Audited Supplier
CE, ISO
Heater, Cooler, Condenser
Mixing Heat Exchanger
Steel Type
Stainless Steel
Tublar Heat Exchanger
CS,Ss,Copper Tube,Ti,Hastelloy C and Others
CS,Ss,Ti ,Smo254 and Other Materials
Acceptable
JIEMA
Polywood Box or Customized
ISO9001: 2008
Guangzhou, China
8419500090
Product Description
Stainless Steel Tubular Heat Exchanger as Condensor
Product Description
Shell and tube heat exchanger as a traditional heat exchane equipment,it has been applied for ages. It is the most common type of heat exchanger in oil refineries and other large chemical processes,and is suited for higher-pressure applications.
As its name implies,we can also call it as tubular heat exchanger.
Shell and tube heat exchanger Theory:
Two fluids, of different starting temperatures, flow through the heat exchanger. One flows through the tubes (the tube side) and the other flows outside the tubes but inside the shell (the shell side). Heat is transferred from one fluid to the other through the tube walls, either from tube side to shell side or vice versa. The fluids can be either liquids or gases on either the shell or the tube side. In order to transfer heat efficiently, a large heat transfer area should be used, leading to the use of many tubes. In this way, waste heat can be put to use. This is an efficient way to conserve energy.
Shell and tube heat exchanger characteristic:
| Simple structure, easy manufacturing | GB150~2011,GB/T151-2014,Manufacture License of Special Equipment P.R.C |
| Large processing quantity | (1-2,000m3/h) |
| Stable and reliable operating state | Strong adaptability (applicable to almost all industries) |
| Adaptability to high temperature and pressure | (≤800°C; ≤6.0Mpa) |
| Heat tranfer area is fexible | (1m2~500m2) |
| Tube material | CS,SS,Copper Tube,Ti,Hastelloy C and other materials |
| Shell material | CS,SS,Ti ,SMO254 and other materials |
2.Large processing quantity (1-2,000m³/h)
3.Stable and reliable operating state
Strong adaptability (applicable to almost all industries)
4.Adaptability to high temperature and pressure (≤800°C; ≤6.0Mpa)
5,Heat tranfer area is fexible(1m2~500m2)
Shell and tube heat exchanger Applications and uses:
1>.Cooling of hydraulic fluid and oil in engines, transmissions and hydraulic power packs.
2>.Heating other mediums,such as water,beverager,orange juice and other steam.
3>.They are extensively applied in chemical industrial,pertroleum and energy source and etc.
Shell and tube heat exchanger table:
| The Heat Exchanger Tube Specifications Φ20 | |||||||||
| DN | Quantity of tube pass | Quantity of heat exchanger tube | Quantity of center raw tube | tube pass flow area (m²) | Heat exchanger area(m²) | ||||
| Tube length(mm) | |||||||||
| 1500 | 2000 | 3000 | 4500 | 6000 | |||||
| 159 | 1 | 15 | 5 | 0.0030 | 1.4 | 1.9 | 2.8 | ||
| 219 | 1 | 33 | 7 | 0.0066 | 3.1 | 4.1 | 6.2 | ||
| 273 | 1 | 65 | 9 | 0.0131 | 6.1 | 8.2 | 12.3 | 18.4 | 24.5 |
| 2 | 56 | 8 | 0.0056 | 5.3 | 7.0 | 10.6 | 15.8 | 21.1 | |
