Audited Supplier
Product Introduction:
High temperature binder
Product Introduction:
High temperature binder is prepared by adding refractory powder into inorganic or organic binders. Based on the material of refractory bricks, refractory powder with similar physical and chemical properties to refractory bricks is selected to meet the requirements of different refractory bricks.
Product Highlights:
-High bond strength of bonder
-High high-temperature binding power
-Pollution-free on environment
Detail Photo 
Application:
High temperature binder are mainly used for the masonry of refractory products.
GX-2 High-temperature binder is used for the bond between refractory brick and refractory fiber, refactory fiber and metal in industrial furnace below1200ºC.
GX-3 High-temperature binder is used for the bond between refractory materials below 1500ºC.
Technical Data:
| Main performance | ||||
| Item | Type | KL-03 | KL-04 | KL-05 |
| State | Liquid, thickness | Liquid, thickness | Liquid, thickness | |
| Operating temperature(ºC) | 1350 | 1350 | 1500 | |
| Proportion(g/cm) | 1.44~1.84 | 1.20~1.25 | 1.9 | |
| PH | 1.4~2.0 | 8.5~10.0 | 8.0~9.0 | |
| Dynamic viscosity(CP) | 1.40~1.60 | 5.0~8.0 | ||
| Tensile Strength(MPa) | 7.50 | 8.15 | 2.94 | |
| Name Properties | High-temperature bonder | ||
| GX-2 | GX-3 | ||
| Max Service Temperature(ºC) | 1200 | 1500 | |
| Dosage(Kg/m²) | 1.8~3.6 | 2.0~3.5 | |
| Consistency(MM) | 210 | 195 | |
Flexural Bond Strength(Mpa) | 105ºC | 4.5 | 4.0 |
| 1100ºC | 8.9 | 8.1 | |
| 1300ºC | 9.1 | 10.2 | |
| 1400ºC | 11.5 | ||
| Linearchange after Heating(%) | -1.2 | -1.0 | |
| Properties Band | YDM series Binder | High Aluminum Binder | Clay Binder | Acidproof Binder | |
| Max Service Temperature(ºC) | 1500 | 1400 | 1250 | 900 | |
| Dosage(Kg/m²) | 4.5-5.5 | 4.5~5.5 | 5-6.5 | 5-5.5 | |
| Consistency(MM) | 160 | 170 | 180 | 160 | |
| Flexural Bond Strength(Mpa) | 110ºC×24h | 2 | 2 | 2 | 650ºC×3h ≥20 |
| 815ºC×3h | 4 | 4 | 4 | ||
| Linear Changes on Reheating | ºC×3h | 1400 | 1400 | 1200 | 650 |
| % | -0.3 | -0.3 | -0.5 | ±0.5 | |
| Granularity(%) | 110ºC×24h | 3 | 4 | 5 | 8 |
| 815ºC×3h | 40 | 40 | 40 | 40 | |
| Al2O3≥% | 65 | 55 | 40 | SiO2 ≥70% | |
| Acid resistance(≥%) | 95 | ||||
Henan Fireramo Industrial Co.,Ltd. is located in Songlou Industrial Zone, Xinmi City, Henan Province, China, which is one of the largest refractory base in China. The factory of us covers an area of 108,000 Square Meters with more than 1 billion RMB fixed assets. There are around 400 employees in our factory, including 20 board members, 10 technicians, and 4 plant managers. Fireramo is a new technology enterprise specializing in manufacturing, production, sales and consultant of refractory materials for various industry, such as, cement plants, glass factories, steel plants, chemical & oil industries.
Fireramo has been established since 1998. We do both domestic and overseas business. Our products have been sold all over the world, especially to Iran, Turkey, Pakistan, Korea, UAE, Saudi Arabia, Kuwait, Syria, Qatar, Russia, etc. 
Factory Equipment
R&D
Fireramo has its own engineering technology center and testing laboratories, which can meet the testing requirements for various kinds of products and raw materials, and the research and development of new products. At the meanwhile, we have a well-equipped and skilled furnace construction team that can provide users with service items such as furnace design, construction, rapid maintenance and operation technical training, etc.
Capacity
Our factory has two high alumina brick and fireclay brick production lines, two silica brick production lines, two unshaped production lines and two lightweight brick production lines. The total production capacity reaches 148,000 tons, of which the annual output of high alumina clay brick production line is 50,000 tons, the annual output of silica brick production line is 60,000 tons, the annual output of lightweight production line is 18,000 tons, and the annual output of unshaped production line is 20,000 tons.
Q1 : Do you provide free samples?
A1 : Yes, free samples can be provided, the buyer shall bear all the delivery cost.
Q2 : How can you control your quality?
A2 : We have professional QC system for the chemical composition and Physical properties.All the products will be tested before delivery
Q3 : What is your payments terms?
A3 : We can accept 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms.
Q4 : Are you a trading company or manufacturer?
A4 : We are a manufacture and our factory was established in 1998.
Q5 : What standards can you meet?
A5 : We can meet GB, ASTM,JIS,DIN standards. The third party test is acceptable.
