Audited Supplier
PLC computer CNC coil winding machine Servo Motors Fully Automatic Hook Coil Winding Machine for two or three phases chokes Toroidal Common Inductor
GWA-70HMT Full Automatic Hook Winding and Taping Machine
| No. | Item category | Value |
| 1 | Equipment model: | GWA-70HMT |
| 2 | Adapt to the magnetic ring (outer diameter): | 14mm-45mm |
| 3 | Adapt to wire diameter: | 0.5mm-2.0mm |
| 4 | Length of unilateral line: | 1200mm |
| 5 | Winding speed: | Depends on wire diameter and number of coils |
| 6 | application winding method: | conventional winding method / forward winding |
| 7 | Power supply: | 220V/50Hz single-phase alternating current |
| 8 | Air source: | 0.55Mpa-0.60Mpa |
| 9 | Noise: | 60 decibels |
| 10 | Equipment power: | 3KW |
| 11 | Equipment power: | 0.55°/hour |
| 12 | Operating ambient temperature: | -5°C~40°C |
| 13 | Relative humidity: | (40~90)%RH |
| 14 | Comprehensive pass rate: | 99.5% |
| 15 | Dimensions: | length 1750mm (including belt line) * width |
| 16 | Machine weight: | 500KG |
Features:
1.Two winding machine head:One head for one side winding,the other for another winding
2.The machine is fully automatic operation, automatic loading and unloading,
alarm for lack of material
3.one person can monitor multiple machines, work 24 hours,
and the production efficiency can reach more than 3 times that of manual winding.
4.It only takes 25 seconds for a total of 30 turns on both sides to produce a finished product
GW-7004 New design servo motor Intelligent fully automatic toroidal coil winding machine
| 1 | Model | GW-7004 |
| 2 | power supply | 220V/110V 50/60HZ |
| 3 | Air pressure | 0.6Kpa-0.8Kpa |
| 4 | Maximum wire diameter | 0.2mm |
| 5 | Minimum wire diameter | 0.05mm |
| 6 | Maximum finished outer diameter | 40mm |
| 7 | Minimum finished inner diameter | 6mm |
| 8 | Maximum finished product height | 20mm |
| 9 | Line spacing control | Programming control |
| 10 | Sectional winding control | Programming control |
| 11 | Cumulative winding control | Programming control |
| 12 | Cable motor | Hybrid stepping motor |
| 13 | Main motor | servo motor |
| 14 | Winding speed | Adjustable,the fastest equipment is1400rpm |
| 15 | physical dimension | 900mm*900mm*1500mm |
| 16 | Weight | 75KG |
Features:
1.winding speed:7004:1300rpm 7005:1200rpm
2.Output:About 20PCS/hour if the winding turn is 3000 turns.
3.Main motor: servo motor make the wiring more precise
4.PLC controller
5.This machine is very easy to operate,one worker can watch over 30-50 machines at same time in china.
6.Three winding mode:Clockwise mode CMC mode Back and forth mode.
GWV-12A Servo motor PLC contorller Toroidal Transformer Winding machine
| Wire size | 0.15-2.36mm |
| Minimum finish inner diameter | 25mm |
| Maximum completion height | 100mm |
| Maximum finish outer diameter | 25-300mm |
| Max speed | 150rpm |
| Tape Magazine diameter | 220mm |
1.The servo motor + paired with proximity switch counting ensures hundreds of percent accurate turns, and the maximum idle speed of the machine head can reach 150rpm
2.The stepper motor ensures exquisite wiring
3.Brand new PLC+touch screen control system, German manufacturing technology
GW-29T PLC contorller Toroidal Transformer coil Winding machine with Servo motor
| Wire size | 0.2-1.6mm |
| Minimum finish inner diameter | 17mm |
| Maximum completion height | 70mm |
| Maximum finish outer diameter | 50-150mm |
| Max speed | 240rpm |
| Tape Magazine diameter | 210mm |
This model is a professional machine for winding toroidal transformers, toroidal
potentiometers, and toroidal current transformers with exquisite wiring and powerful
power to adapt to various wire diameters.
GWV10-PLC Automatic Micro core Servo motorToroidal Coil Winding Machine
| Wire size | 0.05-0.32mm |
| Minimum finish inner diameter | 1.8mm |
| Maximum completion height | 10mm |
| Maximum finish outer diameter | 5-14mm |
| Max speed | 1500rpm |
| Magazine inner diameter | 60mm |
Features:
1.Actual input of the inner and outer diameter, wire diameter and wire spacing values of the magnetic ring without repeated debugging is required.
2. Can be completed automatically: dense winding, sparse winding, multi-layer winding, forward and reverse winding, segmented winding, multi-thread parallel winding, etc.winding method.
3.The main motor is a 400-watt servo, with constant torque and precise rotation, and the magnetic core clamp is driven by a stepper motor neat and beautiful wiring.
