Audited Supplier
HBMEC
Low-Carbon Iron Wire
Square
Customized
Black or Galvanized
Welded
Construction Wire Mesh, Protecting Mesh, Road, Tunnel.Bridge, Concrete Pipes
Black
Welded Mesh
ISO9001
New
5.0mm,6.0mm,8.0mm,10.0mm or Customized
2.2mx5.8m, 2.3mx5.9m,2.4mx6.0m or Customized
100X100mm,150X150mm,200X200mm
High Strength
in Bulk or Pallet
2.4*6m 5.0mm, 6.0mm, 8.0mm, 10.0mm or Customized
Hebei, China
7314200000
Product Description
Welded reinforcing mesh also known as welded wire reinforcement, is a kind of mesh reinforcement. Reinforcing mesh is a highly efficient, economical and flexible for concrete reinforcement, greatly save the construction time and reducing the labor force. It is widely used in road and highway construction, bridge engineering, tunnel lining, housing construction, floor, roof, and walls, etc.
- The welded wire fabric makes them easier to work on.
- There are different diameters of steel reinforcing mesh each suited for a particular application.
- There are different designs of steel reinforcing mesh from bent and rolls to flat sheets.
- As per BS 4482 standards and codes, the stainless steel wire used in the manufacture of the steel reinforcing mesh has a 510MPa tensile strength and 485MPa minimum proof stress.
- The steel reinforcing mesh is rigid making it possible for you to control concrete cover during construction.
- Manufacturers produce steel reinforcing mesh under SANS1024 Standard Specifications.
- The steel bars stay intact whenever immersed in concrete because they are carefully welded in mats.
- You don't have to apply additional surface treatment to the steel reinforcing mesh before use.
- Less field labor needed when making reinforced concrete slabs using this mesh thus drastically speeding up the construction process.
- The mesh is easy to load and unload, and easy to handle at the working site.
- Properly mixed concrete is poured into the mesh and then given time to dry out. The concrete, as it continues to dry out, it grips the steel bars tightly creating bond stress between these two materials. This bond stress is essential because it reduces bending and makes reinforced concrete slabs stronger.
Types of steel reinforcing mesh
Below are different categories of steel reinforced mesh you can purchase for your
construction work.
- Square opening steel reinforced mesh: This mesh has stainless wires that run vertically and horizontally supporting each other while forming small squares.
- Rectangular steel reinforced mesh: This mesh has stainless wires that run vertically and horizontally supporting each other while forming smaller rectangular shapes.
- Welded steel reinforced mesh for building vertical walls.
- Customized types, also known as special steel reinforced mesh.
We have put a full line of high-quality stainless steel welded mesh up for sale and for quick delivery. For more information about our meshes, feel free to give us a call.
1.GERMAN STANDARD DIN488 (SIZE:2150MMX5000MM)
| Ref No. | Std Unit | Longitudinal Wires(mm) | Cross Wires(mm) | Pitch of wire(mm) | Mass(Kg) | Mass(Kg/m2) |
| Q131 | Sheet | 5 | 5 | 150 x 150 | 22.476 | 2.091 |
| Q188 | Sheet | 6 | 6 | 150 x 150 | 32.401 | 3.014 |
| Q221 | Sheet | 6.5/5.0 | 6.5 | 150 x 150 | 33.707 | 3.136 |
| Q295 | Sheet | 7.5/5.5 | 7.5 | 150 x 150 | 44.245 | 4.116 |
| Q378 | Sheet | 8.5/6 | 8.5 | 150 x 150 | 66.659 | 5.157 |
2.Australia/New Zealand Standard AS/NZS 4671:2001(SIZE:6000X2400mm)
| Ref No. | Std Unit | Longitudinal Wires(mm) | Edge Wires(mm) | Cross Wires(mm) | Mass(Kg) |
| SL81 (F81) | Sheet | 7.6 @ 100 | 7.60 @ 100 | 7.60 @ 100 | 105 |
| SL102 (F102) | Sheet | 9.5 @ 200 | 6.75 @ 100 | 9.50 @ 200 | 80 |
| SL92 (F92) | Sheet | 8.6 @ 200 | 6 @ 100 | 8.60 @ 200 | 66 |
| SL82 (F82) | Sheet | 7.6 @ 200 | 5.37 @ 100 | 7.60 @ 200 | 52 |
| SL72 (F72) | Sheet | 6.75@ 200 | 4.77 @ 100 | 6.75 @ 200 | 41 |
| SL62 (F62) | Sheet | 6 @ 200 | 4.77 @ 100 | 6 @ 200 | 33 |
| SL52 (F52) | Sheet | 4.77 @ 200 | 4.77 @ 100 | 4.77 @ 200 | 21 |
3.BRITISH STANDARD BS4483
| Ref No. | Std Unit | Longitudinal Wires(mm) | Cross Wires(mm) | Pitch of wire(mm) | No. of sheet per ton | Mass(Kg/m2) |
| A393 | Sheet | 10 | 10 | 200 x 200 | 15 | 6.16 |
| A252 | Sheet | 8 | 8 | 200 x 200 | 22 | 3.95 |
| A193 | Sheet | 7 | 7 | 200 x 200 | 29 | 3.02 |
| A142 | Sheet | 6 | 6 | 200 x 200 | 40 | 2.22 |
| A98 | Sheet | 5 | 5 | 200 x 200 | 57 | 1.54 |
PACKAGE & SHIPPING
Packaging steps:
Each piece put in on carton box, wood case, Plastics Packaging, pallet, etc.
Mode of shipping:
Shipping by sea or car.
By sea for batch goods;
Customs specifying freight forwarders or negotiable shipping methods.
Customize services
We can produce many kinds of Steel Wire Mesh products,if you have your own design or have specificationdrawing,we can make products as your requirement.
If you don't have any idea, please tell us where will it be using, we will give you some specification to refer,and we can provide the drawing also.
FAQ
Q1. How can we quote for you?
Please send us enquiry by email, with all the technical drawings you have. Such as material grade, tolerance, machining demands, surface treatment, heat treatment, mechanical property requirements, etc. Our specialized engineer will check and quote for you, we would appreciate the opportunity and will respond in 3-5 working days or less.
Q2. How can I get a sample to check your quality?
After price confirmed, you can requiry for samples to check quality.
If you need the samples, we will charge for the sample cost.
But the sample cost can be refundable when your quantity of first order is above the MOQ.
Q3. Can you do OEM for us?
Yes, the product packing can be designed as you want.
Please feel free to contact us if you have any question.
