Yoursensor Popular Design Normal or Flash LED Alarm Lamp Use for Barrier

Welcome OEM&ODM orders

1) Logo printing on products;

2) Customized color box or carton;

3) Any your ideas on products we can help you to design and put it into production.

Installation Instructions

(a) Without Bracket Installation

1. Open the package, take out the accessories, and rotate the antenna counterclockwise.
2. Mark the 3 holes as shown in the picture.
3. Drill two 6mm diameter holes and one 10mm diameter hole. Then insert the expansion tube into the 6mm diameter holes and pass the wire through the 10mm diameter hole.
4. Pass the power wire and antenna through the waterproof plug and fix the holder with TA4*30 screws to the mounting position.
5. Connect the wires with terminals.
6. Install the case and make sure the fastener is fixed with the holder. Then screw up the antenna clockwise.

(b) With Bracket Installation

1. Open the package, take out the accessories, and rotate the antenna counterclockwise.
2. Mark the 2 holes as shown in the picture.
3. Drill two 6mm diameter holes and one 10mm diameter hole. Then insert the expansion tube into the 6mm diameter holes and pass the wire through the 10mm diameter hole.
4. Pass the power wire and antenna through the holder and fix the bracket on the wall with TA4*30 self-tapping screws.
5. Pass the power wire and antenna through the waterproof plug and fix the bracket on the holder with PA4*10mm screws.
6. Connect the wires with terminals.
7. Install the case and make sure the fastener is fixed with the holder. Then screw up the antenna clockwise.

 

 

Operation Instructions

 

1. The LED will flicker at 1HZ after power-on.
2. The JP1 switch is used to switch the LED between flickering and lighting. When JP1 is connected, the LED will flicker at 1Hz after power-on; when JP1 is disconnected, the LED will light up after power-on.
3. Danger: The whole product, including the LED, is at high voltage when powered on (Power off before opening the case).

 

 

Technical Specifications

1. Working Voltage: 220VAC
2. Loading Capacity: <3W
3. Flicker Frequency: 1HZ
4. Working Temperature: -20ºC ~ +60ºC
5. IP Level: IP54
6. Size: Φ68*163mm

Application

I. Automatic Gate

 

At the automatic gates of public places like shopping malls and office buildings, the YS430-RGB mini LED warning light flashes or stays on to warn when the gate opens or closes. Its wide voltage range of 12 - 256V adapts to various power supplies. The optional LED light color and normal/flash mode can be adjusted flexibly according to the scene, preventing pedestrians from collisions and ensuring safe passage.

II. Garage Door

 

When the garage door at home or in a commercial area is operating, the warning light can prevent people from entering by mistake. The wide voltage is suitable for multiple power supplies, and the light color and warning mode can be selected as needed. For example, using white light in the always-on mode at night for both auxiliary lighting and warning, and a flashing red light during the day for more prominent warning.

III. Automated Production Line

 

Install the warning light at key positions such as equipment operation and material transfer on the factory's automated production line. The wide voltage ensures normal operation under the complex voltage in the industrial environment. By choosing the appropriate light color and mode, it reminds operators to pay attention to the equipment status and prevent work-related accidents.

IV. Courtyard Door

 

When the courtyard door of a private residence or a residential community opens or closes, the warning light indicates the state change. The wide voltage is compatible with different power supplies. Users can choose their favorite light color and switch the normal/flash mode according to habits and safety needs to enhance the warning and prevent accidents.

 

 

Ningbo yoursensor Electronic Co.,Ltd. is a 10 years experiencedprofessional manufacturer of Sensor/safety beams/lamp flasher/industrial light curtain /Elevator light curtain /Remote/Selector/-Push button and access control system.

Yoursensor product achieved stability,durability and reliability withstandard of lSO, CE,ROHS, The fashion design, high quality prod-uct and nice service make us well selling in Asia, south America.Europe, middle east etc.

We have Well training worker and experienced R&D team to meetthe request from custom for OEM service/ODM design,Even PCBAorder
Yoursensor,Your solution,we are welcome the cooperation bothmainland and overseas

To make sure the quality aboutthe products,we pay highly at-tention to the environment ofworkshop and always focus onthe staff training.

                  PCB were made by ourselvesinstead of simply assembly.
 

At Ningbo Yoursensor Electronic Technology Co., Ltd., we are committed to offering exceptional after-sale support. Connect with us through e-mail, Skype, WhatsApp, Trade Manager, telephone, QQ, WeChat, and more. Our team is ready to assist you with any inquiries or support you may need after receiving your order.

Can we try the sample order first?
A: Yes, we can offer even 1 pc for testing.
What is lead time if we place an order?
A: lf we have the order in stock, it would be 2 working dayslf we don't have the order in stock, it would be 7-20 days.
How to make payment?
A: T/T,Paypal, Western Union, L/C is acceptable
What is the delivery way?
A: DHL, UPS, Fedex, TNT ,EMS, DTDC etc. We will choose the safe and cheapestway for you to reduce your cost.Economic shipping way: by sea, by air transport.For mass order, shipping by sea or by air transport will be good choice.
What's the after-sale service?
A: We will provide the after-sale service by e-mail, skype, whatsapp,trade managertelephone, QQ and wechat etc if you need any assistance from us after receivingthe order.