Audited Supplier
1756-EN2T
Program
Combination
Linear
Continuous
Automatic Control, Protection, Monitoring, Measurement
CE
New
Non-Customized
Stainless Steel
Workstation
Wired
Ethernet
Data
Carton
United States
8517799000
Product Description
Shenzhen Aimiqu Technology Co., Ltd. is a Chinese manufacturer and trading company for PLC electric control cabinet and related spare parts.
we always supply PLCcontrol cabinet with Parts at very competitive price and excellent service. Our products have very good feedback from our clients.
Hot selling brand
Packing and shipping
FAQ
we always supply PLCcontrol cabinet with Parts at very competitive price and excellent service. Our products have very good feedback from our clients.
Technical Specifications for 1756-EN2T
| Manufacturer | Rockwell Automation |
| Part Number/Catalog No. | 1756-EN2T |
| Series | ControlLogix |
| Product Type | Ethernet Communication Module |
| Ethernet-IP Communication Rate | 10/100 Mbps |
| Insulation Voltage | 30 Volts Continuous |
| Integrated Ports | One (1) RJ45; One (1) USB 1.1 |
| Current Draw | 1 Amp |
| Location | Chassis (any slot) |
| Current Rating | 1.2 Amps |
| Slot Width | 1 |
| Operating Temperature | 32 to 140 degrees Fahrenheit (0 to 60 degrees Celsius) |
| UPC | 10612598329103 |
| Power Dissipation | 6.2 W |
| UNSPSC | 32151705 |
| Thermal Dissipation | 21.28 BTU per hour |
About 1756-EN2T
The ab 1756-EN2T is a part of the ControlLogix Communication Module series. It is an EtherNet/IP (Ethernet Industrial Protocol) interface communication module. It supports general messaging, real-time I/O messaging, and information exchange for applications like Real-Time Control, Time Synchronization, and Motion. The 1756-EN2T also has the CIP safety standard by allowing simultaneous transfer of safety and control data and diagnostics information. It uses advanced communication chips and physical media.
The 1756-EN2T supports 10 to 100 Mbps EtherNet/IP communication rates and uses Twisted pair copper media. It supports 256 Logix and 128 TCP/IP communication connections. It can support a maximum of 8 axes for integrated motion on the Ethernet/IP Network and draws 1 A current at 5.1 Volts DC. It has a maximum power dissipation of 5.1 Watts and thermal dissipation of 17.4 BTU/hour. It can be installed in any slot in the ControlLogix Chassis. For wiring, it uses unshielded RJ45, category 5, twisted-pair cable connectors to interface with the controller. The 1756-EN2T is configured using RSLinx software to be used at the workstation. To operate an EtherNet/IP network, parameters such as an IP address, Subnet masks, Gateway, etc. must be defined. The 1756-EN2T bridge has various functions like providing support for messaging, distributed I/O, and tags. It encapsulates messages within standard TCP/IP protocol. ControlNet and DeviceNet network protocols allow it to share a common application layer. It does not require any scheduling or routing table to store information. Other features include a protected mode, an electronic keying, a device level ring network, and a parallel redundancy protocol network support.
The 1756-EN2T is a ControlLogix Communication adapter that supports Ethernet I/P protocol. This module is a single slot module which may be installed to any slot of a ControlLogix chassis. It has One (1) RJ45 port that is used to interface with Ethernet network. It also has a USB 1.1 port that may be used for initial configuration of the module such as firmware Flashing.
Ethernet is a user-friendly and modern protocol that is widely utilized nowadays due to evolution of Industrial Internet of Things (IIoT). Devices with capable of Ethernet protocol are most ready for implanting the emerging technology. Also, Ethernet is an open protocol which means network scalability is far easier to implement as devices are required are not proprietary types.
A single 1756-EN2T module is capable of being simultaneously communicated with a Human Machine Interface (HMI), Supervisory Control and Data Acquisition (SCADA), Programming workstation, Distributed I/O clients, 3rd party devices or any combination these devices. Up to 256 Logix and 128 TCP/IP connections can be accommodated by this module.
