equalization method to continuously output Gaussian random signals, and quickly performs real-time accurate closed-loop control. The built-in adaptive control algorithm can react quickly to the nonlinearity of the system. The random control also provides kurtosis control functions specifically designed for reliability enhancement tests. The working principle of the electric shaking table is based on the amperometric law of the current-carrying conductor acting in the magnetic field by the electromagnetic force.
2, sinusoidal vibration test
Sine vibration test control parameters are mainly two, namely the frequency and amplitude. According to the frequency change and invariant divided into fixed frequency and sweep two. Fixed frequency test is mainly used for:
A) Resonance frequency processing: the vibration frequency of the product found in the frequency of the apparent resonance frequency, the provisions of the vibration parameters of the vibration amplitude to assess the product resistance to resonance vibration.
B) Resistance to constant frequency processing: In the known product using the ambient conditions of vibration frequency, can be used to determine the frequency of vibration test, the purpose is to assess the product at a given risk frequency to withstand vibration.
Sweep test is mainly used for:
A) product vibration frequency response (ie, the initial resonance check): to determine the stability of the resonance point and work to find the product resonance frequency, to do vibration-resistant treatment.
B) Anti-sweep processing: When the product in the frequency range of the use of non-resonant point, or there are several significant resonance point, must be anti-sweep processing, sweeping processing in the low frequency band positioning shift amplitude, high frequency band Using the logarithmic continuous scan of the amplitude of the constant acceleration, the crossover frequency is generally 55-72Hz, and the sweep rate is usually carried out by one octave per minute.
C) Final Resonance Check: Check the same method with product vibration frequency response to check whether the resonance point of the product has been changed after the vibration treatment to determine the reliability of the product after the vibration treatment.
Specification :
| Vibration table (air cooling type ) | ||
| Sine thrust | 600kgf no load | |
| random force | 600kgf no load | |
| Impact thrust | 1200kgf no load | |
| Frequency Range | 2~3000Hz no load | |
| Continued displacement | 51mm P-P no load | |
| The impact of displacement | 51mm P-P no load | |
| Maximum speed | 2m/s | |
| Maximum acceleration | 981m/s2 no load | |
| Moving coil diameter | Φ200mm | |
| Allow eccentric moment | >190N.m | |
| Load connection point | 6 piont | |
| Equivalent mass of moving parts | 6kg | |
| Countertops screw size (standard) | M8 | |
| Screw layout table (diameter, circumference) | 8 on Φ100mm,8 on Φ,200mm. | |
| Axial isolation frequency | <3Hz | |
| Maximum load | Max 300Kg | |
| Magnetic flux leakage | <1mT | |
| Dimensions (without packaging)(L×W×H) | 890*750*850mm | |
| Vibration table Weight | 950kg | |
| compressed air | 0.6Mpa | |
| Power | 3phase 380V 50Hz, 28 KVA | |
| PA Amplifier | ||
| Amplifier output | 8kVA | |
| SNR | ≥65dB | |
| Noise | ≤70dB | |
| Servo protection system | Temperature, wind pressure, over-displacement, over-voltage, over-current, input under-voltage, external fault, control power, logic fault, input mismatch, etc. | |
| Rated output voltage | 120Vrms | |
| maximum output current(Arms) | 70Arms | |
| Amplifier efficiency | >95% | |
| frequency response(5Hz~2000Hz) | ±1.5dB | |
| harmonic distortion(5Hz~2000Hz) | ≤0.8% | |
| Dimensions (without packaging)(L×W×H) | 880*590*1270mm | |
| Amplifier Weight | 350 kg | |
| Cooling fan (containing the sound box) | ||
| Power | 4kW | |
| Airflow | 0.3m3/s | |
| Duct diameter | 120mm | |
| Pressure | 0.048kgf/cm2 | |
| Dimensions (without packaging)(L×W×H) | 950×1100×2150 mm | |
| Vibration table Weight | 230 kg | |
| Vertical extension table | ||
| Table size | 600*600 mm | |
| Equivalent mass | 40kg | |
| Upper frequency | Sine 1000 Hz; random: 2000Hz | |
| Countertop Materials | magnesium alloy / aluminium alloy | |
| horizontal extension table | ||
| Table size | 600*600 mm | |
| Equivalent mass | 40kg (not including connecting head) | |
| Upper frequency | Sine 1000 Hz; random: 2000Hz | |
| Countertop Materials | Aluminium/magnesium alloy | |
| Vibration controller | ||
| Enter the number of channels | 2 voltage channels, 2 charge channels | |
| Resolution | 24-bit digital-to-analog converter (DAC / ADC) | |
| Anti - aliasing filter | Analog anti-aliasing filter plus digital filter, stopband attenuation greater than 160dB / Oct | |
| Coupling method | AC differential, AC single-ended, DC differential, DC single-ended, IEPE, TEDS (optional), charge | |
| Enter the range | ± 10 VPEAK | |
| controlling software | Sine control, random control, typical impact control, resonant search and presence The accessories include USB cable, installation CD, password file, etc. | |
| Acceleration sensor | ||
| Host hardware | Sensitivity 20pC / g, frequency response 1-10kHz, mileage 500g, weight 10g, side of the outlet; configuration 6 meters long dedicated low noise cable; | |
Set way: Chinese and English menu, computer operation, the use of specialized monitoring and control software,test of the whole process of handling and output.
Display functions: dynamic display test curves, multi-Dan, on the number of data.
Curve recorder features:real-time record of the test data,test data automatically,the test results can be stored, printed
Packing & Shipping
1.Strong standard wood case, inner plastic films wrapped for Vibration Testing Machine
2. Usually we delivery the equipment by air,by sea or by express. it depends on customer
Company Advantage
Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
Ø ISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDECustomer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
FAQ
| 1. How to choose the most suitable fitness equipment steel tensile testing machine? |
| Our professional team will give you the best suggestion as long as you tell us what kind of test you need to do and the required specification. |
| 2. What's the delivery term? |
| At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making special arrangement for you. |
| 3. Do you accept customization service? |
| Yes, of course, we can not only offer standard machines, but also customized machines according to your request. Don't hesitate to tell us your requirement, we will try our best to meet your needs. |
| 4. Can we visit your factory before order? |
| Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to arrange hotel and pick up you from airport. |
| 5. Do you have customers of our country before? |
| Now our testing machines have been sold to more than 26 countries, like USA, Canada, Russia,UK, Italy, Germany, European Union, India, Pakistan, Philippines, Singapore, Thailand and Vietnam, Iran, Brazil...and so on. |
| 6. How about your warranty? |
| Generally, our warranty is one year. Within the warranty period, we can offer technique support and part parts change, necessarily, our engineers may go to your place for better service. |
| 7. How about the packing for machine, is it safely protected during transportation? |
| Our machine is packed by standard export wooden box, it won't be damaged. We've delivered many testing machines abroad by sea or by air without damage. |
| 8. What is the order process? |
| Inquiry - quotation - communication - order confirming - deposit payment - production - testing and debugging - balance payment - packing - delivery - customer receiving - after service. |
| 9. How to install and use the product? |
| The product is shipped with an operating instructions and video of English version. |
Please tell me the test product,
Leave your email and informations,
Then Click the below "send"
I will give you the best service and surprise,try it?
Suki
