Audited Supplier
5RK90GN-CF
Industrial
Constant Speed
Gpg
Driving, Control
Protection Type
4
Direct on-line Starting
ISO9001, CCC, CE UL
Gpg
GPG
Carton
China
8501510090
Product Description
| AC Gear Motor | |||||||
| 4 | RK | 25 | R | C | C | F | G10 |
| Outer Diameter | Motor Type | Power Capacity | Speed Motor | Votalge | Output Shaft Shape | Accessories | Derived Code |
| 2 - 60mm 3 - 70mm 4 - 80mm 5 - 90mm 6 - 100mm | IK - Induction RK - Reversible TK - Torque | 6 - 6W 15 - 15W 40 - 40W 60 - 60W 90 - 90W 120 - 120W 140 - 140W 180 - 180W 200 - 200W 250 - 250W | R | A -1 Phase 110V C - 1 Phase 220V C2 - 1 Phase 110V/220V S - 3 Phase 220V S2 - 3 Phase 220V/380V S3 - 3 Phase 380V S4 - 3 Phase 440V SS3 - 3 Phase 220V/380V | A - Round Shaft C - Toothed Shaft | T/P - Thermally Protected F - Fan M - Electro-manetic Z - Damping | Dimension Shaft Length |
| AC Gearhead | |||||
| 4 | GN | 60 | K | G12 | T |
| Outer Diameter | Motor Shaft Shape | Gear Ratio | Bearing Model | Output Shaft Diameter | Installation Method |
| 2 - 60mm 3 - 70mm 4 - 80mm 5 - 90mm 6 - 104mm | GN - Bevel Gear Shaft GU - Bevel Gear Shaft GS - Strengthen T-shaped installation GZ - Right-angle gearbox GM - Intermediate gearbox | 60 - 1:60 | K - Standard Rolling Bearings RT - Right Angle RC - Right Angle Hollow | G12 - Ф12mm | L - Screw Hole T - Through Hole |
| Specifications of Motor | |||||||||||||||||||
| Motor Type | Motor Model No. | Description | Rating | Start Condenser | Gear Model No. | ||||||||||||||
| Cylindncal Output Shaft | Pinion Cut Output Shaft | Force | Peripheral Wave No. | Valtage | Current | Start Turning Moment | Turning Moment | Revolving No. | Capacity | Resistance Voltage | Pairing Bearing | Middle Gear | |||||||
| ( W ) | ( Hz ) | ( V ) | ( A ) | ( gcm ) | ( gcm ) | ( rpm ) | ( uF ) | ( V ) | |||||||||||
| Rerersible Motor | 4RK25A-A | 4RK25GN-A | 25 | 50 | 110 | 0.60 | 1950 | 1950 | 1250 | 8 | 250 | 4GN-K | 4GN10X | ||||||
| 60 | 110 | 0.55 | 1650 | 1620 | 1500 | 7 | |||||||||||||
| 4RK25A-C | 4RK25GN-C | 50 | 220 | 0.30 | 1950 | 1950 | 1250 | 2 | 500 | 4GN-K | 4GN10X | ||||||||
| 60 | 220 | 0.27 | 1650 | 1620 | 1500 | 1.8 | |||||||||||||
| 4RK30A-A | 4RK30GN-A | 30 | 50 | 110 | 0.70 | 2400 | 2350 | 1250 | 10 | 250 | 4GN-K | 4GN10X | |||||||
| 60 | 110 | 0.65 | 1950 | 1950 | 1500 | 8 | |||||||||||||
| 4RK30A-C | 4RK30GN-C | 50 | 220 | 0.35 | 2400 | 2350 | 1250 | 2.5 | 500 | 4GN-K | 4GN10X | ||||||||
| 60 | 220 | 0.32 | 1950 | 1950 | 1500 | 2 | |||||||||||||
| 4RK40A-A | 4RK40GN-A | 40 | 50 | 110 | 0.80 | 3250 | 3250 | 1250 | 16 | 250 | 4GN-K | 4GN10X | |||||||
| 60 | 110 | 0.75 | 3600 | 2600 | 1500 | 14 | |||||||||||||
| 4RK40A-C | 4RK40GN-C | 50 | 220 | 0.40 | 3250 | 3250 | 1250 | 4 | 500 | 4GN-K | 4GN10X | ||||||||
| 60 | 220 | 0.38 | 2600 | 2600 | 1500 | 3.5 | |||||||||||||
| Induction Motor | 4IK25A-A | 4IK25GN-A | 25 | 50 | 110 | 0.55 | 1650 | 1950 | 1250 | 7 | 250 | 4GN-K | 4GN10X | ||||||
| 60 | 110 | 0.50 | 1380 | 1620 | 1500 | 6 | |||||||||||||
| 4IK25A-C | 4IK25GN-C | 50 | 220 | 0.28 | 1650 | 1950 | 1250 | 1.8 | 500 | 4GN-K | 4GN10X | ||||||||
| 60 | 220 | 0.25 | 1350 | 1620 | 1500 | 1.5 | |||||||||||||
| 4IK30A-A | 4IK30GN-A | 30 | 50 | 110 | 0.65 | 2050 | 2350 | 1250 | 10 | 250 | 4GN-K | 4GN10X | |||||||
| 60 | 110 | 0.60 | 1750 | 1950 | 1500 | 8 | |||||||||||||
