Audited Supplier
LX3122HF IM
CE, ISO
Four Column
Pressing
Automatic
800mm*600mm Max
120mm Max. Other at Request.
40cycles/Min Max.
0.15-2mm
800mm
PP PS Pet PVC BOPS
Container, Clamshell, Tray and Lid
Forming, Cutting, Stacking and Conveying
LXLASTICS
Film with Oil
CE
China
84774000
Product Description
BRIEF
*Video link: https://lxcorp.en.made-in-china.comLX 3in1 is a full electric and complete automatic thermoforming machine which can produce all kinds of disposable packaging like tray,lid,container, clamshell etc. in PP PET BOPS HIPS PVC etc. plastic sheet.
it is a post-trim type machine which can perform forming, cutting ,stacking and counting in 3 separate stations by taking advantage of cam system and servo system .
Also It can combine function of cut-in-place into forming station with steel-rule-knife to perform form and cut at the same station.
Design Feature
Form+Cut+Stack and Form/Cut + Cut+ Stack in the same machine
Cut-in-place with steel-rule-knife is available for identical trimming
Floating knife for cutting tool is available for post-trim
Full Electrical Drive minimizes power consumption and make operation easier
Cam-controlled drive technology ensures 100% precise repetition of each cycle of forming and cutting.
Precise index accuracy utilizing Servo drive system, minimizing plastic scrap
Positive forming and Negative forming(air pressure forming plus vacuuming forming)
Automatic Stacking, Counting and conveying system
Accessing to all digitalized functions by pressing touch screen
Touch screen and programmable PLC control
PID temperature control ensures precise temperature accuracy
Automatic lubrication and center oiling
Little maintenance effort required and long intervals between maintenances
Most of Components are from multi-national suppliers assures a reliability and worldwide compatibilityLateral quick changning tools(moulds) from one side of machine
Use of Steel rule kinfe minimizes cost
1-2days for line kinfe making,mimimizing cost of operation
| Specification LX3122IM | |
| Mould Area | 800*600mm Max. . |
| Depth of Draw under sheet | 120 mm Max (others at request) |
| Depth of Draw above sheet | 30 mm Max. (others at request) |
| Clamping force | 750KN |
| Suitable material | PP PET PS PVC BOPS |
| Sheet Width | 460- 850 mm |
| Material Thickness Range | 0.15-1.5mm |
| Material Roll Diameter | 1000 Max |
| Dry run Speed | 40cycles/min Max. |
| Power Supply | 3-N AC380V±15V ,(others at request) |
| Power consumption | Approx.35kilowatts/hr |
| Air Pressure | 0.7Mpa |
| Air Consumption | 2500 Liters/min |
| Cooling Water Consumption | 13 Liters/min 15° - 20°C |
| Dimensions | 9.5m*2.2m*2.2(L*W*H) |
FAQ
1.What can IM Model do?
It produces clamshell,container,lid, tray and dish with rolled-lip
2.What material IM mdoel can process?
It can mainly process PP PET BOPS PS PVC sheet
3.What is MAX. speed of praticl production?
As far as we tested, it is 33cycles/min for 0.2mm PET . for higher speed , we still need more testing
4.What is Trim-in-place and what is post-trim?
Trim-in-place means forming and cutting inside the same mould .
Post-trim means cutting after forming.
5.what is different among IM 2in1 ,IM 3in1 and IM 4in1?
*IM-2in1 does forming and cutting in the same station with steel-rule-knife.
It can makes any packaging if there is no requirement of making holes on it.
*IM-3in1=IM-2in1+ second cut-press , it can do trim-in-place process and post-trim process . it means it can do cutting after forming station and in forming station.
*IM-4in1=IM-2in1 +second cut-press +thrid cut-press, it can do trim-in-place and post-trim process and also do hole-punching .
6. what is the advantage of trim-in-place ?
* bring indentical trimming for parts made in film with high shrinkage rate like pure PP .
* no wasting time on adjustting accuracy of trimming
*no wasting money to make an independent cutting tool
Technical support
Upon receiving the deposit, we will offer the following technical services:
1. Make drawings of your project for your approval after receiving your samples
2. Provide mould drawings .
3. Provide electric diagram .
4.provide drawings of sensor layout, pneumatic layout, sensor layout and motor layout
5.provide picture of labeling of all electric parts and pneumatic parts.
6. Free technical suggestions on adjusting of equipment layout and application.
5. Equipment upgrading (customers need to pay the cost);
Quality assurance
1. Strictly conforming to ISO9001-2000 quality management system an and Security conforming to CE ;
2. Strict control from purchasing inspection, process inspection to final proofing;
3. Established several QC departments to execute quality control regulations;
4. Detailed quality control examples:
(1) Complete files for quality control and quality feedback;
(2) Strict inspection for the components to assure products free of damage and avoid rust-eaten and paint peeling off later on.
(3) Only qualified components will be assembled and total equipment must be inspected completely before sale.
After sale service
1. we can offer a full training in our factory on operation and maintain
2. Installation and commissioning in buyer's factory is available with all cost caused by visit on buyer's account.
3. The warranty is one year. And after one year of warranty, service is still available with cost on buyer's account if it involves parts changing.
