Audited Supplier
Safety Performance : This Switching Power Supply(SMPS) operates from AC180~264V and converts to DC 12V. Built in fuse providing a voltage regulated single output which can be adjusted with an on board potentiometer. With short circuit, overload, over voltage, protection function to protect your device.
High Efficient : Linear power supplies have efficiencies in the 40%-60% range, while switching power supplies fall in the 85%-90% range.A highly efficient and reliable dual output enclosed power supply, with a high operating temperature of -20~+60°C and cooling by free air convection.
Energy Saving : Uses a switching regulator to convert AC mains power to low voltage DC and it does this much more efficient than a linear power supply.Switching power supplies also tend to be smaller in size than linear power supplies and use less raw material making the cost of power supply more reduced.
Package included:
1 x Power Supply (Power cord is NOT included.)
Please note: The power cord is not included in the package of this product. All of our products are covered by a one-year warranty.
| Output | Model NO. | HY-400FC-24V |
| Output Power | 400W | |
| Output Current | 16.7A | |
| DC Voltage | 24V | |
| Working temperature | -20ºC-,50ºC | |
| Storage temperature | -40ºC.85ºC | |
| Environmental humidity | 10%~95%RH | |
| Size | 191*117*50mm/420g | |
| Input | Voltage Range | 180~240Vac |
| Frequency Range | 50~60HZ | |
| Efficiency | 90% | |
| AC Current | 1.94A@220Vac | |
| Surge Current | 50A G220Vac Cold air dynamics | |
| Leakage Current | <0.75mA@220Vac | |
| Protections | Overload | 110%~150% of rated output power, protection mode; Hiccup mode, can be visually restored after removing abnormal conditions |
| Over voltage | 110%~135% of rated output power, Protection mode; Hiccup mode, Can be visually restored after removing abnormal conditions | |
| Short circuit | Protection mode; Hiccup mode, can be visually restored after removing abnormal conditions,Can be short circuited for a long time | |
| Environment | operation temperature | -20ºC-,50ºC |
| Operating Humidity | 20%~90%RH, No condensation | |
| Storage temperature ,humidity | -40ºC.85ºC,10%~95%RH, No condensation | |
| Seismic Resistance | 100~500Hz,3G 10mins/cycle,60 mins each for the X Y and Z axes |
1. Adopting brand new components
2. Powerful, stable and reliable, with built-in EMI filtering circuit
3 .Equipped with overvoltage, short circuit, and overload protection functions
4 .Double tube forward excitation scheme
5 .Constant power step-down mode output
6 .PCB coated with three proof paint on both sides
7. Strong environmental adaptability
If there have any model meets your requirement, please contact us get more detail
https://huayipower.en.made-in-china.com/product-list-1.html
| Item | Output | Item size | Weight | PC/CTNS | Input AC | ||||
| 5V | 12V | 24V | 30V | 36V | (MM) | (KG) | (PCS) | (V) | |
| HY-400FB | 33.3A | 16.6A | 13.3A | 11.2A | 193*117*50 | 0.47 | 50 | 176~264V | |
| HY-350FB | 70A | 193*117*50 | 0.49 | 50 | 176~264V | ||||
| HY-400FA | 33.3A | 16.6A | 207*118*50 | 0.62 | 40 | 176~264V | |||
| HY-400FAC | 33.3A | 16.7A | 207*118*50 | 0.62 | 40 | 176~264V | |||
| HY-400FA-II | 33.3A | 16.6V | 179*109*51 | 0.54 | 40 | 176~264V | |||
| HY-400GB | 33A | 16.6A | 204*117*50 | 0.47 | 40 | 176~264V | |||
| HY-600FA | 50A | 33.3A | 217*118*50 | 0.85 | 30 | 176~264V | |||
| HY-400FC | 26.6A | 13.5A | 191*117*50 | 0.42 | 50 | 176~264V | |||
| HY-400FEC | 33.3A | 191*117*50 | 0.42 | 50 | 176~264V | ||||
| HY-350FC | 70A | 191*117*50 | 0.42 | 50 | 176~264V | ||||
| HY-400FC-II | 33.3A | 181*117*50 | 0.39 | 60 | 176~264V | ||||
| HY-200FC | 16.7A | 166*94*50 | 0.32 | 60 | 176~264V | ||||
| HY-150FC | 12A | 185*74*42 | 0.29 | 60 | 176~264V | ||||
| HY-120FC | 10A | 145*74*42 | 0.23 | 80 | 176~264V | ||||
| HY-60FC | 5A | 120*74*42 | 0.18 | 80 | 176~264V | ||||
| HY-300TF | 25A | 191*117*50 | 0.42 | 60 | 176~264V | ||||
| HY-300TBS | 25A | 191*117*50 | 0.42 | 60 | 176~264V | ||||
| HY-300TBD | 25A | 166*94*50 | 0.32 | 60 | 176~264V | ||||
Cautions:
1. The actual power is 80% of the rated power of the power supply (example: If the power of your device is 400watts, you need to buy a power supply of 500 watts or more).
2. In order to avoid interference from filtering, the power supply and the equipment need to maintain a distance of more than 3m.
3. Please do not use any equipment overload to avoid damage to the equipment.
4. Need to consider the operating environment temperature of the switching power supply, and the presence of additional auxiliary cooling equipment, in too high a ring temperature switching power supply need to reduce the amount of output. (If the power of your equipment is 400 watts, you need to buy a power supply of 500 watts or more). Indoor outdoor use, the power supply is waterproof Power supply built-in intelligent cooling fan, working with slight sound, this is a normal phenomenon.
ABOUT US
Shenzhen Huayi Power, 200 staff, Shenzhen headquater and Hunan factory, have specialized in LED power supply and dirivers since 2021. Our products cover Rainproof / outdoor / indoor / engineering power supply and drivers, power adapter, electronic components, etc. Adhere to independent innovation, stable quality and low cost, our company has obtained a fast growth. Good product, professional solution and efficient service, are making us to be the trusted partners with cutomers coming from Ameica, Europe, Japan, domestic market, etc. https://huayipower.en.made-in-china.com/company-Shenzhen-Huayi-Power-Technology-Co-Ltd-.html
Our company has a strong and experienced R&D team that can design products according to customer requirements and meet the needs of different customers with the best solutions. We adhere to the business philosophy of ""people-oriented, creating value, quality first, and improving innovation"". Our products are reasonable in price, stable in quality, and have a long lifespan.We warmly welcome new and old friends to cooperate with us ", Led Power Supply made in China!
We use standard shipping cardboard boxes to package your goods and take absolute safety measures. If you have packaging requirements, please let us know!
Q: Do you support sample service?
A: We support free sample services, but we are not responsible for shipping costs
Q: What is your MOQ of switch power supply?
A: Our MOQ is 1000PCS.
Q: Are you a factory or trading company?
A: We are factory
A: 5V, 12V, 24V, 30V, 36V (Depend on items )
Q: How to deal with the faulty?
A: Firstly, our products are produced in strict quality control system and the defective rate will be less. Secondly, during the guarantee period,we will send new product with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
