Audited Supplier
STUDIO 800
Video Technical Support
Video Technical Support
Metal
Metal-Cutting CNC Machine Tools, Metal-Forming CNC Machine Tools
Linear Control
Open-Loop Control
CNC/MNC
0.01~0.02(mm)
Economical CNC Machine Tools
GS, CE, ISO 9001, SGS
New
5 Axis
1400X800
1000kg
Hardened Steel
Customized
RL
Wooden Case
3410*2900*3300
China
8457101000
Product Description
Products Description:
STUDIO 800
Working center with moving column 5 axis
STUDIO 800 was born from the great experience gained by Fagima in moving column machining centers. It was studied in each detail using the most modern design and calculation systems and it is the result of a mix between best seller machines in the Fagima range, Kreos and Jazz.
It is characterized by the high rigidity of the structure and the absence of any flexion on the Y axis.
Rapids and high accelerations allow reductions of the working cycle times.
Available with strokes X = 900 mm, Y = 835 mm and Z = 700, it is characterized by a made in Italy tilting rotary table with 800 mm diameter plateau, and driven by 2 torque motors.
The monolithic base grants high loading capacity without the needs of very complex foundations.
On the monolithic base slides the column-holder carriage, through roller guideways (all X,Y and Z axis have such kind of guideways).
The column has been studied to grant the highest rigidity of the spindle-holder head.
An elegantly styled fairing with 1 front sliding door gives a marked personality to this new Fagima machine, enriched by the logo and the usual operation signal lighted by led stripes.
The standard configuration is susceptible to large expansion and provides most suitable customization of the machine in consideration to the particular needs of each Customer.
TECHNICAL FEATURES
MONOLITIC STRUCTURE
| STROKES and FEED Mobile upright structure with the possibility of working both in "pendular" mode and over the full X-axis. | ||
| X axis stroke | mm | 900 |
| Y axis stroke | mm | 835 |
| Z axis stroke | mm | 700 |
| Distance Nose-spindle/table surface | mm | 159 |
| X/Y/Z axes fast feed speed | m/min | 40/40/40 |
| X/Y/Z axes working feed speed, in linear interpolation (max.) | m/min | 20 |
| TILTING ROTARY TABLE moved by 2 torque motors |
C axis - Rotation
| Max load on the table | Kg | 850 |
| Table dimension | mm | diam 800 |
| C axis - rotation range | 0-360° | |
| Max rotation speed | rpm | 100 |
| Hydraulic clamping torque | Nm | 2500 |
| Positoning accuracy | ±5" | |
| Repeatebility accuracy | ±2" |
B axis - Tilting
| B axis - tilting range | +-110° | |
| Max tilting rotation | rpm | 50 |
| Hydraulic clamping torque | Nm | 5000 |
| Positoning accuracy | ±5" | |
| Repeatebility accuracy | ±2" |
| TOTAL WEIGHT OF MACHINE | ||
| STUDIO 800 | Kg | 14.000 |
ELECTROSPINDLE - ISO40
| Taper dimension | ISO | 40 |
| Speed rotation | min-1 | 60-12000 |
| Integrated spindle motor (electrospindle) | STD | |
| Motor power S6 | kW | 31 |
| Motor torque S6 | Nm | 149 |
RANDOM TOOL CHANGE 60 POSITION IS040
| Capacity, positions | nr | 60 |
| Max tool diameter (with adjacent empty pockets) | mm | 72 (120) |
| Max tool lenght | mm | 300 |
| Max tool weight | Kg | 7 |
| Tool change time (tool-tool) | sec | 1,5 |
| Magazine speed | sec | 0,5 |
STANDARD EQUIPMENT
| Full enclosure equipped with sliding doors with large transparent windows |
| Automatic high-pressure cooling system through the spindle line with 20 bar pump |
| Operator console mounted on a new articulated arm, sliding on top of machine |
| Optical scales on linear axis |
| Direct encoder on rotative axis |
| Automatic cooling system outside the tool |
| Internal and external spindle air for dry operations |
| Scraping chip conveyor |
| Automatic lubrication system |
| Cooling system for electrospindle |
| On-board electric cabinet with conditioner |
| Lights in working area |
| Manual of instructions |
| CE declaration |
TOTAL PRICE IN STANDARD CONFIGURATION 5 AXIS ISO 40
STUDIO 800 5AX (3+2) - ISO-40 / HEIDENHAIN TNC 640 - strokes X/Y/Z: mm 900/835/700 tool magazine 60 positions - axis "C" rotary range 360° - axis "B" tilting range -110° +110° - electrospindle ISO-40 12000 rpm |
ADDITIONAL OPTIONS - Installable at factory only, during manufacturing
- ADDITIONAL EQUIPMENT AND UPGRADE OF STANDARD EQUIPMENT
| Belt chip evacuator (instead of scraping chip conveyor) | ||
| Washing system | ||
| META paperbelt filter system with tank with approx. 500 liter with pump of 40 bar | ||
| META paperbelt filter system with tank with approx. 500 liter with pump of 60 bar | ||
| Electrospindle 16.000 rpm - ISO40 26kw (S1 100%) 124 Nm (S1 100%) with conditioner | ||
| Electrospindle 20.000 rpm - HSK63 Kessler with conditioner | ||
| Tool magazine 60 pos. with HSK63 taper (additional price on optional 60 pos. ISO40) | ||
| Tool magazine 120 pos. with ISO40 taper (additional price on optional 60 pos. ISO40) | ||
| Tool magazine 120 pos. with HSK63 taper (additional price on optional 60 pos. ISO40) | ||
