Audited Supplier
GIN-PFC 51200
All The Lift-Time of Machine
1 Year
3 Jaw Puch Former
Manual
High Precision
GS, ISO 9001
New
Sks3
80-81mm
φ16mm
24
15±10
GIN
China
845710
Product Description
GIN-PFC 3- JAW Puch Former
bidirectional unidirectional collet shaper
Features:
·Three jaw chuck
·Clamp firm
·Clear engraving
·Accurate and durable
With up and down left and right adjustment function, it is especially suitable for the processing of oval punches. When using this product, you can quickly polish various shapes of punches
·Multi-angle trimming clamping force is strong
·Center penetration hole
·With bow arm
Clear scale hard handle
It has the function of dressing grinding wheel, and can be used for dressing all kinds of cutting grinding wheel and its Angle composed of straight line and arc
| Part number | 51150 PFB | ||||
| Main features of product | 1. In addition to the PFA features, PFB punch shaper has a special center perforation hole, which can be extended to make the long punch and the top shot. 2. Unable to move left and right due to the perforation design. Therefore, PFB1 accessories are specially designed to be used together with the function of dressing the Angle of the grinding wheel. | ||||
| Product name | Unidirectional punch shaper | ||||
| The number of teeth and precision of the indexing plate | 24,15±5 | ||||
| Height of center | 80-81MM | ||||
| Through-hole diameter | Less than 30MM | ||||
| Clamping bias accuracy | Within 0.005MM | ||||
| Trim wheel R arc radius | Convex arc maximum R48MM | ||||
| Dressing wheel diameter | Max. ∅200MM | ||||
| Trim wheel R arc radius | Concave arc Max R100MM | ||||
| V-groove clamping diameter | 4-30MM | ||||
| Part number | GIN-PFA 51100 | ||||
| Main features of product | 1. The bidirectional punch molding machine is suitable for forming surface grinding machine, which can grind the punch of various shapes accurately and quickly, and can be used for the electrode processing of the discharge machining machine tool. 2. This product is equipped with a bow arm, which has the function of dressing grinding wheel, and can be used for dressing all kinds of cutting sand wheels composed of straight lines and arcs and their angles. 3 Due to the different outer diameter of the workpiece, V-shaped blocks must be used to adjust the gear and adjust its center accuracy within 5UM. | ||||
| Product name | Fine display bidirectional punch shaper | ||||
| The number of teeth and precision of the indexing plate | 24,15±10 | ||||
| Height of center | 80-81MM | ||||
| V-block adjustment amount | 30MM | ||||
| Clamping bias accuracy | Within 0.005MM | ||||
| Trim wheel R arc radius | Convex arc maximum R48MM | ||||
| Dressing wheel diameter | Max. ∅200MM | ||||
| Trim wheel R arc radius | Concave arc Max R100MM | ||||
| V-groove clamping diameter | 4-30MM | ||||
| Upper and lower motion range of block V | 25MM each | ||||
| Part number | GIN-PFC 51200 | ||||
| Main features of product | 1.The three-claw punch shaper is used with the flat wood bed, milling machine, etc., which is easy to clamp, easy to disassemble, convenient and quick to use. 2.Due to the cumulative tolerance of the three-claw chuck, the clamping of different workpieces will be different, so the design has the concentricity adjustment function of the horizontal adjusting machine, and the operation can be adjusted by itself | ||||
| Product name | 3- JAW Puch Former | ||||
| The number of teeth and precision of the indexing plate | 24,15±10 | ||||
| Height of center | 80-81MM | ||||
| V-block adjustment amount | 30MM | ||||
| Three-jaw aperture | 16MM | ||||
| Three jaw chuck repeated holding accuracy | Within 0.015MM | ||||
| Rotation accuracy of main seat | Within 0.003MM | ||||
| Through-hole diameter | 16MM | ||||
| Minimum clamping diameter outside diameter | 2MM | ||||
| Maximum clamping diameter outside diameter | 70MM | ||||
| Minimum clamping diameter inside diameter | 24MM | ||||
| Maximum clamping diameter outside diameter | 64MM | ||||
Detail 1
Multi-angle trimming
Can be used for arc, polygon, round and other Angle molding grinding
Detail 2
Handwheel design
The handwheel design is installed on the handle to make the data positioning accurate
Handwheel design
The handwheel design is installed on the handle to make the data positioning accurate
Detail 3
Support positioning holes save time and effort
The barrel clip shaper features a front-facing ER barrel clip, high rotation accuracy and can be used without adjusting the center, and the fine adjustment accuracy is less than 0.005 through the hole design can grip long workpieces
Q1. Are you a manufacturer or a trading company?
We are a professional CNC equipment company enterprise, and have fittings and accessories. We warmly welcome you to visit our factory.
Q2, Do you accept OEM brands?
Yes, we have OEM service, we have rich OEM experience.
Q3. Are there any samples for quality testing?
Our company does not have samples of auxiliary materials
Q4. Do you have any certificates?
Yes, we have BSCI, ISO, FSC, MPA certificates.
Q5. How do you guarantee quality?
Product quality is the basis of good customer service. On the one hand, we adhere to innovation, the introduction of excellent talents, equipment and technology, fully achieve product quality to meet customer needs, on the other hand, the use of advanced management methods, especially quality inspection management.
Q6. What are your payment terms?
Telegraphic transfer 30% as deposit, 70% before delivery, different amounts determine different payment methods. Before you pay the balance, we will show you photos of the products and packaging.
Q7. What's your delivery time?
Generally, it takes 15 to 40 working days after receiving your advance payment. But the exact delivery time depends on the goods and quantity you order.
