Audited Supplier
calcium carbonate plant compounding with PP PE and some other additives.The machine with High-torque twin-screw extruding screw unit, this is a new-generation high-speed, high-torque and high-power twin screw extruder realizing technological promotion based on the existing product by drawing experience from the advanced manufacturing technology in China. Screw elements install like building blocks, piece by piece. Differ design can be for different material.
The advantages of this machine
1. Highly efficent: the machine is automatic and with less power consumption.
2. Special screw design: We will design the screw up to customer different material and the material of screw and barrel can be 38CrMoAL or bimetallic.
3. This machine can carry out ideal viscosity of PET without complicated precystallization dryer system. Only a bit IV will be reduced. It can improve IV in the condition of adding some suitable additive.
5. The machine wih long life.
other type of these kinds of machine
Model | TSSK20 | TSSK30 | TSSK35 | TSSK50 | TSSK65 | TSSK72 | TSSK92 |
Screw diameter(mm) | 21.7 | 30 | 35.6 | 50.5 | 62.4 | 71.2 | 91 |
Rotary speed(rpm) | 600 | 400 | 400/600 | 500/600 | 400/500 | 400/500 | 400/500 |
Main motor power(kw) | 4 | 11 | 11/15 | 37/45 | 55/75 | 90/110 | 220/250 |
L/D | 32-40 | 28-48 | 32-48 | 32-48 | 32-48 | 32-48 | 32-40 |
Capacity(kg/h) | 2-10 | 5-30 | 10-80 | 20-150 | 100-300 | 300-600 | 600-1000 |
Machine line 
Big bag station/The ton bag unloading staion: when the raw material is packed in big ton bags, then our this machine can unpack it and send the material into the extrusion machine
Rotary charger send the material into the main feeder and the side feeder, the feeder will send the Raw material into the extruder equally and smoothly. Main feeder feed the main material such as PE (LLDPE, LDPE, HDPE), PP, TPE and side feeder feed the additives such as SBS Color batches Filler and additives ( UV protection Materials, Modified, EVA, black carbon granule, flame-retardant granule….)
If there is some material need to be weighted, the we can use a weightlessness feeder to weight it, so that the material can be feeded into the extruder exactly.
Screw elements, barral and the core of the machine
Vacuum degassing to discharger the water in the material, so that the final products can be much better to use
There are sereval pelletizing way for cutter the material, like vertical water-ring pelletizing way, horizontal pelletizing way, under-water pelletizing way, pull strap pelletizing way.(Pull trap like noodles pelletizing way, PET must use this pelletizing way. PC, KPE ABS are also need pull strap pelletizing way. )
Water tank can cool the material and the gale dryer will blow the water on the surface of the mateiral, then the pelletizer will cut the material into granules.Speed of pelletizer can be controlled, so that the size of granules can be tested by the speed of the pelletizer. Then you can use a dryer mixer to dry the material again. The dryer mixer will dry the material with hot wind.Finally the material can be send into the silo or send to big bags to be packed.Vibration can seperator good pellets from bad pellets.
We can use electricl cabinet button to operate the total line, also we can use a PLC screen touch to operate the total line, the PLC screen touch can be moved, so that you can operate each equipment beside it and look at the equipment.
all line, the PLC screen touch can be moved, so that you can operate each equipment beside it and look at the equipmen Some more similarly machine
Machine under producting
Two side feeder to feed glass or other additives into the extruder.
Machine line
Final pellets by water-ring cutter
If you need more details of this kind of machine kindly contact me, I can send you more detail photoes and vedios.
1. We supply below necessary documents with the machine:
- Machine layout
- Electricity diagram
- Machine certificate
- General manual book/maintenance book
2. We provides one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you with DHL courier or other way within 7 workdays after receiving the complainant. And send the technicians to the buyer's factory for maintaining. All charges are in our account.
3. After one year guarantee, If you need we can provides payable spare parts and technician's VISITING maintenance, and any broken spares we can send you soon as possible.
4. We trust that our quotation meets with your requirements and we will gladly furnish you with further information.
