Audited Supplier
86STH/86BYG250/34HS150
Can Be Customized
Variable Speed
Two-Phase
HB-Hybrid
Control
8
Magnetic-Electric
ISO9001
Thank
Stepper Motor Driver
CF20522m ,CF20611m, CF2068m
Servo Control System
220VAC, 110VAC, 48VDC,36VDC,24VDC
THANK
Carton or Wooden Box with Foam Inside
86mm*86mm*L65-165mm
China
8501310000
Product Description
HYBRID STEPPING MOTOR 86STH150+Brake
General Specifications:
Step Angle ----------------------------------------------------------------------------------------------------------------1.8° (full step)
Step Angle Accuracy --------------------------------------------------------------------------------------±5%(full step, no load)
Resistance Accuracy --------------------------------------------------------------------------------------------------------------±10%
Inductance Accuracy --------------------------------------------------------------------------------------------------------------±20%
Temperature Rise ----------------------------------------------------------------------80ºC Max(rated current, 2 phases on)
Ambient Temperature Range ---------------------------------------------------------------------------------------- -20ºC∽+50ºC
Insulation Resistance --------------------------------------------------------------------------------------- 100MΩ Min. 500VDC
Dielectric Strength --------------------------------------------------------------------------------- 500VAC 50Hz 1mA 1 Minute
Insulation Class ------------------------------------------------------------------------------------------------------------------ B class
Electrical Specifications:
| Model | L Motor Length (mm) | Holding Torque (N.cm) Min. | Rated Current (A) | Phase Resistance (Ω) | Phase Inductance (mH) | Rotor Inertia (g.cm²) | Lead Wire | Detent Torque (N.cm) Max. | Motor Weight (g) |
| 86STH6540 | 65 | 240 | 4 | 0.65 | 3.3 | 0.8 | 4 | 10 | 1.9 |
| 86STH7060 | 70 | 340 | 6 | 0.4 | 1.7 | 1.0 | 4 | 12 | 2.1 |
| 86STH8060 | 80 | 450 | 6 | 0.45 | 3.0 | 1.23 | 4 | 15 | 2.3 |
| 86STH10060 | 100 | 728 | 6 | 0.50 | 4.8 | 2.7 | 4 | 20 | 3.3 |
| 86STH11860 | 118 | 870 | 6 | 0.57 | 5.5 | 3.3 | 4 | 30 | 3.7 |
| 86STH13060 | 130 | 1000 | 6 | 0.6 | 5.8 | 4.0 | 4 | 35 | 4.0 |
| 86STH15060 | 150 | 1200 | 6 | 0.7 | 6.8 | 5.0 | 4 | 45 | 5.5 |
*Shown in the table is the representative product. It can be customized according to the requirements of users.
Features: 1) Excellent torque frequency characteristics, low noise, low fever, big brake torque, fast response
Shaft:
End:
2-Phase Digital Stepping Motor Driver
CF2068M
OverviewCF2068M
CF2068M is a 2-phase hybrid stepping motor driver based on DSP control. It is a new
generation of digital stepping motor drive which combines advanced DSP control chip and 2-phase
inverter drive module. The drive's voltage is between AC20-80V, adapter current is below 6.0A and
86-110MM diameter of all kinds of 2-phase hybrid stepping motors. It uses a similar servo control
circuit, which can make the motor running smoothly, almost no vibration and noise. When the motor
is at high speed, its torque is much higher than other hybrid stepping motors. Positioning accuracy is
up to 51200 steps / turn. The product is widely used in engraving machine, medium-sized CNC
machine tools, computer embroidery machine, packaging machinery and other high resolution, large
and medium-sized CNC equipment.
Key Features:
- High performance and low price
- Equipped with 16 scales constant torque moment subdivision, the maximum resolution is 40,000 steps / turn
- The maximum response frequency is up to 200KPPS
- When a stepping pulse stops more than 1.5S, the coil current will be automatically reduced to half of the set current
- Optical isolation signal input / output
- Drive current 2.0A / phase to 6.0A / phase 8 scales adjustable
- Single power input, voltage range: AC20~80V orDC24V~110V
- The phase memory function (Note: When the drive stops for more than 3 seconds, it will automatically memorize the motor phase then re-energizes. When the WF signal goes from low to high, the drive will automatically recover the motor phase.)
The operating current of the drive is set by the SW1-SW3 terminals, which switch for normal working output current (See the table below).
| Operating current Ir(A) | 2.0 | 2.57 | 3.14 | 3.71 | 4.28 | 4.86 | 5.43 | 6.0 |
| SW1 | ON | OFF | ON | OFF | ON | OFF | ON | OFF |
| SW2 | ON | ON | OFF | OFF | ON | ON | OFF | OFF |
| SW3 | ON | ON | ON | ON | OFF | OFF | OFF | OFF |
Subdivision Settings:
The drive's subdivision is set by SW5-SW8 terminals. It has 16 scales. SW4 is function set. Subdivision reference table(pulse / revolution)
The drive's subdivision is set by SW5-SW8 terminals. It has 16 scales. SW4 is function set. Subdivision reference table(pulse / revolution)
| Subdivision | 400 | 800 | 1600 | 3200 | 6400 | 12800 | 25600 | 51200 | |
| SW5 | ON | OFF | ON | OFF | ON | OFF | ON | OFF | |
| SW6 | ON | ON | OFF | OFF | ON | ON | OFF | OFF | |
| SW7 | ON | ON | ON | ON | OFF | OFF | OFF | OFF | |
| SW8 | ON | ON | ON | ON | ON | ON | ON | ON | |
| Subdivision | 1000 | 2000 | 4000 | 5000 | 8000 | 10000 | 20000 | 40000 | |
| SW5 | ON | OFF | ON | OFF | ON | OFF | ON | OFF | |
| SW6 | ON | ON | OFF | OFF | ON | ON | OFF | OFF | |
| SW7 | ON | ON | ON | ON | OFF | OFF | OFF | OFF | |
| SW8 | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF | |
| SW4 | ON | Full Current | |||||||
| OFF | Half Current | ||||||||
|
Field
Packing:
Hard cardboard or wooden box with foam inside.
Shipping:
Normally the delivery time is within 10 days according to customer's choice or ship by the best express company to the destination.
Delivery:
1.with over 17 years of manufacturing experience, any type of customizing is available.
2.with perfect service system, we can provide you with first class pre and after sale service.
3.we have enough storage of each type of products, with first class packaging and shipping, make sure accurate delivery.
4.professional sales consultants give you all answers about our proucts.
Certificate:
FAQ:
Question1: What is your service time:
Answer: 24 hours online service. Email will be replied within 12 hours.
Question2: What about your products' warranty?
Answer: 1 year. For sea orders, the warranty is 15 months.
Question3: Do you have any certificate?
Answer: Yes we have. Our factory passed ISO9001 and SGS verified. All motors have been approved by CE.
Question4: Do you offer ODM and OEM Service?
Answer: Yes. ODM products according to customized design and specification as well as OEM products.
Question5: What is the delivery time?
Answer: For samples, 10-30 days according to the differnet produced difficulty. For bulk, normally 20-30 days. For customized order, the delivery can be negotiated.
