Audited Supplier
Inner fin tube; Internally finned tube
Short DescriptionThe inner finned tube is a new type of high efficiency heat exchange tube. Internally finned heat exchange tubes are widely used in air coolers,air compressor intercoolers,air compressor aftercoolers of Ingersoll Rand,Atlas Copco air compressors etc.
Product Detail
Internally finned tube is mainly used in nuclear power, pharmaceuticals, edible oil refining, petroleum, chemical industry, hydraulic, energy-saving transformation, environmental engineering and other fields, with heat exchange function.
The advantages are reflected in high heat exchange efficiency, sufficient heat exchange, stable quality, small volume, and low resistance.
Mainly suitable for use in gas-liquid exchange, mixed gas condensation, post cooling treatment of compressor gas, gas heating and other fields. The effects of evaporation, condensation, purification and crystallization, solvent recovery, and tail gas recovery are particularly significant, and are highly praised and trusted by users.
This condensing tube can be made of 304, 316L stainless steel, pure copper, etc., and can be customized with a heat exchange area of less than 1 square to 2000 square meters.
Over the past few years of operation, it has been proven to have excellent performance and is an ideal choice for replacing traditional spiral plate heat exchangers, tube heat exchangers, and plate and plate heat exchangers. It has a small footprint, convenient installation and maintenance, energy conservation and emission reduction, greatly improving production efficiency for users and saving a lot of production and maintenance expenses.
The internally finned tube heat exchanger is a new type of heat exchanger developed and produced based on the characteristics of gas-liquid heat exchange. Its design changes the traditional design method by adding internally finned tubes to increase the heat exchange area on the air side (inside the tube), improve the total heat transfer coefficient, and solve the problem of heat exchange imbalance caused by different thermal conductivity coefficients of the heat exchange medium. The energy-saving effect is significant, At the same time, it reduces the consumption of cooling water.
Internally expanded finned heat exchange tubes have excellent characteristics such as good strengthening effect, high finning efficiency, high technical content, and no significant pressure loss. They are emerging ideal gas heat exchange components in China.
Internally expanded finned tube heat exchangers are mainly used in industries such as petroleum, chemical, pharmaceutical, metallurgy, power, power, refrigeration, heat pumps, and food.
The main applicable working conditions include: (1) cooling and heating of various process gases; (2) Condensation of various process gases; (3) Recovery, cooling, and condensation of various process gas exhaust gases; (4) High (low) viscosity liquids and water heat exchange conditions;
The heat exchange efficiency is greatly improved, and the energy-saving and water-saving effects are significant
Capable of withstanding high temperature and pressure, with low resistance drop
The heat exchanger has a small volume and occupies a small area
Low investment and short return period
Reduce maintenance costs for users
Product Display
We have a professional sales and technical team.
