Audited Supplier
Clean room HEPA ceiling Modules filters Unit with fan is type of unit used for filtering laminar air and supplying clean air. FFU can be used stand alone or installed modularly. FFU is the core when making clean room equipment for a given space including clean booth, clean bench and clean room assembly.
Features:
The master switch inner set with insurance and indicator light
The control mode is flexible, can be three or five air velocity speed adjustment
Abnormal indicator light to understand the operation state of the equipment
Options available:
- ULPA filter (99.9995 @0.1μm)
- stainless steel or AL case
- super thin design
- other requirements
FFU2*2 FFU2*4 FFU4*4
Technical Parameters(HEPA FILTER SPERATED TYPE):
Model | AL-FFU-2*2 | AL-FFU-2*4 | AL-FFU-3*4 | AL-FFU-4*4 | ||||
Overall size W * L * H (mm) | 575 * 575 * 300 | 575 * 1175 * 300 | 875 * 1175 * 300 | 1175 * 1175 * 380 | ||||
HEPA filter size W * L * H (mm) | 570 * 570 * 69 | 570 * 1170 * 69 | 870 * 1170 * 69 | 1170 * 1170 * 69 | ||||
Efficiency | HEPA 0.3μm@≥99.99% OR ULPA 0.12@≥99.9995% | |||||||
Prefilter (optional) | Washable non-woven fabric | |||||||
Construction | Electro galvanized metal sheet OR stainless steel or high quality aluminum sheet | |||||||
Air velocity (m/s) | 0.35~0.45 | 0.35~0.45 | 0.35~0.45 | 0.35~0.45 | ||||
Air flow (CMH) | 410~513 | 840~1080 | 1290~1650 | 1720~2160 | ||||
Speed control | 3 modes, 5 modes, or induction control | |||||||
Noise (dB) | 48 ~ 50 | 48 ~ 52 | 50 ~ 56 | 52 ~ 58 | ||||
Consumption | AC | ≤ 98 | ≤ 150 | ≤ 180 | ≤200 | |||
DC | ≤ 65 | ≤ 90 | ≤ 130 | ≤160 | ||||
Power | AC single phase 110/220V OR three phase 220/380V 50/60Hz Or DC 220V | |||||||
Overload protection | Included (terminals or quick coupling are optional) | |||||||
Weight (KG) | 28 | 40 | 47 | 55 | ||||
Group controller FFU:
FFU FOR CLEAN ROOM:
Cleanroom fan filter unit (FFU) uses HEPA filtration to protect products and personnel inside the cleanroom from unwanted particles and germs. The HEPA filter (or ULPA filter) in the FFU is constructed of delicate tightly woven fibers to catch sub-micron particles. In a typical cleanroom, the fan powered hepa filter mounts on top of the ceiling grid and scrubs air clean as the motor pulls air from outside the cleanroom, pushes it through the HEPA filter and into the cleanroom.
The downward top-to-bottom flow of air into the cleanroom provides laminar airflow - a single pass unidirectional flow of air--starting from the ceiling and exiting near the floor--to help flush out other contaminants that may be introduced inside the cleanroom. The clean filtered air being pushed into the cleanroom also creates a positive pressure environment to help keep unwanted contaminants from drifting inside the cleanroom.
Customized FFU into Production:
OEM Production services.
10+ Years Experience R&D team,
one-stop solution for cleanroom projects.
RFQ about anlaitech:
1. Q: Are you manufacturer or trader?Where are your factory located?
A: We are manufacturer with professional designers and engineers. Our factory is located in Guangzhou city.
2. Q: How long is your warranty? Can we extend?
A: 13months after installation and commissioning. Warranty can be extended with extra charge.
3. Q: Do you have professional engineer team fordesign and installation?
A: Yes, we have engineer team for ODM and OEM services
4. Q: What documents will you provide?
A: We will provide DQ, IQ, PQ, OQ, FAT, operation manual, maintenance instruction, layout drawing etc.
