JH-LB936
Liquid Sealing Leak
Powder
Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing
Starch
Paper Tube and Carton
Cassava Dextrin
Weatherability
Filler
Organic Material
Yellow
Available
Available
Powder or Liquid
J/H
Carton Box/Pallet
25/50/500KGS/ Bag
Made in China
35069900
Product Description
Physical index | Imported modified starch glue | |
Product state | Liquid/solid powder Powder adhesive powder is easy to store | |
Product appearance | Light yellow/milky white | |
Product smell | Slight odor, but not irritating | |
Liquidity | Good flow/dispersion, easy to control the amount of glue | |
Solid content | 55-64% | |
PH value | 9-10 Alkaline (equipment is easy to clean) | |
Toxic substance | It does not contain toxic substances and is an environmentally friendly product used by the same industry in Europe | |
Water content(first labor tube) | 8-11% | |
Flat compression strength | A + A(10-15)% | |
Unit amount of glue used | 8-10% | |
Adapt to the gluing method | Suitable for single/double sided gluing, especially for single side gluing | |
Initial adhesion time | Around 5 seconds | |
Speed relation | High speed glue performs better at high speeds | |
Finished appearance | The surface of the paper tube is the same as the inside, and the inner and outer layers are well bonded | |
Suitable paper | Suitable for all paper | |
Drying time | No drying or high temperature/room temperature for about 1 day | |
Tube reduction | 0.4--0.5% | |
Paper tube moisture return phenomenon | Not easy to regain moisture (alkaline glue) | |
Fine cutting condition | Knife/saw has a long service life | |
Paper tube shrinkage ratio | Small (easy to control inside and outside diameter and length errors) |
Product introduction
Our products are modified starch glue, non-toxic, harmless, non-corrosive and oxidizing, in line with European environmental standards, is currently the European paper tube, paper core industry, gray board paper laminating industry, color printing laminating industry, paper products packaging and other industries are used mature products. In the natural environment, this product is easy to biodegrade, is a new generation of environmentally friendly products.
Product technical indicators:
Product type:modified starch
State:Powder (semi-finished product)/liquid (finished product)
Appearance:Yellow, light brown
Smell: Light
Solubility: completely soluble in water, dissolution parameters attached.
Packaging: products are supplied in bulk, ton bags and small packages (semi-finished products); The finished product can be selected according to customer requirements;
Shelf life: The package is intact, and the semi-finished product can be stored for 12 months in a cool and dry environment; The finished product can be stored for 3 months, please stir well before use to prevent physical delamination, the best bonding effect above 18ºC;
Cleaning method: When the glue is not completely dry, the machine and tools can be cleaned with hot water. For very dry glue can be soaked in hot water, with a brush can be thoroughly cleaned.
Operation requirements: Wear protective gloves and goggles.
Semi-finished products avoid dust accumulation, avoid inhalation, contact with the skin and into the eyes. When using this semi-finished product in large quantities, it is necessary to avoid sparks and flames, and smoking is prohibited.
Storage requirements: The finished product should be kept indoors, and try to prevent icing.
Stability: the temperature of the semi-finished product exceeds 200ºC, which can be quickly decomposed.
Finished product processing method: According to the provided formula, first add water, turn on the blender (900-1400 R.P.M.), then add the corresponding rubber powder, and stir for 60-90 minutes, When using this product (finished glue), stir thoroughly before use until there is no delamination and precipitation before use. This glue is used for high-speed glue, the higher the speed, the better the effect.
In case of accidents, appropriate emergency measures can be taken.
accident | preventive measure |
skin contact | Wash skin with water and soap |
Accidentally get in the eye | Rinse with plenty of water for at least 10 minutes. If discomfort persists, go to the hospital. |
eat by mistake | Drink plenty of water, clean your mouth, nose and throat, and go to the hospital if necessary. |
catch fire | Water, alcohol-free foam, dry powder, carbon dioxide, sand... Almost any fire extinguishing material is suitable. Fire fighting personnel should wear breathing apparatus and protective clothing. |
Product Structure: White powder, PH≥7, easily soluble in water, used with soda and borax.
Physical characteristics: Containing a variety of organic and inorganic ingredients, white or slightly yellowish powder, PH value shows alkaline, easily soluble in water, quick drying and can make it gelatinized into a highly viscous gel.
Method of application
Packaging & Shipping
1. 25KGS/Bag
2. 500KGS/Bag
3. Bag or Bucket