Audited Supplier
100/120mm Heat Insulation Durable Polystyrene Concrete Sandwich Panel For Steel Structure
EPS cement sandwich panel, made from surface panel calcium silicate board, core material with cement, eps, sand, fly ash.
After complicated chemical reaction under high temperature, high pressure and steam curing. Has the characteristic of lightweight, excellent fire insulation, water proof, sound proof performance.
Since eps cement sandwich panel is a highly thermally insulating cement-based material, it can be used for both internal and external construction. Besides, eps cement sandwich panel have good insulation capability.
One of its advantage in construction is its quick and easy installation. Because the material can be routed, sanded, or cut to size on site using standard carbon steel power tools.
| Material | 5mm fireproof calcium silicate board+ Flameresistant EPS+Cement+Sand+Fly ash |
| Size | Length: 2270/2440mm |
| Width: 610mm | |
| Thickness: 60/75/90/100/120/150mm | |
| Character | Fireproof, heat insulation, saving time and space, easy install, lightweight, waterproof |
| Accessories | Cement mortar, Anti-crack tape, Steel bar, Cutting machine (we could offer if needed) |
| Connection way | Tongue&Groove |
| MOQ | One container |
| Production lead time | 7-20days after receive deposit |
| Payment terms |
|
Installation Steps
1.Setting the line and carrying the board into position
Eject double lines of board thickness up and down the axes of installed wall board, and easily carry to the side of wall according to the specification needed.
2.Sawing board
Using hand-hold electric saw freely according to the specification of wall, which can reduce the loss rate.
3.Sizing
Sizing the bump slots and then spread the baseline and the bump slots with the special adhesives.
4. Installation
Carrying the board prepared to be installed to the installation place, correcting the wall board by Special tools, and making it close tightly, and let the polymer mortar squeeze out into full and then fixing it with a wedge temporarily.
5. Correcting, fixing
Using a guiding rule of two meters to check the verticality and leveling correction. Then using 6mm or 8mm reinforcing steel bar and ribs adding with construction sealant to fix.
6. Grouting and filing starch
Using the special adhesives to fill the gaps between boards one day after correcting wall. Then putting the chock out and letting the corrected wall smoothly with polymer mortar.
7. Grooving and piping, Sticking anti-cracking tape
Cutting a groove by a hand-hold electric saw for burying the concealed wire and switch box. Then filling with polymer mortar after installation.
After finished grouting 3 or 5 days, then sticking anti-crack tape or attaching fiber mesh cloth if need second decoration.
8. Door and window,
Preparing a door and window hole on the installed wall, anchor ring it with splint or lines.
9. Facing ceramic tile, decorative sheet, coating and wall paper.
Sticking ceramic tiles, or wood facing panels and coating directly on the installed wall without plastering.
show you the wide usages of our eps cement sandwich panels.
* Lightweight and economy
* Heat preservation
* Economical, environment-friendly, Energy-saving
* Sound insulation: 38~55dB
* Fireproof: ≥4 hours under the high temperature of 1000 degrees.
* Waterproof and wet proof: can be used for toilet, bathroom and kitchen partition wall
* Anti-pressure, anti-quake and anti-impact
* Spiking and stickability: hanging force for single point is more than 45kg
* Fast installation and saving labor cost: 3 workers can finish 120m2/day
* Increase usable area and reusable
* Long lifespan: the prefab house made by ZJT wall panels can last more than 50 years, it is the best substitute for conventional concrete wall materials.
Freda Lin
Xiamen ZhongJingTai Building Materials Co,. Ltd
Facebook: Freda Lin