GWL-0119 Toroid Transformer copper wire coil Winding Machine
| Equipment model | GWL-0119 |
| Winding mode | Gear type |
| Finally complete the outside diameter | 80-200 |
| Minimum finished inside diameter | 40 |
| Maximum finished height | 80 |
| Wire diameter | 0.7-2.5 |
| Perimeter of magazine | 300 |
| Width of magazine | 8-25 |
| Maximum speed | 230 RPM |
| Operating voltage | 220V/50HZ |
| Overall dimension | 500x600x750 |
| Weight | 120KG |
Features:
1.Toroid coreTransformer Winding Machine are advanced,strongly built workhorses capable of winding light as well as heavy wirewithout insulation damage.
2.One set standard automatic toroid coil winding include one PCS winding shuttle only,other sizes winding shuttles are optional.
3.The open gap gear rack and hinged gap magazine of auto Toroid Transformer Winding Machine facilitate core change ,maximizing output.
GWL-6200 Slider type toroidal transformer coil winding machine
| Equipment model | GWL-6200 |
| Winding mode | Gear type |
| Finally complete the outside diameter | 60-120 |
| Minimum finished inside diameter | 35 |
| Maximum completion height | 80 |
| Suitable winding diameter range | 0.2-0.7 |
| Diameter of wire storage ring | 195 |
| Width of storage ring | 9-12 |
| Maximum speed | 800 RPM |
| Operating voltage | 220V/50HZ |
| Overall dimension | 500x600x700 |
| Weight | 90KG |
Features:
1.Toroid Coil Winder Machine feature high quality,easy to operate.
2.Automatic transformer winding machineLock gap shuttles,with polished sliders,gentle on wire insulation.
3.Coil transformer winding machine is ability to control winding speed.
GWLA-0319 Gear type middle speed copper wire toroidal coil winder
| Equipment model | GWLA-0319 |
| Winding mode | Gear type |
| Finally complete the outside diameter | 60-200 |
| Minimum finished inside diameter | 25 |
| Maximum completion height | 80 |
Wire size | 0.5-1.6 |
| Diameter of magazine | 250 |
| Width of magazine | 3-8 |
| Depth of storage ring | 10/12/16 |
| Maximum speed | 230 RPM |
| Operating voltage | 220V/50HZ |
| Overall dimension | 500x600x750 |
Features:
1.Brake tension adjustable, Good settlement for large outer diameter, small inner diameter,transformer coil winder heavy wire coils.
2.Current transfromer coil winding machine with high production efficiency, increase winding efficiency by adjustment of suitable brake tension
3.It adopts the latest microcomputer full Chinese liquid crystal display controller, which has practical functions
GWL-0519 Gear type Current Transformer Winding Machine
| Wire diameter | 0.7-2.0mm | Max.winding speed | 200rpm |
| Max.final coil.O.D | φ60-250mm | Magazine width | 4-18mm (optional) standard 8mm |
| Min.final coil.I.D | Φ40 | Supply voltage | AC 220V(50Hz) |
| Max.finalcoil height | 90 | Mechanical dimensions | 650*500*700mm |
| Controller storage capacity Programs | 50*20 set | Wight | 120kg |
Features:
1.High quality auto transformer coil winder guarantee no wire damage.
2.Parts highly optimized and universal for general use, Easy maintenance
3.Enquiries can be quoted one day service
GWL-815 Gear type high quality coil winding machine for toroidal transformer
| Wire diameter | 0.3-1.6mm | Max.winding speed | 300rpm |
| Max.final coil.O.D | Φ50-200mm | Magazine width | 3-10mm (optional) |
| Min.final coil.I.D | Φ20mm | Supply voltage | AC 220V(50Hz) |
| Max.final coil height | 60mm | Mechanical dimensions | 650*500*700mm |
| Controller storage capacity Programs | 50*20 set | Wight | 100kg |
Features:
1.Accurately wire and tape spacing by adjustable.
2.Toroid Digital Transformer Winding Machine can easily exchangeable magazines secure maximum flexbility.
3.Extremely powerful,maintenance free AC motors for main drive and core rotation.
GWL-0619 Big gear high stability floor type winding machine for inductor
| Equipment model | GWL-0619 |
| Winding mode | Gear type |
| Max.Final outer diameter | 130-450 |
| Mini final inside diameter | 70 |
| Max Final height | 220 |
| Wire diameter | 1.0-4.0 |
| Perimeter of magazine | 1200 |
| Width of magazine | 10-30(Optional) |
| Max winding speed | 120 rpm/min |
Features:
1.Floor type winding machine Complete range of articles, large range of wire diameter, Multipurpose
2.Big toroidal transformer winder machine with good compatibility, parts are interchangeable
3.High stability, part quality guarantee
GWLJ-0519 Gear type Rectangle transformer coil winding machine
| Wire size | 0.7-2.0mm(Single enamelled copper wire, multi-wire winding, the combined strength does not exceed the maximum value) |
| Finish the outer length/width | 60-300mm (Please note: 60-300mm does not mean such a wide range directly, but refers to adjustment by adjusting some installed parts. If the maximum 300mm is selected, products smaller than 150mm cannot be processed; on the contrary, if the product is selected to be suitable for small products, it cannot be processed. Products larger than 150mm.) |
| Minimum the inner length/width | 45mm(Length is greater than 45mm Width is greater than 45mm) |
| Maximum finished height | 60mm |
| Magazine width | 4-18mm(Optional)Standard configuration (8mm) |
| Magazine perimeter | 720mm |
| Max winding speed | 250rpm/min |
| Controller storage capacity Programs | 50*20set (1000 running programs) |
| Weight | 120KG |
| Dimension | 650*500*700mm |
Features:
1.Rectangular Coil Winding Machine are advanced,strongly built workhorses capable of winding light as well as heavy wire without insulation damage.
