Audited Supplier
CPE350
WiFi Bridge
AP+STA
Built-in
300Mbps
24V
13dBi
White
ISO9001, RoHS, CE
80.211A/N
300Mbps
24V Passive Poe
3km Distance
High Gain Panel Antenna
with LED Display, Very Easy to Set
OEM & ODM
Carton
11a/n 300Mbps data rate
China
8517629900
Product Description
500mW RF Power Outdoor PTP PTMP build in 14dBi Panel Antenna
Description:
CPE-350D is an 5.8G 300Mbps 3KM+ distance outdoor CPE/Wi-Fi Bridge support PoE in and PoE out, It with LED display to show the Channel, IP address and Signal Strength, then with slide switch to change the operation mode, easy to configure the PTP/PTMP connection, advised to install for long range data transmission like CCTV/wireless security/village wireless coverage.
Besides the data transmission, it work as an outdoor PoE switch as LAN port support PoE out for CCTV/IP Camera. Cost saving and easy to find a place to install CPE350D itself and save device cost in long range wireless security.
Main Features:
ABS weather-proof shell, temperature adaptive and board protective .
CPE-350D with ABS waterproof, dust proof and sunscreen shell, avoid the damage from dust, thunderstorm weather. Then PCB board with ESD and port surge protection, adaptive to various environment, the working temperature can be normal at -40ºC to 55ºC. Suit for any country.
300Mbps high speed, Atheros industrial chipset, wider application
CPE-350 comply with IEEE 802.11a/n standard, 300Mbps high speed, with Atheros industrial CPU, it is a Wi-Fi bridge with low power consumption, strong security. With PTP, PTMP, bridge operation mode, widely be used in voice, video, data transmission in long range wireless monitor industrial.
High Power, 14dBi High Gain Antenna, Long Range Wi-Fi Device in market.
CPE-350D with external power amplifier, 300mW true power, 14dBi high gain antenna, the Wi-Fi range is more than 3000 meters, it is the device with most stable performance in long range, max load users, longest Wi-Fi range.
Simple to Configure
It with slide switch to change the operation mode; then with LED display to show and configure the IP address, channel,no need to access into GUI, avoid the complex setup program, simple to check the working status.
Support Power over Ethernet, including PoE in and PoE out
The device has integrated Power over Ethernet (PoE) for easy installation and lower cost. The WAN port support 24V/48V PoE in, make device can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure; The LAN port support 24V/48V PoE out if enabled in PoE out function in firmware. Can work as a passive PoE switch, easy to provide PoE power for IP Camera/CCTV, saved much material cost and human cost. (Mark: LAN port can't connect to NON-POE device if PoE out function enabled)
Spec:
CPE-350D is an 5.8G 300Mbps 3KM+ distance outdoor CPE/Wi-Fi Bridge support PoE in and PoE out, It with LED display to show the Channel, IP address and Signal Strength, then with slide switch to change the operation mode, easy to configure the PTP/PTMP connection, advised to install for long range data transmission like CCTV/wireless security/village wireless coverage.
Besides the data transmission, it work as an outdoor PoE switch as LAN port support PoE out for CCTV/IP Camera. Cost saving and easy to find a place to install CPE350D itself and save device cost in long range wireless security.
Main Features:
ABS weather-proof shell, temperature adaptive and board protective .
CPE-350D with ABS waterproof, dust proof and sunscreen shell, avoid the damage from dust, thunderstorm weather. Then PCB board with ESD and port surge protection, adaptive to various environment, the working temperature can be normal at -40ºC to 55ºC. Suit for any country.
300Mbps high speed, Atheros industrial chipset, wider application
CPE-350 comply with IEEE 802.11a/n standard, 300Mbps high speed, with Atheros industrial CPU, it is a Wi-Fi bridge with low power consumption, strong security. With PTP, PTMP, bridge operation mode, widely be used in voice, video, data transmission in long range wireless monitor industrial.
High Power, 14dBi High Gain Antenna, Long Range Wi-Fi Device in market.
CPE-350D with external power amplifier, 300mW true power, 14dBi high gain antenna, the Wi-Fi range is more than 3000 meters, it is the device with most stable performance in long range, max load users, longest Wi-Fi range.
Simple to Configure
It with slide switch to change the operation mode; then with LED display to show and configure the IP address, channel,no need to access into GUI, avoid the complex setup program, simple to check the working status.
Support Power over Ethernet, including PoE in and PoE out
The device has integrated Power over Ethernet (PoE) for easy installation and lower cost. The WAN port support 24V/48V PoE in, make device can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure; The LAN port support 24V/48V PoE out if enabled in PoE out function in firmware. Can work as a passive PoE switch, easy to provide PoE power for IP Camera/CCTV, saved much material cost and human cost. (Mark: LAN port can't connect to NON-POE device if PoE out function enabled)
Spec:
| Model | CPE350D |
| Chipset | AR9344 |
| Flash | 16MB |
| RAM | 64MB |
| Standard | IEEE802.3, IEEE 802.11n, IEEE 802.11a |
| Frequency | 5.150GHz-5.825GHz |
| Channel | CH36 ~CH165 |
| Modulation | OFDM = BPSK,QPSK,16-QAM,64-QAM;DSSS = DBPSK,DQPSK,CCK |
| Data Rate | 300Mbps |
| RF Output Power | ≤ 26dBm |
| Antenna | 14dBi Dual-polarized panel antenna |
| WAN | 1 * 10/100Mbps RJ-45 WAN Port, support 24V or 48V PoE in (Based on the PoE adapter) |
| LAN | 1 * 10/100Mbps RJ-45 LAN Port, support 24V/48V PoE out (Based on PoE in, less than 13W) (Notes: If enabled PoE out function in firmware, then LAN port can't connect with NON-POE device) |
| LED Display | 1 * LED display with F(function) and S(select) buttons, show and set operation mode, channel, IP address, signal strength. |
| Slid Switch | Operation mode switch, H mean host, AP mode; C mean client, Repeater mode |
| Reset | 1 * Reset Button, press 1 second, work with slid switch to change the operation mode; Press 10 seconds, the device will revert to factory default settings. |
| Power | Input: POE 24V/1A or 48V/0.5A PoE adapter |
| LED Light | Power, Wi-Fi, WAN, LAN |
| Maxi Power Consumption | < 10W |
| Water-proof Level | IP65 |
| Size(mm) | 261.9*88.2*58.2mm |
| Working Temperature | -30°C ~ 55°C Extreme Working Temperature can be -40°C ~ 70°C |
| Storage Temperature | -40°C ~ 70°C |
| Humidity | 5% ~ 95% (Non-condensing) |
| Operation Mode | AP, Repeater |
| Firmware Function | SSID broadcast |
| Multiple SSID up to 4 | |
| SSID hide | |
| MAC filter: support while/black list | |
| WiFi timed on/off | |
| Multicast acceleration | |
| User Isolation | |
| VLAN pass through | |
| Security: OPEN,WPA,WPA2,WPA-PSK,WPA2-PSK | |
| Support RF power adjustable based on environment | |
| End user access number limited to 64 | |
| Network Function | VLAN setting |
| DHCP server | |
| Cloud server | |
| Device Management | Backup the configuration information |
| Restore the configuration information | |
| Reset to factory default settings | |
| LAN PoE out disable/enable | |
| Device reboot: reboot immediately or timed reboot | |
| Firmware upgrade | |
| Time management: including system time and time synchronization | |
| System log | |
| Support WEB GUI management | |
| Support cloud remote management | |
| Support soft AC management |