| 325 | 1 | 99 | 11 | 0.0199 | 9.3 | 12.4 | 18.7 | 28.0 | 37.3 |
| 2 | 88 | 10 | 0.0088 | 8.3 | 11.1 | 16.6 | 24.9 | 33.2 | |
| 4 | 68 | 11 | 0.0034 | 6.4 | 8.5 | 12.8 | 19.2 | 25.6 | |
| 400 | 1 | 174 | 14 | 0.0350 | 16.4 | 21.9 | 32.8 | 49.2 | 65.8 |
| 2 | 164 | 15 | 0.0165 | 15.5 | 20.6 | 30.9 | 46.4 | 61.8 | |
| 4 | 146 | 14 | 0.0073 | 13.8 | 18.3 | 27.5 | 41.3 | 55.0 | |
| 450 | 1 | 237 | 17 | 0.0477 | 22.3 | 29.8 | 44.7 | 67.0 | 89.3 |
| 2 | 220 | 16 | 0.0221 | 20.7 | 27.8 | 41.5 | 62.2 | 82.9 | |
| 4 | 200 | 16 | 0.0101 | 18.8 | 25.1 | 37.7 | 56.5 | 75.4 | |
| 500 | 1 | 275 | 19 | 0.0553 | 34.6 | 51.8 | 77.8 | 103.7 | |
| 2 | 256 | 18 | 0.0257 | 32.2 | 48.3 | 72.4 | 96.5 | ||
| 4 | 222 | 18 | 0.0112 | 27.9 | 41.8 | 62.8 | 83.7 | ||
| The Heat Exchanger Tube Specifications Φ25 | |||||||||
| DN | Quantity of tube pass | Quantity of heat exchanger tube | Quantity of center raw tube | tube pass flow area (m²) | Heat exchanger area(m²) | ||||
| Tube length(mm) | |||||||||
| 1500 | 2000 | 3000 | 4500 | 6000 | |||||
| 159 | 1 | 11 | 3 | 0.0038 | 1.3 | 1.7 | 2.6 | ||
| 219 | 1 | 25 | 5 | 0.0087 | 2.9 | 3.9 | 5.6 | ||
| 273 | 1 | 38 | 6 | 0.0132 | 4.5 | 6.0 | 9.0 | 13.4 | 17.9 |
| 2 | 32 | 7 | 0.0055 | 3.8 | 5.0 | 7.5 | 11.3 | 15.1 | |
| 325 | 1 | 57 | 9 | 0.0197 | 6.7 | 9.0 | 13.4 | 20.1 | 26.9 |
| 2 | 56 | 9 | 0.0097 | 6.6 | 8.8 | 13.2 | 19.8 | 26.4 | |
| 4 | 40 | 9 | 0.0035 | 4.7 | 6.3 | 9.4 | 14.1 | 18.8 | |
| 400 | 1 | 98 | 12 | 0.0339 | 11.5 | 15.4 | 23.1 | 34.6 | 46.2 |
| 2 | 94 | 11 | 0.0163 | 11.1 | 14.8 | 22.1 | 33.2 | 44.3 | |
| 4 | 76 | 11 | 0.0066 | 9.0 | 11.9 | 17.9 | 26.9 | 35.8 | |
| 450 | 1 | 135 | 13 | 0.0468 | 15.9 | 21.2 | 31.8 | 47.7 | 63.6 |
| 2 | 126 | 12 | 0.0218 | 14.8 | 19.8 | 29.7 | 44.5 | 59.4 | |
| 4 | 106 | 13 | 0.0092 | 12.5 | 16.7 | 25.0 | 37.5 | 50.0 | |
| 500 | 1 | 174 | 14 | 0.0603 | 27.3 | 41.0 | 61.5 | 82.0 | |
| 2 | 164 | 15 | 0.0284 | 25.8 | 38.6 | 58.0 | 77.3 | ||
| 4 | 144 | 15 | 0.0125 | 22.6 | 33.9 | 50.9 | 67.9 | ||
10 years experience:heat exchanger and presusre vessel
2 production bases:Guangzhou,Hubei
5 Export market:Aisa,Mideast,Africa,South America,America
Strong technican team: 5 senior engineers who have over 15 years experience in heat
transferring area
FAQ:
1. Q: How long can we deliver goods?A: 15-20days after payment.
2. Q: Where are our main markets?
A: Our main market are North and South America, Southeast Asia, the Middle East, Africa.
3. Q: What payment terms can you accept?
A: We can accept L/C, T/T, etc.
4. Q: Can you accept customized order?
A: Yes, we accept, we have very professional technical group who can design the special products according to your basic parameter/ data sheet/ drawings or sample.
5. Q: Do you have your own factory or just you are a trading company?
A: We are direct manufacturer leader in China, one manufacturing center is located in Guangzhou, Guangdong Province, another is in Huanggang City, Hubei Province
6. Q: Is OEM order acceptable to your company?
A: OEM is Welcome.
