Audited Supplier
LW1000~LW6000
DC to AC
Single Phase
Low Frequency
SVC, DBW, JIW, Solar Inverter System
Low Frequency
Medium
Copper Transformer
DC to AC Charger Inverter
Industrial and Mining Enterprises
Zlpower
120VAC, 220VAC, 230VAC, 240VAC
50Hz/60Hz
Pure Sine Wave
Show Voltage, Battery, Load
DC/AC Priority
3 Times of Rating Power
Bypass, DC Auto Start Optional
Free Maintenance Sealed Lead Acid Batter
140-280V or 165-265V
20AMP, 35AMP, 50AMP, 70AMP
ZLPOWER
by Wooden Boxes,by Package
CE, IEC
China
8504403090
Product Description
Power Star 1000W-6000W Pure Sine Wave Solar Power Charger InverterNEW FEATURES:
1. LCD Digital Display Panel, can show voltage, battery and load details and adjust voltage or frequency.
2. Add inside MPPT solar charger controller 12v/24v 40A. (Optional)
3. Add remote control LCD panel with 5meters length cable. (Optional)
Advantages:
l. Pure sine wave combined inverter charge
l. 4 step progressive charging 7 battery type selector
l. Easy to install & easy to use
l. Highpower,Multistage Battery charger
l. Automatically and swiftly line to battery switchover
l. High efficiency using lineinteractive circuit topology
l. Microprocessor control guarantees high reliability
l. Bypass without battery connected
When the POWER STAR LW is in the inverter mode, the ' through the box' earth line is automatically
disconnected from the input earth and joined to the output neutral, complying with the natural earth
inverter requirements if you what to maintain a trough earth simply connect the input earth to the
output earth.
| Model No. | LW1000 | LW2000 | LW3000 | LW4000 | LW5000 | LW6000 |
| Nominal Power | 1000W | 2000W | 3000W | 4000W | 5000W | 6000W |
| AC Input | ||||||
| Phase & waveform | Single phase & Pure Sine Wave | |||||
| Voltage | 120VAC/230VAC | |||||
| Acceptable Voltage | 194-243VAC\164-243VAC(wide mode ) | |||||
| Line Low Transfer | 85V±4%/184(154 wide mode±4%) | |||||
| Line Low Return | 95V±4%/194(164 wide mode±4%) | |||||
| Line high Transfer | 135V±4%/253±4% | |||||
| Line high Return | 127V±4%/243±4% | |||||
| Frequency | 50Hz or 60Hz (auto sensing) | |||||
| Line Low Transfer | 47Hz for 50Hz,57Hz for 60Hz | |||||
| Line high Transfer | 55Hz for 50Hz,65Hz for 60Hz | |||||
| Output | ||||||
| Phase & waveform | Single phase & Pure Sine Wave ( bypass mode sync to input ) | |||||
| Voltage | 120/220/230/240VAC ( bypass mode sync to input ) | |||||
| Voltage Regulation | ±10%rms ( bypass mode sync to input ) | |||||
| Frequency | 50Hz±0.3Hz ( bypass mode sync to input ) | |||||
| Peak Power | 3 times of rating power | |||||
| Short Circuit Protection | Yes,shutdown after 10ms | |||||
| Power Factor | 0.9-1.0 | |||||
| DC Input | ||||||
| Battery Voltage | 12V/24V | 12V/24V/48V | 24V/48V | |||
| Minimum Start Voltage | 10V for 12V,20V for 24V,40V for 48V | |||||
| Low Battery Alarm | 10.5V for 12V,21V for 24V,42V for 48V | |||||
| Low Battery Transfer | 10V for 12V,20V for 24V,40V for 48V | |||||
| High Voltage Alarm | 16V for 12V,32V for 24V,64V for 48V | |||||
| Max Charging Current | 35A/70A | |||||
| Over Charge Voltage | 15.7V for 12V,31.4V for 24V,62.8V for 48V | |||||
| Transfer Efficiency | ||||||
| Line Mode | > 95% | |||||
| Battery Mode | > 88% | |||||
| power saver | Available when the load is less than 25 Watts | |||||
| Indicators | ||||||
| 7-LED Display | From the right to the left,LED1 line mode (green lighting) , LED2 inverter mode | |||||
| (green lighting) , LED3 charging mode ( yellow lighting ), LED4 Fully charged | ||||||
| (green lighting) , LED5 over heat shutdown(red lighting ), LED6 Overloaded | ||||||
| shutdown ( red lighting ), LED7 Saving Mode ( green lighting ) | ||||||
| 3-LED Display | Charging Mode(green lighting) , inverter mode(green lighting) , Alarm ( red lighting ) | |||||
| Switch selector | Saving Mode is on/off when push the switch forwards/backwards, keeping it horisontal is | |||||
| turning the inverter off. | ||||||
| Audible Alarm | Sounding when the heatsink's tem is over 105 °C and shutdown after 30 seconds. | |||||
| Protections | low battery , over charging , over temp , over load | |||||
| Communications | RS-232/USB(custom-made ) | |||||
| Enviromental | ||||||
| Operating Environment | 0-40 °C ,0-90%RH(non-condensing) | |||||
| Audible Noise | < 60dB | |||||
https://zlpower.en.made-in-china.com/contact-info.html
Shenzhen ZLPOWER Electronics Co., Ltd. (ZLPOWER for short) founded in 2007. Our company is a leading manufacturer for inverter and ups of ISO9001 approved, which is a key hi-tech enterprise in state "Torch Plan," integrating science, industry, trade, and investment into a whole. ZLPOWER factory registered capital of RMB 50million, covering three floor area of 10000sq.m, and owning assets of RMB 300 million. And our products had passed Thayer certification, CE certification, UL certification, ETL certification, CCC certification. OEM and ODM are acceptable.
One-stop service the price, quality, service, and after-sales service are all things you need are provide. We are factory direct sales, wholesale and retail are acceptable, good quality and the price is favorable to help your business.
