Audited Supplier
3011
None
None
None
White
Liquid
Acrylic
Roller
Finish Coat
Air Drying
ISO14001, CCC, RoHS, ISO9001
Steel
Film Forming Matter
Conversion Type
Environmental Protection
47±1%
5-7day
23ºC
25ºC
huide
Barrel
50 kg/barrel, 200 kg/barrel and 1 ton /IBC barrel
China
39069090
Product Description
Diagnose the ground and determine the construction plan
The ground has the following conditions, please be sure to contact us, we will provide you with professional construction solutions according to your ground conditions
Why is 4H hardness recommended?
Because nails and cement hardness is 2H
Regular floor paint nails can scratch,
Only 4H hardness can make the floor paint last as long as new.
Due to the difficulty of water-based floor paint technology, 90% of the current market
The above are 1H hardness. The hardness of the ground drilling inclusive version reaches 2H construction Simple more suitable for leaving the place, plant workshop parking lot is recommended 4H hardness professional version floor to ensure high strength use. At present
Construction costs continue to increase, labor is the most important cost, build Customers choose better quality materials to achieve higher cost performance.
Why not peel with our products?
Selected high-end epoxy resins
Higher wear and hardness
The use of epoxy resin is the true epoxy floor
Proportion of emulsion content
3011 Inorganic floor paint paint test value
| test item | result | descr |
| viscosity | 95±3KU | Stromer viscometer test |
| pH value | 9.5 | pH paper test |
| glossiness | 3±0.5° | 60°angle |
| hardness | 4H | Mitsubishi pencil hardness |
| covering power | 90±1% | C84-111 reflectance measuring instrument test |
| adhesive force | Lv. 0 | White grid, level 0 is the best, level 5 is the worst |
Water resistance adhesion | Lv. 1 | White grid, level 0 is the best, level 5 is the worst |
| geothermal reservoir | normal | 50ºC,30 day |
| store away in winter | normal | ternary cycle |
600μm thick coating | non-cracking |
| water-tolerant | normal | White paint test 48h |
| ethanol-tolerance | normal | White paint test 48h |
| Soy sauce tolerance | It's stamped. It's light | White paint test 48h |
| Pepper resistant oil | It's stamped. It's light | White paint test 48h |
| Toning stability | normal | 50ºC,30 day |
| Heat storage 30 days scraper | normal | 50ºC,30 day |
| tensile adhesive strength | >4.9MPa | Normal temperature curing for 7 days test |
Comparison of 3011 inorganic floor paint and epoxy floor paint
| Contrast item | WJ-3011 Inorganic floor | epoxy floor coating |
| environmental protection | Water-based single component, non-toxic and odorless | The VOC is higher, and the pungent smell is stronger |
| abrasive resistance | The wear coefficient is 0.01 | Wear coefficient 0.03-0.05 |
| delamination resistance | The adhesion is 0, and the tensile bond strength can reach 4.9MPa | Picking substrate, high humidity construction is easy to delamination |
| Super weather resistance | Ultraviolet light exposure >400h, powder ≤1, discoloration ≤2 | Ultraviolet radiation is easy to age and powder |
| Short construction period, simple maintenance, low maintenance cost | The opening time of single component is long, the construction interval between layers is short, and it can adapt to a variety of substrate construction | The two-component opening time is short, the substrate requirements are high, and the humidity requirements are high |
The advantages of our products
1.30 days fastness test
2.Adhesion test
3.Compression test
4.Fast drying time
Suitable for the environment
Construction case
Effect display
FAQ
What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.
Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website
Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so
What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or PayPal:
30% deposit in advance, 70% balance against the copy of B/L.
What is the product warranty?
We warranty our materials and workmanship. Our commitment is to your satisfaction with our products. In warranty or not, it is the culture of our company to address and resolve all customer issues to everyone's satisfaction
Do you guarantee safe and secure delivery of products?
Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge.
HIGH GRADE WHOLESALE STYRENE ACRYLIC COPOLYMER EMULSION CAS 025586-20-3
STYRENE ACRYLIC EMUSLION
WHOLESALE STYRENE ACRYLIC EMUSLION
SUPPLIERS STYRENE ACRYLIC EMUSLION
CHINA STYRENE ACRYLIC EMUSLION
