Heating Treatment Laboratory Electric Furnace High Temperature 1500 1600 1700 1800 2000 1200 Degree Muffle Furnace

• 1200 degree high temperature 12L mini electric Muffle Furnace
  Max.temperature	1200°C/40560ºF
  Working temperature	0-1150ºC/ 0-38870ºF
  Furnace Chamber size(DWH)mm	300*200*200 or as your requirement
  Heat element	SiC Heating Element & Resistance wire
  voltage and frequency	110v 220v 380v 50Hz/60Hz
  Heating rate	0-20C/min
  Temperature accuracy	±1°C
  Thermocouple	K type
  Control Type	Push Button
  Temperature control	Adopt international advanced temperature controller, with 30-50 programmable PID self-tuning, automatic temperature rise, automatic temperature drop, no duty.(can be replaced by touch screen with additional order)
  Appearance design	The electric furnace adopts humanized design, beautiful and easy to operate, and the outer layer of paint is sprayed with high temperature baking technology. High temperature resistance, oxidation resistance, acid and alkali resistance. Color selection is aging resistant tone, will not cause the appearance color fade due to a long time of use.
  Furnace shell structure	Electric furnace shell adopts double layer forced air cooling structure, so that the electric furnace works at the highest temperature and the surface temperature of the shell is below 45ºC,And it is safe .
  Temperature control security	The electric furnace adopts integrated circuit, module control, double circuit protection (partial temperature protection, ultra-high temperature protection, coupling protection, overcurrent protection, overpressure protection and other protection functions) to make the electric furnace work stable and reliable, safe.
  Furnace door style	Front open to aside Power cutting off when furnace door open
  Furnace Chamber material	Three layers of ceramic fiber insulation materials First layer: 1200°C ceramic fiber board, density 550kgs/m3. Thermal conductivity (1200ºC) is only 0.18W/m.k. Second layer: 1200°C ceramic fiber board, density 400kgs/m3. Third layer: 1260°C ceramic fiber board, density 320kgs/m3. The advantage is light weight, high temperature resistance, cold and heat resistance, no crack, no crystallization, no slag, do not worry about pollution of the fired products. The energy saving effect is 60-80% of the old electric furnace.
  Furnace chamber design	Furnace adopts the stepped assembly structure, integrating the mechanical law, effectively ensure the furnace in the heating process of uniform force, ensure that the heat is not easy to disperse, prolong the service life of the furnace.
  Sandard accessories	Crucible tongs 1pc, Thermal gloves 1 pair,User manual 1 pc,other small tools for assembly furnace
  Other temperature options	1000ºC, 1200ºC,1400ºC, 1600ºC,1700ºC,1800ºC
  Furnace chamber standard size	100*100*100mm,200*150*150mm,300*200*200mm,400*300*300mm 500*300*300mm, 600*600*600mm,800*500*500mm,1200*600*600mm or other OEM size
  Waranty	One year
  Furnace Chamber Size and Temperature can customized

The production of the laboratory muffle furnace r introduce
1.Start by the blanking process for the metal part

Normally the house of the  Dental Lab Wax Burnout Furnace Muffle Furnace  was made by the steel or stainless steel of type as 316
The part was beginning as the blanking
1.Laser blanking machine capacity :8000*2000*10mm 
2.We had about 15 pcs of the laser cutting machine in blanking workshop ,name from No1 to No 15,
3.6S fully carry out in our workshop according to the iso13485,
4.All of the raw material can be Traceability

The press brake machine is a powerhouse in the metal fabrication industry, providing an efficient and successful method to bend sheet metal into different forms
To form the metal part into the shape we need ,the first part was by the bending press and the bending die

 

Stainless Steel :Provides great strength and resistance to corrosion, but its greater spring back the ability to revert to its original shape after bending means that it must be handled carefully. 

 

Overhead Laboratory Homogenizers Hot Plate Max 716°F, 100-2000RPM Hot Plate with Overhead Rotor stator Homogenizers , 2000mL Rotor stator Homogenizers
 need the bracket for the motor and metal stamping part for the housing and electric connect part,The progressive die stamping can give out the huge volume and low cost for the LED Digital Hotplate Overhead Rotor stator Homogenizers Hot Plate with Ceramic Coated Lab Hotplate, 280ºC Stir Plate, Overhead Mixer 3,000mL Stirring Capacity, 200-1500rpm, Digital Electric Sintering Tube Furnace spare metal part.

The Heating Digital Electric Sintering Tube Furnace need a lot of welding ,to imporve the capacity and welding quality we introduce the welding robot machine instead of labor human welding
1.QTY of the welding robot :23pcs
2.Capacity of the welding robot :500A
3.Work station:2000*1500mm

Plastic part was one part of the CE Standard Electric Muffle Furnace
We had about 10 sets of the plastic injection work for the CE Standard Electric Muffle Furnace
1.The capacity for plastic injection machine was :1000*850*750mm
2.The max ton for plastic injection machine was 1000T

The 6S was fully carry out in our warehouse with the ERP system 
1.We need to know how many part in our warehouse
2.We need to anticipate the part when to full fill in for all the Laboratory Electric High Temperature Furnace

The rotor was the key part for the Laboratory Electric High Temperature Furnace Equipment ,to make it perfect especial for the high speedHot Plate Rotor stator Homogenizers with Time Setting Speed Adjusting Rotor stator Homogenizers Mixer Machine  Equipment ,we need to control the tolerance of the rotor very tight,that was why we introduce the Laboratory Electric High Temperature Furnace
1.CNC QTY:15PCS
2.Tolerance for CNC machine :0.01mm

All Laboratory Electric High Temperature Furnace need to be test before transfer it to the warehouse.

Customer review our Laboratory Rotor stator Homogenizers  Machine workshop,We were welcome all of our customer to visit our company to review and test the Laboratory Electric High Temperature Furnace for Organisms, Medical, Chemistry,Our business vision was :long term business ,win-win for the future

Warehouse and stroage for the medical Medical Sterilization Machine,the temperature should be control within 18-25° for all equipment and test machine ,all the record can trace within 3 years.
 

The maintain and repair guarantee for the Laboratory Electric High Temperature Furnace workshop was the key to the business ,when a customer bought a machine from us ,the guarantee was the most importance things customer concern.we sent out technical service team to oversea customer site for the maintain and repair for our customer .Our service for the lab equipment was not stop after the Vacuum Steam Machine Machine sold ,it was the start for our company and your company for win win situation .You use Laboratory Electric High Temperature Furnace we take care of the rest.

We take part into the MedtecChina Canton Fair (The China Import and Export Fair) exhibition every year ,hope one day we can meet each on the fair

The supplier and the customer was togeher for the future ,both parties should be in win-win situation ,so we were looking forwarder to hold hand by hand for bright future.

Reduce energy consumption and increase heat-up time with  Benchtop Muffle Furnaces. The furnace is ideal for ashing most types of organic and inorganic samples, heat treating small steel parts, performing ignition tests and conducting gravimetric analysis, as well as for the determination of volatile and suspended solids.

• Available in two capacities
• Digital single setpoint temperature control to 1400°C
• Single display shows actual temperature or setpoint
• Ceramic fiber insulation permits faster heatup, reducing energy consumption
• Embedded heating element on top and both sides improves temperature uniformity
• Drop-down door doubles as a shelf for loading and unloading
• Door safety switch stops power to heating elements when door is opened
• Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition
• 0.95cm (0.38in.) dia. port in chamber rear for monitoring temperatures with independent measuring devices