| 4IK30A-C | 4IK30GN-C | 50 | 220 | 0.33 | 2050 | 2350 | 1250 | 2.2 | 500 | 4GN-K | 4GN10X | ||||||||
| 60 | 220 | 0.30 | 1750 | 1950 | 1500 | 2 | |||||||||||||
| External Dimension | |||||||||||||||||||
| Type | Reduction Ratio | L1(mm) | L2(mm) | L3(mm) | |||||||||||||||
| 4IK(RK)25A(GN) | 1:3 ~ 1:20 | 86 | 32 | 118 | |||||||||||||||
| 4IK(RK)30A(GN) | 86 | 32 | 118 | ||||||||||||||||
| 4IK(RK)40A(GN) | 101 | 32 | 133 | ||||||||||||||||
| 4IK(RK)25A(GN) | 1:25 ~ 1:180 | 86 | 44 | 130 | |||||||||||||||
| 4IK(RK)30A(GN) | 86 | 44 | 130 | ||||||||||||||||
| 4IK(RK)40A(GN) | 101 | 44 | 145 | ||||||||||||||||
| Gear Head-Torque Table (kg.cm) | |||||||||||||||||||
| ( kg.cm x 9.8 ÷ 100 ) = N.m | |||||||||||||||||||
| r/min | 500 | 300 | 200 | 150 | 120 | 100 | 75 | 60 | 50 | 30 | 20 | 15 | 10 | 7.5 | 6 | 5 | 3 | ||
| Gear Redcution Ratio | 50Hz | 3 | 5 | 7.5 | 10 | 12.5 | 15 | 20 | 25 | 30 | 50 | 75 | 100 | 150 | 200 | 250 | 300 | 500 | |
| 60Hz | 3.6 | 6 | 9 | 15 | 18 | 30 | 36 | 60 | 90 | 120 | 180 | 300 | 360 | 600 | |||||
| Permissible Load | 25W | kg.cm | 4 | 6.7 | 10 | 13.3 | 16 | 20 | 26.7 | 32 | 39 | 65 | 80 | 80 | 80 | 80 | 80 | 80 | 80 |
| 30W | kg.cm | 4.8 | 8 | 12 | 16 | 20 | 24 | 32 | 38 | 45 | 76 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | |
| 40W | kg.cm | 6.7 | 11 | 16 | 21.3 | 28 | 33 | 42 | 54 | 65 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | |
| Note: Speed figures are based on synchronous speed, the actual output speed, under rated torque conditions, is about 10~20% less than synchronous speed. Grey background indicates: output shaft of geared motor rotates in the same direction as output shaft of motor White background indicates: rotation in the opposite direction | |||||||||||||||||||
FAQ
Q: How about your company?
A: We are a gear motor factory established in 1995 and located in Wenzhou city of china.
We have more than 1200 workers. Our main product is AC micro gear motor 6W to 250W,
AC small gear motor 100W to 3700W, brush DC motor 10W to 400W, brushless motor10W to 750W,
drum motor 60W to 3700W, planetary gearbox,and worm gearbox,etc.
Q: How about your quality control?
A: From raw material to finished products, we have strict and complete IPQC.
And the advanced test-ing machine can assure of qualified products delivered.
Q: How to choose a suitable motor?
A: If you have gear motor pictures or drawings to show us,
or you tell us detailed specs like volt-age, speed, torque, motor size, the working model of the motor, needed lifetime and noise level, etc.
please do not hesitate to let us know, then we can suggest a suitable motor per your request.
Q: Can you make the gear motor with customizing specifications?
A: Yes, we can customize per your request for the voltage, speed, torque, and shaft size and shape.
if you need additional wires or cables soldered on the terminal or need to add connectors, or capacitors, or EMC we can make it too.
Q: What's your lead time?
A: Usually our regular standard product will need 10-15days, a bit longer for customized products.
But we are very flexible on the lead time, it will depend on the specific orders.
Q: What is your MOQ?
A: If delivered by sea, the minimum order is 100 pieces, if deliver by express, there is no limit.
Q: Do you have the item in stock?
A: l am sorry we do not have the item in stock, All products are made with orders.
Q: How to contact us?
A: You can send us an inquiry.
