Audited Supplier
AC/DC 9-36V Stainless Steel Water Leak Detection Sensor
Industrial-grade 306 stainless steel sensor for detecting water leaks. Dry contact output suitable for DC/AC 9-36V systems. Ideal for industrial use.
Product Description:
Hangzhou Xinjian Electronic Co., Ltd. presents a cutting-edge Point Type Water Immersion Probe designed to provide reliable water detection in various settings. This innovative probe utilizes the principle of resistance value change in the electrode to amplify, shape, and compare input signals, ensuring accurate water immersion detection. The integrated chip enhances performance, offering high sensitivity, fast response time, and easy installation.
With features like high reliability and anti-interference capabilities, this probe is ideal for critical locations such as communication base stations, power distribution rooms, and cable pipelines. The dry contact signal output indicates the presence of water, enabling timely alarms when needed. Additionally, the probe ensures power, input, and output isolation for enhanced safety and efficiency.
SW5 water sensor function: Outputs an alarm signal when water level exceeds 2mm. Ideal for water leak detection. AC/DC 9-36V Stainless Steel Case. LED indicator. Dry contact relay output.
SW5 water sensor technical parameter:
| rating voltage | AC/ DC 9-36V |
| work current | < 20mA |
| quiescent current | <3 Ma |
| work temperature | -5°C~60°C |
| load capability of relay | (2A @ 250V AC) (2A @ 30V DC) |
| response rate | <50 ms |
| length of wire | 2000mm (or based on requirements) |
| packaging material | epoxy resin |
Connections:
| No. | Color | Definition |
| 1 | Red | Positive pole of DC24V (power in) |
| 2 | Black | Negative pole of DC24V (power in) |
| 3 | Yellow | COM |
| 4 | Green | N.O signal |
| 5 | Blue | N.C signal |
Welcome to Hangzhou Xinjian Electronic Co., Ltd.
Product Description: Water Detection Sensor
If you need to detect small amounts of water (up to 2mm in length), our water detection sensor is the perfect solution. Simply place a sponge block on the floor with the sensor on top. The sponge block will absorb any water, allowing the probe to detect it and trigger an alarm signal.
If you require additional drive current, an external drive circuit can be easily integrated for enhanced performance.