This module is capable of being connected to a network with linear topology and it supports 10/100 Mbps communication rate. It is compatible with any ControlLogix Chassis such as 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17 and ControlLogix Power supply such as 1756-PA72, 1756-PA75, 1756-PB72, 1756-PB75, 1756-PC75, 1756-PH75.
The 1756-EN2T supports 10 to 100 Mbps EtherNet/IP communication rates and uses Twisted pair copper media. It supports 256 Logix and 128 TCP/IP communication connections. It can support a maximum of 8 axes for integrated motion on the Ethernet/IP Network and draws 1 A current at 5.1 Volts DC. It has a maximum power dissipation of 5.1 Watts and thermal dissipation of 17.4 BTU/hour. It can be installed in any slot in the ControlLogix Chassis. For wiring, it uses unshielded RJ45, category 5, twisted-pair cable connectors to interface with the controller. The 1756-EN2T is configured using RSLinx software to be used at the workstation. To operate an EtherNet/IP network, parameters such as an IP address, Subnet masks, Gateway, etc. must be defined. The 1756-EN2T bridge has various functions like providing support for messaging, distributed I/O, and tags. It encapsulates messages within standard TCP/IP protocol. ControlNet and DeviceNet network protocols allow it to share a common application layer. It does not require any scheduling or routing table to store information. Other features include a protected mode, an electronic keying, a device level ring network, and a parallel redundancy protocol network support.
The 1756-EN2T is a ControlLogix Communication adapter that supports Ethernet I/P protocol. This module is a single slot module which may be installed to any slot of a ControlLogix chassis. It has One (1) RJ45 port that is used to interface with Ethernet network. It also has a USB 1.1 port that may be used for initial configuration of the module such as firmware Flashing.
Ethernet is a user-friendly and modern protocol that is widely utilized nowadays due to evolution of Industrial Internet of Things (IIoT). Devices with capable of Ethernet protocol are most ready for implanting the emerging technology. Also, Ethernet is an open protocol which means network scalability is far easier to implement as devices are required are not proprietary types.
A single 1756-EN2T module is capable of being simultaneously communicated with a Human Machine Interface (HMI), Supervisory Control and Data Acquisition (SCADA), Programming workstation, Distributed I/O clients, 3rd party devices or any combination these devices. Up to 256 Logix and 128 TCP/IP connections can be accommodated by this module.
This module is capable of being connected to a network with linear topology and it supports 10/100 Mbps communication rate. It is compatible with any ControlLogix Chassis such as 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17 and ControlLogix Power supply such as 1756-PA72, 1756-PA75, 1756-PB72, 1756-PB75, 1756-PC75, 1756-PH75.
FAQ for 1756-EN2T
What is this module's power dissipation?
This module has a 6.2 Watt power dissipation.
What series does this module belong to?
The 1756-EN2T belongs to the ControlLogix series.
Can this module be purchased with a warranty?
Yes, the 1756-EN2T comes with a free one-year warranty from Shenzhen Aimiqu.
What is this module's Insulation Voltage?
The 1756-EN2T has an Insulation Voltage of 30 Volts Continuous.
Where can I send the 1756-EN2T to be repaired?
DO Supply, Inc. offers a variety of repair services for the 1756-EN2T.
What is this module's Current Rating?
The 1756-EN2T has a Current Rating of 1.2 Amps.
Technical Description of 1756-EN2T
The 1756-EN2T is an Allen Bradley ControlLogix Ethernet Communication Module with a 10-100 MB per second Ethernet-IP Communication Rate. 6.2 Watt Power Dissipation. 1.2 Amp Current Rating. 17.4 BTU per hour Thermal Dissipation. 5.1 Watt Power Dissipation.
| Shenzhen Aimiqu Technology Co., Ltd. |
Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field. Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet. And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories . In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr... |
Hot selling brand
Packing and shipping
FAQ
| 1.Who we are We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands 2.Our advantage We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. I will try my best to give you the best price,prove that we are sincere. 3.Our Service Purpose We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal 4.Lead-Time Depending on thr model and quantity you need.So please tell us what you need now 5.Can't find the model you need? We have only shown some models,If the model you need is not found here,please contact us |
