Audited Supplier
RTE V29 is a 4D high-precision traffic sensing device that uses pulse compression radar modulation technology. It can detect no less than 8 lanes in both directions, and the maximum longitudinal detection length can reach 300 meters. Based on its rich 4D high-resolution point cloud information, it can accurately measure the distance, speed, angle and height of the target, providing more accurate and continuous trajectory tracking and classification of large, medium and small vehicles and pedestrians. It can better adapt to the construction of dual-intelligent cities and vehicle-road collaborative application scenarios, support autonomous driving beyond-visual-range perception, and provide multi-dimensional data such as real-time high-precision vehicle location information.
Table 1: Radar parameters
| No | Specifications | Parameters |
| 1 | Frequency band | 80GHz |
| 2 | Coverage | 8 lanes, 300m in longitudinal direction |
| 3 | Point cloud data | ≥20000 points/sec |
| 4 | Detection cycle | ≥50ms |
| 5 | Position accuracy | ±0.3m |
| 6 | Range resolution | ±0.3m/s |
| 8 | Velocity resolution | 0.35km/h |
| 9 | Range of speed coverage | -200km/h~+200 km/h |
| 10 | Angle accuracy | 1.2°(horizontal angle), 2.3°(pitch angle) |
| 11 | Horizontal FOV | 120° |
| 12 | Vertical FOV | 28°(near beam /8°(far beam) |
| 13 | Max number of detected targets | 256 |
| 14 | Working temperature | -40ºC~70ºC |
| 15 | Working voltage | DC 24V (wide voltage range 16 ~ 36V) |
| 16 | Working humidity | 0~95% |
| 17 | Working power consumption | ≤30 W |
| 18 | Installation height | 6~8 meters |
Table 2: Function list
| No | Specifications | Parameters |
| 1 | Targets categories | Large vehicles, small vehicles, pedestrians, non-motor vehicles |
| 2 | Traffic data | Pulse data: presence state |
| 3 | Real-time data: target ID, speed, location, size | |
| 4 | Passing data: passing speed, passing time, occupancy time | |
| 5 | Statistical data: traffic flow, average speed, time occupancy, headway, inter-vehicle time, 85% speed | |
| 6 | Queue data: queue length, number of vehicles in the queue, first/last vehicle position in the queue | |
| 7 | Area data: number of vehicles in the interval, space occupancy, average speed in the interval, distribution coefficient | |
| 8 | Incident data | Queue overflow |
The types of intersections in the city include: crossroads, T-intersections, and multi-fork intersections. Intersection radars are installed on signal light poles to observe the oncoming lanes.
- Supports 4D high-resolution imaging-level point cloud output to achieve more accurate classification of large vehicles, medium vehicles, small vehicles, non-motor vehicles, and pedestrians.
- Supports 12 transmission channels, 16 receiving channels, and up to 192 virtual channels.
- Pulse compression radar modulation technology, higher signal-to-noise ratio to achieve more accurate and continuous trajectory tracking.
- Laterally covers up to 8 lanes and vertically covers 300 meters to achieve high- accuracy detection in large areas.
- Supports decimeter-level high-accuracy range detection.
- Supports high- accuracy speed detection.
- Supports millisecond-level delay output, and the maximum data refresh frequency supports 20Hz.
- Supports NTP time synchronization, PTP time synchronization, GNSS time synchronization, and manual time synchronization to achieve high-precision time synchronization.
- In typical urban scenarios, the effective target detection rate reaches more than 98%, and the effective tracking rate reaches more than 95%.
- It has all-weather working ability and is not affected by light and weather such as rain, snow, and fog.
As a typical representative of the new generation of 4D imaging perception radar detection equipment, RTE V29 embodies the company's core technologies such as multi-target trajectory tracking, multi-mode behavior recognition, and multi-dimensional data processing. It has functions such as target classification, stable tracking of group vehicle trajectories, traffic flow information collection and statistics, and traffic event detection and recognition. It is widely used in road scenarios such as urban intelligent signal control, urban digital smart transportation, and vehicle-road collaboration. It provides scientific, advanced, and comprehensive intelligent traffic perception solutions for urban signal control, urban road network construction, traffic digital twins, and vehicle-road collaboration.
Digital intersection application solution:
Vehicle-road collaborative system solution:
1 Q:Do you have any discount?
A:Yes, if you buy large QTY, please send us a email, we will give you a big discount.
2 Q:What's the delivery time?
A:According to the specification and quantity of your order, generally 10-15 days for normal
standard products within 500pcs.
3 Q:Do you have overseas distributor?
A:Yes,we have distributors in United States, Canada, Russia, Belarus, Brazil, South Korea and so on.
4 Q:Can we use our logo on the products?
A:Yes.We can provide ODM/OEM and sign a licensing agreement.
5 Q:Are you manufacturer or trading company?
A:We are manufacturer with more than 13 years of experience. Our factory headquarters is in Nanjing, China. Welcome to visit our company.
6 Q:Do you have any certification?
A:Yes,according to the different products,overpass CE, FCC, RoHS, ISO, etc,we can offer certificates.
7 Q:What's the means of transport?
A:Express such as Fedex, DHL,UPS, or logistics by indicator.
