Audited Supplier
| 500LPH Water Purifier | |
| Dimensions | 45*55*140cm |
| Weight | 85kg |
| Frame Material | 304 stainless steel 38*38*1.2 |
| Desalination rate | 99.2% |
| Reverse Osmosis Membrane Element Specifications | 4040 |
| Reverse osmosis pressure vessel material | Stainless steel |
| Operating Pressure | 0.6~1.0Mpa |
| Raw water quality | <1000ppm |
| Pre-treatment | 20 inch*2 pp*1 cto*1 |
| Maximum Operating Pressure | 1.5Mpa |
| Water yield | 500L/hr 25ºC |
| Inlet water temperature | 5~45ºC |
| PH value of influent water | 3~10 |
| Warranty time | 1 year, excluding consumables |
| Functional description | Full-automatic operation, low-pressure protection, high-pressure protection, water production tds display, high-pressure pump start-stop protector |
| Voltage/Power | 220v / 1.6kw |
| Inlet size | 6 points |
What is RO Water Treatment System?
A reverse osmosis (RO) system is a type of water treatment system that uses a semi-permeable membrane to remove dissolved solids, impurities, and contaminants from water. The process of reverse osmosis involves applying pressure to a solution that is more concentrated than the raw water source, forcing the purified water through the membrane and leaving behind impurities.
| Capacity | Productivity | Power | Recovery |
| 500L | 0.5T/H | 0.75KW | 55-75% |
| 1000L | 1.0T/H | 2.2KW | 55-75% |
| 2000L | 2.0T/H | 4.0KW | 55-75% |
| 3000L | 3.0T/H | 5.5KW | 55-75% |
| 5000L | 5.0T/H | 7.5KW | 55-75% |
| 10000L | 10.0T/H | 11KW | 55-75% |
| 20000L | 20.0T/H | 15KW | 55-75% |
| One Stage Purified Water Conductivity | Two Stage Purified Water Conductivity | EDI System Purified Water Conductivity | Raw Water Conductivity |
| ≤10μ s/cm | 2-3μ s/cm | ≤0.5μ s/cm | ≤300μ s/cm |
Please provide the following details to obtain accurate solution recommendation and quotation:1. Required water production
2. Raw water source
3. Water quality requirements
4. The material of the pretreatment filter tank and pipeline
5. Water storage facility for the incoming water
6. Use site power
Q:What is your OEM & ODM process ?
A:1.Customer request
2.Factory propose solutions
3.Customer confirms solutions
4.Factory offers quotation
5.Customer confirms quotation
6.Sample for testing
7.Sample quality approved
8.Customer places bulk order
9.Bulk order production and shipment
10.Repeat orders
Q:What is your production lead time?
A::Usually about 15-18 days, but we might finish the production earlier if there are not too many orders.
Q:How much discount can l get?
A:Larger quantity,more discount.But when bulk order,we can return the sample product cost to you for free.
Q:Can I have my logo on the product?
A:Customer's logo can be embossed on our case.But you need to send us the logo in Al or CDR or PSD format. We will ask our designer to make a drawing for you to have a check how it looks on our case.
Q:How long can l get the sample?
A:For samples, it usually takes 2-3 days.
Q:What is your MoQ?
A:MOQ is 1x20GP container, please contact us to ask if your order quantity is less than our MOQ.
Q:What is your best price?
A:Our products have a quite wide price range for different types. Thus please contact us online, we will glad to give you quotation upon receipt of your detailed requirements.
