Audited Supplier
SPG800K-30
Melting
ISO
Vertical Type
Shuangping
shuangping
Carton
100--400KG
China
8514400090
Product Description
Main specifications of SPG800K-30 high frequency induction heating machine
(1) paper cutter blade quenching
(2) shear blade quenching
(3) Annealing of wire less than 1mm
(4) saw tip quenching, etc.
all models and specifications of SPG800K series
Main applications and characteristics:
These series are suitable for many applications, for example, (1)Heat treatment of gear and shaft(2)metal wire and foil heating (3)tiny or powder material melting
Due to the adopting of our third generation inverting control technology, These series machines are characterized not only with high power and high frequency up to 500KHZ output, but also with high reliability .
Working theory and structure:
In These series machines, series oscillating circuit is applied, through high frequency transformer, low voltage and high current power is output to go through the induction coil. The main oscillating structure is as follows:
- Model: SPG800K-30
- Maximum input power: 30KW
- Output frequency: 500-800KHZ
- Heating Current: 7~70A
- Input: 380V three phases 50 or 60HZ
- Duty cycle: 100%
- Timing function of A type machine: Heating, retaining and cooling time: 0.1-99.9 sec.
- Cooling water desire: ≥0.2MPa ≥6L/min
- Weight of Generator: 70KG
- Size of Generator(CM): 65L×40W×75H
- Size of Transformer(CM): 45L×30W×40H
- Used for Blade quenching, etc.
(1) paper cutter blade quenching
(2) shear blade quenching
(3) Annealing of wire less than 1mm
(4) saw tip quenching, etc.
all models and specifications of SPG800K series
| model | Max. input power | Output frequency | input | Auxiliary function |
| SPG800K-10 | 10 | 500-800KHZ | 3×380V 50 or 60HZ standard | |
| SPG800K-15 | 15 | |||
| SPG800K-20 | 20KW | |||
| SPG800K-30 | 30KW |
Main applications and characteristics:
These series are suitable for many applications, for example, (1)Heat treatment of gear and shaft(2)metal wire and foil heating (3)tiny or powder material melting
Due to the adopting of our third generation inverting control technology, These series machines are characterized not only with high power and high frequency up to 500KHZ output, but also with high reliability .
Working theory and structure:
In These series machines, series oscillating circuit is applied, through high frequency transformer, low voltage and high current power is output to go through the induction coil. The main oscillating structure is as follows:
Inside These series machines, MOSFET and our third generation inverting control technology has been used, that is the soft and dual control and inverting technology. In this technology, output power and frequency can be controlled and adjusted separately, IGBT and soft switching control technology are used in the high frequency switching circuit to control the output power. In the inverting circuit, the MOSFET and frequency tracing circuit is applied to achieve high speed and accurate soft switching control. The adoption of new technologies not only improves the quality and reliability of the machine,but also solve the technology problem on large power induction heating machine and makes it possible to work 100% duty cycle.
Inside the These series machines, oscillating cap is connected to the secondary coil of the transformer, so the voltage on the primary coil of the transformer is low and problems caused by high voltage such as sparks and insulations are solved thoroughly to increase the reliability and quality of the machine. At the same time, the transformer is light and small sized with low energy consuming.
Advantages and applications of models with Timer function:
Inside the These series machines, oscillating cap is connected to the secondary coil of the transformer, so the voltage on the primary coil of the transformer is low and problems caused by high voltage such as sparks and insulations are solved thoroughly to increase the reliability and quality of the machine. At the same time, the transformer is light and small sized with low energy consuming.
Advantages and applications of models with Timer function:
- Heating power, retaining power, heating time, retaining time can be preset and adjusted, this makes it possible to control the heating curve and heating time.
- It is suitable to use in the repeated heating or high speed heating of small parts;
- When using in brazing, with proper timing parameters, rapid heating and retaining can be achieved to keep the temperature while the brazing material is melted and then to let the brazing material spread smoothly to form good joint.
- Due to the high frequency output, one body machine is recommended to achieve high frequency and low energy loss.
- In these three series machines, the high frequency transformer is separated from the generator, with 2 meters connecting cable at least.
- It is suitable to use in the dirty or corrosive surroundings, the generator can be put in a clean space to increase the reliability.
- With the small size and light weight of the separated transformer, it is convenient to use in the production line and easily assembled inside the machinery or moved mechanism.
