Shanghai Based Excavator Attachment Manufacturer - Favorable Pricing Guaranteed

This is a navigation page of our partial excavator attachments. We present this page to audience who is looking for long-term partner to supply them quality earthmoving attachments with competetitve prices. You are welcome to request offer of other attachments not showed in this page.

Digging Bucket
 

Double radius design to minimize surface friction and maximize cycle time efficiency when loading and unloading the bucket.

Tapered bucket design by narrowing the width of the bucket's heel, material falls out easier because there is less friction during dumping. This also prevents material from packing into the top of the bucket.

Clean-up Bucket
 

A clean-up bucket for an excavator is a specialized type of excavator bucket that is designed for cleaning and moving loose materials like soil, rocks, and debris. These buckets typically have a wider and flatter shape than standard excavator buckets, and they may have perforations or slots in their floor to allow water or other liquids to drain away. Clean-up buckets are often used in construction, mining, and other heavy-duty projects where the removal of loose debris is necessary.

Clean-up Bucket Tilt
 

Tilt clean-up bucket designed specifically to reach those awkward spots with less repositioning of your excavator. RJ tilt clean-up buckets allow for level grading on uneven terrain, provide a smooth tilting action and are designed to fit tightly when curled up. With a 45 degree tilt range on each side, RJ tilt buckets give the right angle every time.
 

Skeleton Bucket
 

RJ skeleton bucket designed to effectively sift out rocks, brush or other large debris while leaving your backfill where it belongs. Reduce your load waste while improving the productivity and performance of your machine. Also known as sieve, sifting, sorting or screening buckets.

Trapezoidal Bucket
 

RJ Trapezoidal buckets are special purpose buckets designed for excavating water channels, pipeline trenching and various open drains in a single pass.

 

Excavator Grabs/Grapples
 

RJ manufactures a complete line of mechanical, hydrauic, log and rake grabs/gapples for all excavator makes and models from 1 - 90 tonne for land clearing, demolition, waste recycling, scrap yards, crush and load garbage, wood waste, construction debris, brush, etc. 

Excavator Ripper
 

We supply tough, hard working rippers for excavators up to 120 tonne and backhoe machines. Our strong and durable designed rippers is for you to break rocks, tarmac, paved areas and any other hard materials.

Compaction Wheel
 

We supply tough, hard-working Compaction Wheels for excavators up to 90 tonne. Ideal for compacting dirt back into trenches and tested with longer product life than other brands.

Excavator Grading Blade
 

Grading Blades are typically used in place of cleanup buckets or tilt buckets when working in stickymaterial. The tilting option greatly increases thegrading or sloping capabilities of the blade.

Single Rake
 

Rakes to clear away surface material and shallow roots, brush and branches while leaving behind the soil.

Hydraulic Thumb Grab Bucket

The excavator thumb grab bucket combines the functions of a thumb grab and a bucket, making it an essential tool for any construction project. It is ideal for handling irregularly shaped objects and can dig and grade with the same precision as a traditional excavator bucket.

RJ Attachments Co., Ltd. is a manufacturer of construction machinery attachments. 
 
Our company's predecessor was established in 1990 and was renamed RJ Attachments Co., Ltd. in 2018. We are located in Qingcun Town, Fengxian District, Shanghai - about 40 minutes driving from Pudong airport.
 
After more than three decades of development, our company has evolved from a small workshop producing wear-resistant plates into a professional attachment manufacturer. Now, it covers an area of over 3,000 square meters and has more than 30 employees. 
 
We possess a complete manufacturing equipment system, including steel plate milling machine, plasma cutting machine, CNC bending machine, CNC shearing machine, plate rolling machines, etc. In the near future, we also plan to introduce advanced manufacturing equipment such as laser cutting machine and welding robots to enhance our market competitiveness. 
 
Our products feature advanced designs and are highly durable. More than 70% of our products are exported to developed countries such as Australia, New Zealand, Japan, and the Netherlands. 
 
In addition, we are a qualified supplier of STEC, a company listed on the A-share market. The large shield machines produced by STEC are widely used in major engineering construction projects at home and abroad.  

(1) Shanghai based manufacturer saves your time and expenses traveling around in China during visit.
(2) More than 20 years experience in OEM order manufacturing for overseas customers.
(3) Favorable pricing in the market

If you have someting in need, no matter you are a importer, wholesaler or even a manufacturer,  just click the upper right corner button and send us all your detailed requirements. Our sales engineer will contact you in a very short time.