Audited Supplier
LX-RF09A
Touch Screen Silver Paste
Guangdong, China
Longxin
Lx-RF09A
Longxin
Plastic Bucket
20-25kg/bucket
China
Product Description
The pricing for the Foshan Longxin New Material Co., Ltd.'s High-Quality Conductive Silver Powder is attractively tiered to cater to diverse purchasing needs: For 100 to 499 grams, the price is an exceptional $1.44 per gram. Opting for 500 to 999 grams brings the cost down to just $1.37 per gram. For bulk purchases exceeding 1000 grams, enjoy a highly competitive rate of $1.30 per gram.
Model | RF-09A |
Application Areas | Low temperature curing paste |
Average particle size (μm) | 1.20-2.40 |
Bulk density (g/cm³ ) | 1.20-2.00 |
Tap density (g/cm³ ) | 2.00-3.50 |
Specific surface area m²/g | 0.40-0.80 |
Morphology | Flake powder |
Shipping solutions tailored to your specific quantity needs are currently being refined for optimal service. The total shipping cost will be expertly negotiated to ensure a fair and satisfactory arrangement.
Ensuring maximum protection for your investment, every transaction processed via is fortified with robust SSL encryption and PCI DSS data safeguarding protocols. You are entitled to a standard refund policy, which allows you to claim a refund if your order is not shipped, is incomplete, or arrives with any issues. Rest assured, provides comprehensive protection for all orders placed and paid for on their platform, giving you complete peace of mind.
Foshan Longxin New Material Co., Ltd. is renowned for its cutting-edge innovations and dedication to quality, making it a leader in the industry.
Q: How many days is the price valid for?
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