2.Copper wire Rectangular winder extremely powerful,maintenance free AC motors for main drive and core rotation.
3.Easily exchangeable magazines secure maximum flexibility.
GW-9751i High efficiency copper wire automatic bobbin winder machine
| Spindles | 1 | Spread Motor | stepping Motor |
| Wire diameter | 0.5 - 2.5mm | Max Speed | 2000rpm |
| Spread Pitch | 0.001 - 9.999mm | Memory | 999 Sequences |
| Spread Width | 600mm(Max) | Power Source | AC 220V 50/60MHZ |
| Winding Width | 200mm(Max) | Weight | 75Kg |
| Main Motor | 500W DC Motor | Dimension | 940*510*430mm |
| Winding turns | 9999 | Special device | An external sensor can be installed to calculate the length |
Features:
1.This single spindle linear synchronal winding machine for highest efficiency
2.This bobbin transformer coil winding machine more convenience by using foot-switch
3.Memory capacity accommodates 999 sequences of parameters with off-power memory retention
GWP8-126 Eight Spindles full Automatic Linear Coil Winding Machine for bobbin transformer
| Number of winding spindles | 8 |
| Spindle speed | 10000rpm |
| Wire diameter | 0.05-0.6mm (more than 0.4mm need to add different accessories) |
| Spindle spacing | 126mm |
| Maximum bobbin outer diameter | 60mm |
| Spindle Inner Diameter | Standard:10mm Special :12mm\14mm |
| Guide pin moving range | X:80 Y:100 Z:70 mm |
| Winding motor power | 1.5KW\2.0KW |
| X\Y\Z axis power | 400W\750W |
| Pressure | 0.4-0.65Mpa |
| Supply voltage | AC220V±10% 50HZ |
| Total power | 2.8KW\4.0KW |
| Machine size | Length:1100mm Width:1000mm Height:1400mm |
| Machine weight | 800Kg |
Description of main components:
| Winding servo motor | Panasonic Japan |
| X/Y/Z-axis servo motor | Panasonic Japan |
| Control System | Weiding high-precision six-axis motion controller |
| Human-machine interface | 7-inch WEINVIEW touch screen |
| Screw guide | Taiwan TBI, grade C accuracy |
| Timing belt | BANDO Japan |
| Bearing | NSK Japan |
| Sensors | Omron |
| Tensioner | High-precision magnetic tensioner |
| Spindle box | Cast iron box |
| Worktable board | Cast iron platen |
| Other mechanical components | Independent design |
1.The control part adopts the most advanced multi-axis motion control system, with excellent performance such as linear and circular interpolation, spiral winding, etc.
2.All moving parts are driven by AC Panasonic servo motors with high speed, accurate positioning and long service life.
3.All important components are imported brands.
Electronic transformer coil winding winder choke automatic toroidal winding coil making machine copper wire Coil Winding Machine with Wire Diameter 0.7-2.5mm Application:
Grewin Industrial Group Co., Ltd. was founded in 1993 to provide cost-effective, high-quality manufacturing solutions for transformer industries.
Whether producing transformers, chokes,magnetics or other vital components,our winding machine are relied upon by countless manufacturers around the world.
1. Can produce different size coil:Toroidal winding machine can select different magazine to complete various sizes of transformer coils.
So whether you are a manufacturer of transformers, chokes or other winding components, Grewin's winding machine are a wise choice. With their precision, flexibility and affordability, they can help you meet your production goals while ensuring the quality of the finished product.
So whether you are a manufacturer of transformers, chokes or other winding components, Grewin's winding machine are a wise choice. With their precision, flexibility and affordability, they can help you meet your production goals while ensuring the quality of the finished product.
PRE-SALE:
1. Strong and professional team of engineers, rich experience
2. Able to provide innovative solutions and quotes in one day.
IN SALE:
1. Delivery time: 5-10 days(standard machine), 30 days(custom)
2. Free consulting service: in-depth understanding of customer needs
3. Provide professional advice: including the choice of parts type and consumable parts of the machine.
AFTER-SALE:
1.24 hours free remote service: video guide and telephone
2. Warranty:1 year after-sales service
GREWIN INDUSTRIAL GROUP CO.,LTD
Add: 2#MeiNian Plaza No.16 DongTing Road,Hexi Distrct | Tianjin | 300040 | China
