Audited Supplier
STICKFLAT is a kind of flexible, cold application, reinforced with polyester mesh or non-reinforced polymermodified bituminous waterproof membrane based on premium guality SBS bituminous adhesive compoundtop side surfaced with a strong AL film, plastic film, fabric or mineral slates etc., and bottom side protectedwith removable release film, cold application method should be approved.
STICKFLAT AL: membrane surfaced with aluminum foil, commonly used for exposed flat roof project.
STICKFLAT HP: membrane surfaced with tough HDPE film, commonly used for unexposed roof, foundation and bridge deck project.
STICKFLAT HM: membrane surfaced with cross-laminated HDPE film, commonly used for unexposedroof, foundation and bridge deck project.
STICKFLAT LM: membrane reinforced with cross-laminated HDPE film, commonly used for unexposedroof, foundation and bridge deck project.
STICKFLAT GF: membrane surfaced with woven or non-woven fabric, commonly used for unexposedroof, foundation and bridge deck project.
| Type | Thickness | Width | Length |
| STICKFLAT AL/HM/LM/HP/GF 1200 | 1.2 mm | 1 m | 20 m |
| STICKFLAT AL/HM/LM/HP/GF 1500 | 1.5 mm | 1 m | 20 m |
| STICKFLAT AL/HM/LM/HP/GF 2000 | 2.0 mm | 1 m | 20 m |
1. Easy to lap and seal: the material itself is viscous, self-lap dense and firm;
2. High tensile strength, good physical properties, with higher and stronger water pressure resistance, puncture resistance, fatigue resistance, tear resistance;
3. Safety and environmental protection: there is no need to use solvents and open flames in the construction process, reducing pollution to the environment;
4. Cold construction operation: self-adhesive asphalt membrane can be constructed at room temperature without hot melting, which is very convenient for construction and can effectively shorten the construction period;
1) Industrial and civil building roofing, underground, pool, tunnel, wooden and metal roofing.2) Especially in the chemical factory, garment factory, and granary.
3) Tape can be used for sealing all construction material
4) Waterproof treatment of structural construction joints, overlap sealing of polymer waterproof membrane.
Construction Method:1.Ensure all surface are clean,dry and dust-free. Remove any loose particles and any rust with a wire brush & soft broom.
2.Roll out the membrane.
3.Remove the backing paper and place the adhesive side to the previously prepared surface.
4.To ensure a tight contact-smooth the tape down with a dry cloth, remocing all the air bubbles;
5.Press the tape to the surface firmly once in position.
6.Smooth flat all edages with a wallpaper roller or trowel.
7.After use reseal pack and store upright in cool,dry condition.
PENNINT is a leading and professional manufacturer of high-quality waterproofing products and related accessories. With a strongl commitment to innovation and customer satisfaction, PENNINT has established itself as a trusted name in the industry.
PENNINT commits to be the one stop service platform of waterproofing systems. To achieve such goal, PENNINT produces large range of products and systemsl with latest technologies and standards, those ensure that PENNINT is always able to meet with customers' requirements.
As a tech-service oriented company, PENNINT has fully devoted into waterproofing industry and willing to create more value for the market.
Our waterproof membrane factory is specialized in the production of high quality waterproof materials.
1. We are committed to providing best-in-class waterproofing solutions to meet the stringent waterproof performance requirements of the construction industry.
2. We are always committed to the core features of advanced technology/quality control/environmental philosophy/professional team and global supply.
3. We understand the importance of waterproofing, so we are committed to continuously pursuing excellence and providing our customers with the most reliable waterproofing membrane products.
The National Standardization Laboratory and its professional quality inspection team provide a full range of escort for product quality through strict testing process, in-depth production supervision, continuous skill improvement and continuous technological innovation, to ensure that consumers can use safe, reliable and high-quality products.
1. Q: Are you trading company or manufacturer?
A: We are Manufacturer.
2. Q: How long is your delivery time?
A: Generally it is 10-15 workdays against pre-payment (depends on quantity).
3. Q: Do you provide samples?
A: Yes, for certain quantity, free sample is available.
4. Can You Make Our Design Or Put Our Logo On The Product?
A: Yes,We support OEM&ODM. Both product and packing can be highly customized.
5. Q:How do you ensure the quality?
A: As an ISO listed manufacturer, PENNINT developed strict QC systems:
1. Raw materials quality control systems;
2. Traceable production process;
3. QC test for each batch of products.
