Audited Supplier
ROS64
Customized
JIS, AISI, API
Jobber-length
Core Drill Bit
Diamond
Wood Drilling, Well Drilling, PCB Drilling, Metal Drilling, Masonry Drilling
DTH Hammer Bits
DTH Hammer Button Bits
DTH Hammer Bits
DTH Hammers & Drilling Bits
Down Hole Hammer Drill
Down The Hole Hammer Bits
Down The Hole Tooling
Down The Hole Bits Supplier
Down The Hole Bits Manufacturer
Down The Hole Bits Supplier in China
ROSCHEN
Wooden Box
50cm
China
84314320
Product Description
DTH drill bit
Now the high pressure DTH drill bit is currently used in the face design. There are four main types: end surface convex surface, end surface planar surface, end surface concave surface and end surface deep concave center type. Carbide more choice of ball teeth, spring teeth or ball teeth and spring teeth shared tooth mode.
Roschen has a comprehensive range of DTH drill bits to match all conceivable applications. Each bit is made from quality alloy steel, and has been precision machined to produce a perfect body, heat treated to the required hardness, given surface compression for fatigue resistance, and fitted with precision buttons manufactured in-house. These are deigned for specific applications for all rock types, hardness's and condition. Bit life and rate of penetration are the most important criteria in selecting the right bit for a particular application.
Bit Face Shape Selection:
Drop Center:
For High penetration rates in soft to medium hard and fissured rock formations. Low to medium air pressure. Maximum hole deviation control.
Concave Face:
The all round application bit face specifically for medium hard and homogenerous rock formations. Good hole deviation control and good flushing capacity.
Convex Face:
For high penetration rates in soft to medium hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control.
Double Gauge Face:
This kind of face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high air pressures and good resistance to steel wash step gauge bit.
Flat Face:
This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash.
Pineapple Face:
The Pineapple Bit can be dressed with ballistic buttons for use in soft to medium hard formations where fractured rock can be expected, or can be supplied with spherical buttons for hard and abrasive formations.
DTH drills are classified into high-pressure down-the-hole drills and low-pressure down-the-hole drills. At present, the polycrystalline diamond downhole drill bit is better, with high strength, high hardness, strong wear resistance, impact resistance and good self-sharpening, and its wear resistance is 5-20 times higher than that of cemented carbide. You can consider ROSCHEN Diamond DTH bit, improve work efficiency, reduce consumption, reduce the time to replace the drill and get lower drilling cost!
Product specifications:
For 6" hammer DTH bits shank | Bit Dia. | No. Air Holes | Gauge Buttons | Front Buttons | Weight (Kg) | Part No. | |
| (mm) | |||||||
| mm | inch | ||||||
| DHD360/COP64 | 152 | 6" | 2 | 8×φ16 | 8×φ16 | 26 | DHD360-152 |
| 165 | 6 1/2" | 2 | 8×φ18 | 8×φ16 | 28 | DHD360-165 | |
| 178 | 7" | 2 | 8×φ18 | 8×φ18 | 30.5 | DHD360-178 | |
| 190 | 7 1/2" | 3 | 9×φ18 | 9×φ16 | 34 | DHD360-190 | |
| 203 | 8" | 3 | 9×φ18 | 9×φ18 | 36 | DHD360-203 | |
| SD6 | 152 | 6" | 2 | 8×φ16 | 8×φ16 | 26 | SD6-152 |
| 165 | 6 1/2" | 2 | 8×φ18 | 8×φ16 | 28 | SD6-165 | |
| 178 | 7" | 2 | 8×φ18 | 8×φ18 | 31 | SD6-178 | |
| 190 | 7 1/2" | 3 | 9×φ18 | 9×φ16 | 34 | SD6-190 | |
| 203 | 8" | 3 | 9×φ18 | 9×φ18 | 36 | SD6-203 | |
| QL60 | 152 | 6" | 2 | 8×φ16 | 8×φ16 | 25 | QL60-152 |
| 165 | 6 1/2" | 2 | 8×φ18 | 8×φ16 | 27 | QL60-165 | |
| 178 | 7" | 2 | 8×φ18 | 8×φ18 | 28.5 | QL60-178 | |
