Audited Supplier
Product Name :Low Pressure Stainless Steel Sanitary Hygienic Single Twin Screw Pump for High Viscosity Products
Sanitary screw pump is a single-screw transport pump. Its main working parts are the screw of the eccentric screw (called the rotor) and the screw bushing (called the stator) with the inner surface of the double helical surface. Its working principle is that when the motor drives the pump shaft to rotate, the screw rotates around its own axis on the one hand, and on the other hand it rolls along the inner surface of the bushing, thus forming the sealed chamber of the pump. Each time the screw rotates once, the liquid in the sealing cavity advances by a pitch, and with the continuous rotation of the screw, the liquid is pressed from one sealing cavity to the other sealing cavity in a spiral manner, and finally squeezes out of the pump body. Sanitary Single Screw Pump is used for in all fields widely to feed kinds of medium, running at a constant pressure continuously, without pulse and damage when feeding medium , and change the gauging aim through adjusting rotation speed.
Feeding Medium
This products is applicable for feeding medium which has the following properties
High solid content (diameter of the biggest particle is 50mm) or no soild content
Medium with all viscosities (1mPas ~ 300000mPas)
Medium that is easy to be generated and swelled
Shearing sensitive medium
Medium with erosion
Medium with/without self lubrication
Erosive medium (PH=1~14)
Adhesive medium
Toxicity hazard medium
Structure Diagram of Sanitary Single Screw Pump
| No.1 | No.2 | No.3 | No.4 | No.5 | No.6 | No.7 | No.8 | No.9 | No.10 |
| Outlet | Tie Rod | Stator | Screw Shaft | Universal Joint | Inlet | Connecting Shaft | Filling Seat | Filling Cover | Bearing Seat |
| No.11 | No.12 | No.13 | No.14 | No.15 | No.16 |
| Bearing | Transmission Shaft | Bearing Cap | Coupling | Base | Motor |
Main Parameter of Sanitary Single Screw Pumps
| Model | Flow Rate(t/h) | Electric Power (kw) | RotationSpeed (r/min) | Inlet/outlet (mm) | Connection Ends | DischargePressure (Mpa) |
| CP10-1 | 0.5 | 0.37 | 1400 | 20 | Clamp/union/flange | 0.4 |
| CP15-1 | 1 | 0.55 | 960 | 25 | Clamp/union/flange | 0.4 |
| CP20-1 | 1.5 | 0.75 | 960 | 32 | Clamp/union/flange | 0.4 |
| CP25-1 | 2 | 1.1 | 960 | 32 | Clamp/union/flange | 0.6 |
| CP30-1 | 3 | 1.5 | 960 | 40 | Clamp/union/flange | 0.6 |
| CP35-1 | 5 | 2.2 | 960 | 50 | Clamp/union/flange | 0.6 |
| CP40-1 | 7 | 3 | 960 | 50 | Clamp/union/flange | 0.6 |
| 5.5 | 2.2 | 720 | 50 | Clamp/union/flange | 0.6 | |
| CP45-1 | 9 | 4 | 960 | 50 | Clamp/union/flange | 0.6 |
| 7 | 3 | 720 | 50 | Clamp/union/flange | 0.6 | |
| CP50-1 | 13 | 5.5 | 960 | 65 | Clamp/union/flange | 0.6 |
| 10 | 4 | 720 | 65 | Clamp/union/flange | 0.6 | |
| CP55-1 | 18 | 7.5 | 960 | 76 | Clamp/union/flange | 0.6 |
| 13 | 5.5 | 720 | 76 | Clamp/union/flange | 0.6 | |
| CP60-1 | 22 | 11 | 960 | 89 | Clamp/union/flange | 0.6 |
| 17 | 7.5 | 720 | 89 | Clamp/union/flange | 0.6 | |
| CP65-1 | 30 | 11 | 720 | 80 | Clamp/union/flange | 0.6 |
| CP85-1 | 60 | 15 | 720 | 100 | Clamp/union/flange | 0.6 |
Application
Food industry: ketchup, mashed potatoes, peanut butter, yogurt, fresh cream, ice cream, cheese cubes, whey, beer, wort, yeast, fruit juice drinks, vegetable paste, jam, jelly, etc.
Petroleum industry: conveying crude oil, mixture of crude oil and water, mixture of coal field gas and water, etc.
Advantages
| 1 | Wide range of pressure and flow. The pressure is about 3.4-340 kgf/cm2, and the flow rate can reach 18600cm3/min |
| 2 | The type and viscosity range of the conveyed liquid are wide |
| 3 | Because the inertial force of the rotating parts in the pump is low, it can use a high speed |
| 4 | Good suction performance and self-priming ability |
| 5 | Uniform and continuous flow, low vibration and low noise |
| 6 | Compared with other rotary pumps, it is less sensitive to incoming gas and dirt |
| 7 | Solid structure and installation Maintenance is easy |
Our products are widely applied to dairy, food, beer, beverage, chemical industrial of equipment, and cosmetic industries. All technical aspects have reached the international leading levels and are in conformance with GMP requirements.
- Workshop __________________________________________________________________________
- Sample Room_______________________________________________________________________
- FAQ
- Q1. Are you a trading company or factory?
We are a manufacturing factory.
Q2. What's the payment terms?
For small testing orders,we accept Paypal,Western Union,T/T and credit Card.
For mass orders,we accept T/T and L/C.
Q3.How do you control the quality?
Quality control is very important to avoid material mixing and poor quality.We control the quality from beginning to the end.We
only have 304 and 316L two different materials.100% inspection on raw material.During production,different materials in different place.After materials are finished,we choose 10% for inspection.If there is 0.1% problem in 10%,then no excuse to go ahead for inspecting 100% of the materials.
Q4.How long is your delivery time?
For normal production in 7-10days.For bulk order in 15-25days.
