Audited Supplier
LDPE
LDPE
White
Transparent Granules
9002-88-4
Low Density Polyethylene/LDPE
Injection Molding, Extrusion Molding, Compouding
Film, Shopping Bags, Stretch Film
Blow Molding
Thermoplastic Plastics
Ld605 Ld608 1c7a Ld100AC 1I60A Ld607
25kg/Bag
25kg/Bag
VIRGIN
China
3901100090
Product Description
Product Description
Low density polyethylene, also known as high pressure polyethylene (LDPE), is the lightest variety of polyethylene resin, is milky, tasteless, odorless, non-toxic, non-glossy surface waxy particles. It has good softness, extensibility, electrical insulation, transparency, workability and certain air permeability. Its chemical stability performance is good, alkali resistance, resistance to general organic solvents.
Characteristic:
(1) The film is a micro milky transparent color, soft.
(2) cold resistance, low temperature resistance and high temperature resistance.
(3) Good moisture-proof performance, stable chemical performance, insoluble in general solvents.
(4) large air permeability.
(5) poor oil resistance, products can be slowly dissolved.
(6) long-term ultraviolet and thermal action will be aging, affecting its physical properties and dielectric properties.
(7) The melt is prone to degradation when it comes into contact with oxygen.
Film Grade
Blow Grade
Injection grade
(1) The film is a micro milky transparent color, soft.
(2) cold resistance, low temperature resistance and high temperature resistance.
(3) Good moisture-proof performance, stable chemical performance, insoluble in general solvents.
(4) large air permeability.
(5) poor oil resistance, products can be slowly dissolved.
(6) long-term ultraviolet and thermal action will be aging, affecting its physical properties and dielectric properties.
(7) The melt is prone to degradation when it comes into contact with oxygen.
Film Grade
| Item | Test condition | Test Method | Value | Unit |
| Density | ISO 1183 | 0.944-0.955 | g/cm3 | |
| MFR | 190°C/2.16kg | ISO 1133 | 0.03-0.07 | g/10min |
| Tensile strength at yield | ISO 527-2 | 22 | MPa | |
| Elongation at break | ISO 527-2 | >350 | % | |
| ESCR | F50,50°C,100% | ASTM D-1693A | 1000 | h |
| VICAT | ASTM D-1525 | 126 | °C |
Blow Grade
| Item | Test Condition | Test Method | Value | Unit |
| Density | ISO 1183 | 0.950~0.955 | g/cm | |
| MFR | 190°C/2.16kg | ISO 1133 | 1.7~2.5 | g/10min |
| Tensile strength at yield | ISO 527-2 | 24 | MPa | |
| Elongation at break | ISO 527-2 | >600 | % |
Injection grade
| Item | Test Condition | Test Method | Value | Unit |
| MFR | 190°C/2.16kg | ASTM D-1238 | 20 | g/10min |
| Density | --- | ASTM D-792 | 0.954 | g/cm3 |
| Tensile strength at yiled | --- | ASTM D-638 | 28 | MPa |
| Elongation at break | --- | ASTM D-638 | 250 | % |
| Impact tensile strength | --- | ASTM D-1822 | 42 | kJ/m2 |
| ESCR | ASTM D-1693 | 3 | --- | |
| VACIT | --- | ASTM D-1525 | 127 | °C |
Widely used in Pipe,plastic products,bottles,wire and cable,etc.
1) For sample order, products is usually to shipping by UPS, FEDEX or DHL and so on.
2) For regular order, shipments can be arranged by sea, air, door to door , express or economy.
Let us know your requirement, we'll try to save your budget and meet deadine.