| Additional pushbutton panel for rotation of tool magazine, loading and unloading of tools | ||
| Tracking system for workpiece dimension and alignment control by means of Heidenhain TS460 radio wave sensor fitted on a tool cone; including measuring cycles for zero point determination, position determination, workpiece centring, etc.; additional customized tracking cycles on demand (available with CNC Heidenhain only) | ||
| Tracking system for workpiece dimension and alignment control by means of Renishaw RMP-60 radio wave sensor fitted on a tool cone; including measuring cycles for zero point determination, position determination, workpiece centring, etc.; additional customized tracking cycles on demand | ||
| Tracking system for workpiece dimension and alignment control by means of Blum TC60 radio wave sensor fitted on a tool cone; including measuring cycles for zero point determination, position determination, workpiece centring, etc.; additional customized tracking cycles on demand | ||
| System for measuring the tool length/radius and tool integrity function by means of a mechanical sensor fitted on the table | ||
| System for measuring the tool length/radius and tool integrity function by means of a laser sensor RENISHAW | ||
| Air gun | ||
| Coolant gun | ||
Additional options on HEIDENHAIN numerical control mod. TNC-640 HSCI
| Software option 2 5-axis simultaneous machining | |
| Kinematics software option For easy calibration of rotary axes | |
| DCM - Dynamic collision monitoring Opt 40 for cyclically monitoring the working space of the machine for possible collisions with machine components. |
| Delivery terms | EXW (ex works) FAGIMA / Barberino Tavarnelle (Florence) Prices are for unpacked goods and without transport insurance |
| Delivery time | To be defined before delivery the customer undertakes to comply with the "Installation and maintenance rules and the foundation plan", which will timely be communicated |
| Payment terms | To be agreed |
| Any packaging | At cost To be quoted after order confirmation |
| Machine installation: | Not included To be quoted on Customer demand |
| Training course on machine use: | Not included To be quoted on Customer demand |
| Safety: | The machine is CE-marked according to EU Directives in force |
| Mechanical, electrical and electronic warranty: | 12 months from the date of installation if the machine is used in daily shifts of 8 hours. In case of utilization superior to 8 hours per day, the period of warranty will be proportionally reduced. Warranty does not cover malfunctions due to negligence, incorrect use of the machine, bad maintenance or accidental collisions. |
| Offer validity | 30 days from the date of issue |
| Prices: | All prices are quoted excluding VAT |
| Prices of options: | These are valid only if options are ordered along with the machine. If separately ordered, they will be treated as spare parts and price would be higher. |
| Foundation | Not included; at customer charge. In order to grant the best performance and precision of the machine, the execution of the proper foundation is strictly necessary. Upon receipt of confirmed P/O, Fagima will supply the lay-out of the machine and the position in the workshop. After customer's approval Fagima will provide the foundation drawings. |
| EXCLUSIONS Following material and activities are explicitly excluded from quotation | Lubricating fluids Crane and operator at customer's workshop Foundation cost, cement for grouting Plates, cover and grids connected to foundation Tooling and fixtures Main power line and switch gear Any other material or activities, if not explicitly included in the offer. |
Please tell me your specifications (or send your workpiece drawing to us) ,we can choose the best model for you , or you can choose the exact model . You can also send us the products drawing ,we will choose the most suitable machines for you .
2: What's your main products of your company?
We specialized in CNC Lathe Machine ,CNC Milling Machine ,Vertical Machining Center ,Lathe Machines ,Drilling Machine ,Radial Drilling Machine ,Band Saw Machine ,Sharper machine and so on .
3: How long is the delivery time?
For standard machines,it would be around 30 days;For non-standard machines and customized machine according to client's specifications requirements,it would be a little longer.
4.Where is our factory located? How can I visit there?
Our factory is located in Weifang City, Shandong Province, 261071 China. You are warmly welcomed to visit us.
5. What is your trade terms?
FOB, CFR and CIF all acceptable.
6: What's the Payment Terms?
T/T ,30% initial payment when order ,70% balance payment before shipment ; Irrevocable LC at sight .
7: What's the MOQ?
1 set .(Only some low cost machines will be more than 1 set ).
5. What is your trade terms?
FOB, CFR and CIF all acceptable.
6: What's the Payment Terms?
T/T ,30% initial payment when order ,70% balance payment before shipment ; Irrevocable LC at sight .
7: What's the MOQ?
1 set .(Only some low cost machines will be more than 1 set ).