We design solutions and provide product cunstomization for you. Solutions
Now we have production facilities for manufacturing various types of finned tubes as mentioned below,
EXTRUDED FIN TUBE (Bimetallic Fin Tube&Integral Monometallic Low Fin Tube)
INNER FIN TUBE
'G' TYPE FIN TUBE (EMBEDDED FIN TUBE)
'L' 'LL' 'KL' TYPE FIN TUBE (WRAP AROUND FIN TUBE)
LASER WELDED FINNED TUBE
HIGH FREQUNECY WELDED FIN TUBE(Including Serrated Finned Tube)
| PRODUCT | TYPE | TUBE MATERIAL | FIN MATERIAL | TUBE SIZE | FIN SIZE |
| Heat Exchanger Finned Tube | Extruded Fin Tube | All Kind of Material can be applied | Aluminum A1100 | 15.88~50.8 | 7~11.5FPI |
| Fin Height Max 16mmH | |||||
| L-Foot Fin Tube | All Kind of Material can be applied | Copper C1100, C1220 | 12.70~50.8 | 7~11.5FPI | |
| (Wrap On Type) | Fin Height Max 16mmH | ||||
| G-Fin Tube (Embedded Type) | Aluminum A1100, A1050, A1060 | ||||
| High Frequency Welded Finned Tube | A179 Carbon Steel Tube | Carbon Steel Tube | 12.70~160 | 1.5~7FPI | |
| Stainless Steel Tube | Stainless Steel Tube | 0.8~3.2mm. Thickness | |||
| Alloy Steel Material | Alloy Steel Material | ||||
| Integral Copper & Copper Alloy High Finned Tube | C12200, C11000, C70600 | C12200, C11000, C70600 | 15.88~22.23 | 5~9FPI | |
| Max 12mm. H | |||||
| Oval Finned Tube | Carbon Steel Tube | Carbon Steel Tube | All Size Available | 5~15FPI | |
| Stainless Steel Tube | Stainless Steel Tube | ||||
| Alloy Steel Material | Alloy Steel Material | ||||
| Copper & Copper Alloy Tube | Copper & Copper Alloy Tube | ||||
| Monometallic Fin Tube | Low Fin Tube | Carbon Steel, stainless steel, titanium, copper, brass, nickel alloy, etc. | - | 9.52~40 | 12, 16, 19 28 FPI, etc. |
| Turbo-C Tube | |||||
| Turbo-E Tube | |||||
| Corrugated Tube | All Kind of Material | - | 6.35~40 | 2~9FPI |
EXTRUDED FIN TUBE (BIMETALLIC FIN TUBE)
EXTRUDED FINNED TUBE----This fin type is formed from a bi-metallic tube consisting of an aluminium outer tube and an inner tube of almost any material.
The Extruded Fin Tube also known as Bimetallic Fin Tube is one of the most preferred finning processes for various applications.
Heat Transfer Efficiency: Excellent
Application
Aftercoolers, air coolers, air heaters, charge air chillers, condensers, convection heaters, electric heaters, evaporators, fluid coolers, gas coolers, heat pipes, hydrogen coolers, industrial tumble dryers, intercoolers, immersion heaters, oil coolers, radiators, refrigeration, solvent recovery and steam to air heat exchangers.
HFW Serrated Finned Tubes is short for High Frequency Welded Helical Spiral Serrated Finned Tubes.
Laser Welded finned tube:
Elliptical Finned Tube:
To browse more products, please click here
DATANG STEEL PIPE Co., Ltd is a reputed manufacturer and wholesaler that export to global markets for 17 years.
You will find a extensive range of Finned tubes,Fin tube heat exchanger,Air cooler,Radiator,Economizer,Condenser,Vaporizer,Air Drier in Datang.
We have a large amount of spot inventory: high quality carbon steel seamless pipe, ERW pipe, SSAW pipe, alloy steel pipe, etc. The pipe fittings and flanges are also available.
Welcome to visit our factory and looking forward to cooperate with you.
Learn more about us,please click here 
More customized finned tube heat exchangers,Click here
FAQ
Q1:Are you a factory or trade company?
A1: A Factory and A subsidiary international trade company for export.
Q2: What can you provide?
A2: Our company is a professional manufacturer for Radiator and Heat Exchanger Equipment and various Fin Tubes.
Q3:Where is your factory?
A3:Our company is located in Cangzhou city, Hebei province, China, which is well equipped with kinds of machines.
Q4: How do you control quality?
A4: Inspection & Guarantee Certificate is supplied with shipment, and the Third Party Inspection is available.
Q5: What are the advantages of your company?
A5: We have many professional and technical personnel, more competitive prices and better after-dales service than other companies.
Q6: Can you arrange the shipment?
A6: Sure, we can help you with the shipment. We have forwarders who have cooperated with us for many years.
Q7: How about the delivery time?
A7: It is based on the order, normally within 30 days after receiving your advance payment.
Q8: Can you provide sample?
A8: Small samples in store can be provided for free.
Please Contact me for more info today!
