Audited Supplier
This is a multipurpose Instrument for measuring resistance to laboratory wear and abrasion of such materials as woven and knitted fabrics, footwear, napped and pile fabrics, hosiery, felt, non-woven and coated fabrics, yarns, threads and cordage, plastic films, rubber sheeting, leather, paper and, many other materials.
It is a self-contained instrument which gives direct evaluation of quantitative parameters for resistance to surface abrasion; edge, fold and projection abrasion; roll and fold testing; flex abrasion. Automatic end points which can be provided for all test procedures secure definite results.
Test Principle
Mount sample and abrasion material on the fixture of machine, add specified load and test sample at specified stoke and speed. Inspect abrasion condition after testing a certain of times, or test the times of sample rubbing off to assess sample abrasion resistance property and surface pilling situation, so as to provide reference for improving fabric craft.
Install sample on fixture of instrument with adding a certain of load, and under predetermined stroke and speed, use standard abrasion materials(such as wire mesh, carborundum, etc) to rub sample at specified times so as to check its color changing situation.
| ASTM D3514, D3885, D3886 AATCC 119, 120 JIS L1096; JIS L 1075 Part 7.2 (Test standards needed to be confirmed with user) |
| Model | M013 |
| Testing stroke | 1in(25.4mm) |
| Testing speed | 120r/min |
| Loading weight | 0.5Lb(2pcs),1Lb(2pcs),2Lb(1pc) |
| Tension weight | 0.5Lb(2pcs),1Lb(2pcs),2Lb(1pc) |
| Bottom fixture rotary speed | Approx, 100 times / cycle |
| Counter | 0-999,999 times, adjustable |
| Timing | 0~9 999min |
| Dimensions | 34 x 66 x 47cm ( L x W x H ) |
| Weight | 80kg |
| Power supply | 1∮ AC 220V 5A |
Q: How is your service?
- English operation manual and operation video will guide you how to use it.
- On-site machine training & installation can be provided with certain charges.
Q: What's your warranty period?
Q: What's the payment term?
A: Usually TT, L/C are available. For others, please contact with us for negotiation.
Q: What's your lead time?
Q: Are you able to provide a ISO 17025 calibration certificate?
A: Yes, we generally provide two calibration certificates(optional).
• ISO 17025 certificate provided by a third party inspection company with charges.
• Calibration certificate provided by UTS without charges.
Q: Can you send report of fumigation report?
A: Our packing is composite board, not log, so it do not need fumigation treatment.
Thank You For Always Supporting UTS Products!