| 190 | 7 1/2" | 3 | 9×φ18 | 9×φ16 | 31 | QL60-190 | |
| 203 | 8" | 3 | 9×φ18 | 9×φ18 | 33 | QL60-203 | |
| Mission60 | 152 | 6" | 2 | 8×φ16 | 8×φ16 | 22 | M60-152 |
| 165 | 6 1/2" | 2 | 8×φ18 | 8×φ16 | 23 | M60-165 | |
| 178 | 7" | 2 | 8×φ18 | 8×φ18 | 24 | M60-178 | |
| 190 | 7 1/2" | 3 | 9×φ18 | 9×φ16 | 25 | M60-190 | |
| 203 | 8" | 3 | 9×φ18 | 9×φ18 | 28 | M60-203 | |
ROSCHEN hammer bit technical data:
| ROSCHEN DTH Bits Specifications | ||||
| Hammer Size | Bits diameter | Shank | ROSCHEN CODE | |
| Metric | Inch | |||
| 1" | 64mm-70mm | 2 1/2"-2 3/4" | BR1 | ROS 11 |
| 2" | 70mm-95mm | 2 3/4"-3 3/4" | MACH20/BR2 | ROS 22 |
| 3" | 90mm-102mm | 3 1/2"-4" | COP32/COP34/MACH303 | ROS 32 |
| M30/DHD3.5/BR3 | ROS 34 | |||
| 4" | 105mm-152mm | 4 1/8"-6" | COP44/DHD340/MACH44 | ROS 42 |
| SD4/M40/QL40 | ROS 44 | |||
| 5" | 133mm-165mm | 5 1/4"-6 1/2" | COP54/DHD350R/MACH50 | ROS 52 |
| SD5/M50/QL50/BR5 | ROS 54 | |||
| 6" | 152mm-254mm | 4 1/8"-10" | COP64/DHD360/SD6 | ROS 62 |
| M60/QL60/Bulroc BR6 | ROS 64 | |||
| 8" | 203mm-330mm | 8"-13" | COP84/DHD380/SD8 | ROS 82 |
| QL80/M80/M85 | ROS 84 | |||
| 10" | 254mm-380mm | 10"-15" | SD10 | ROS 100 |
| NUMA100 | ||||
| 12" | 305mm-508mm | 12"-20" | DHD1120/SD12 | ROS 120 |
| NUMA120/NUMA125 | ||||
| Notes: | ||||
| Metzke, Remet thread is available! | ||||
| Any special size of DTH bits will be available by requests. | ||||
Shank can be available:
1), Dia. 64mm-70mm shank Bulroc BR1
2), Dia. 70mm-95mm shank Halco MACH20, Bulroc BR2
3), Dia. 90mm-102mm shank COP32, COP34, Halco MACH303, M30, DHD3.5, Bulroc BR3
4), Dia. 105mm-152mm shank COP44, DHD340, Halco MACH44, SD4, M40, QL40, Bulroc BR4
5), Dia. 135mm-165mm shank COP54, DHD350R, COP54, Halco MACH50, SD5, M50, QL50, Bulroc BR5
6), Dia. 152mm-254mm shank COP64, DHD360, SD6, M60, QL60, Bulroc BR6
7), Dia. 203mm-330mm shank COP84, DHD380, SD8, QL80
8), Dia. 254mm-380mm shank SD10, Numa100
9), Dia. 305mm-508mm shank DHD1120, SD12, N120, N125
10), Dia. 405mm-864mm shank SD15, SD18
11), VKP80, VKP95, CIR90, CIR100, CIR110, CIR150, CIR200...
We can also provide related products DTH hammers, ODEX system, symmetrix systems, slide block drilling systems, etc and DTH drilling pipes for various thread API REG, API IF, BECO, etc
Product photos
Quality warranty:
Our products are made of high quality steel and all spares parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion.
Package:
Using ply-wooden cases and pallet for package to protect the products and avoid the damagement during transportation. Also we can customize package according to your special requests.
Production time:
Generally need 15-25 days
Transportation:
By air, By Express or By sea according to your requests.
FAQ
Q: Are you a manufacturer or trading company ?
A: We are a specialized manufacturer.
Q: How about the delivery terms ?
1. Payment: T/T, L/C, Western Union, Paypal, 30% deposit in advance and rest before delivery.
2. Min. order quantity: 1 piece.
3. Transportation: By DHL/TNT/Fedex express, air, sea, train.
Q: How about discount ?
A: Price is based on products and order quantity.
Q: Do you accept sample order?
A: Yes sure, please contact us for details.
Q: How about your after-sales service?
A: As a manufacturer, we offer promt technology support for all problems and questions. Besides, we accept goods return or replace for quality problem.
For more information please contact:
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
: +86-137 6419 5009 ; +86-135 8585 5390
Website: http://roschen.en.made-in-china.com
; http://roschen.en.made-in-china.com
http://roschen.en.made-in-china.com
; http://roschen.en.made-in-china.com
