Audited Supplier
QDX/QX 0.37S-1.1S
10-30m
300-400 L/min
Motor
Single-Stage Pump
Middle Pressure Pump
Single Suction Pump
Vertical Pump
Verticaljoint Surface Pump
Suction Centrifugal
Semi-Open
Pump, Pumps
0.37~2.2kw
2800rpm
220V,380V,
50Hz,60Hz
Submersible Pump, Clarified Water Pump
Clean Water
Carbon/Ceramic/Stainless Steel
Carbon Steel/S.S.
Aluminium or Cast Iron
Aluminium
Alumium
Normal or C&U
ISO9001,CE,CCC
TZMOTAI
Export-Standard Package
household and agriculture
Taizhou, China
8413709190
Product Description
QDX, QX Electric Submersible Pump
Product introduction
QDX, QX series submersible pump consists of pump, mechanical seal and motor. Pump is at the bottom part of pump, which is adopted centrifugal impeller. Motor which is single-phase or three-phase is at the upper part of pump. Seal is used where pump and motor combine, which is a kind of double-end mechanical seal, O rings are applied to all static joints. Float switch can be equipped to control pump's starting and stopping automatically according to the water level.
Main Application
This series pump is small and light, which is widely used in countryside for elevating water from well, irrigation, sprinkling and domestic water supply, and also used in draining off water for fishpond and building site.
Work conditions
The pump can work properly and continuously under following operational conditions :
1. Medium is not corrosive, Sand contents should be max. 0.10% by volume and grannular size should be max. 0.2mm.
2. Medium temperature shouldn't be over 40°C and PH should be 6.5-8.5.
3. The pumps should be operated within rated head.
4. The pumps should be fully submerged into water with depth of less than 3m mad max. the pump should be min. 0.5mm over the water bottom and not be inserted into sludge.
5. Power frequency should be 50HZ, single phase voltage 220V, three-phase voltage 380V, and voltage fluctuation should be 0.9-1.1 times than the rated.
Features of QDX Submersible Pump
1. 100% copper wire
2. Chrome-plated pump rotor (more resistant to wear and corrode)
3. Thermal protector
4. High-end bearing and mechanical seal
Material
Structure of pump | Material | Can be selected |
| Pump body | stainless steel | Stainless steel |
| Impellor | stainless steel | / |
| Pump shaft | 45 # Steel | / |
| Cable | / | Arbitrary length |
Installation size and technical parameters:
Model | Rated flow | Rated lift | Rated power | Voltage | Caliber | Outline installation simensions | Pump outlet and connection simensions | G.W | Dimensions | ||||||||
| m3/h | m | kw | V | mm | L | B | H | H1 | D | d | d1 | d2 | n×d0 | Do | kg | cm | |
| QDX1.5-17-0.37S | 1.5 | 17 | 0.37 | 220 | 25 | 189 | 144 | 338 | 56 | G1 | Φ25 | / | G¾ | / | / | 10.22 | 38*19*20 |
| QX1.5-17-0.37S | 1.5 | 17 | 0.37 | 380 | 25 | 189 | 144 | 338 | 56 | G1 | Φ25 | / | G¾ | / | / | 10.6 | 38*19*20 |
| QDX3-18-0.55S | 3 | 18 | 0.55 | 220 | 25 | 202 | 158 | 364 | 54 | G1 | Φ25 | / | G¾ | / | / | 14 | 39*20*21 |
| QX3-18-0.55S | 3 | 18 | 0.55 | 380 | 25 | 202 | 158 | 364 | 54 | G1 | Φ25 | / | G¾ | / | / | 14 | 39*20*21 |
| QDX3-25-0.75S | 3 | 25 | 0.75 | 220 | 25 | 237 | 188 | 387 | 48 | G1 | Φ25 | / | G¾ | / | / | 14.5 | 41*20*21 |
| QX3-25-0.75S | 3 | 25 | 0.75 | 380 | 25 | 237 | 188 | 387 | 48 | G1 | Φ25 | / | G¾ | / | / | 15 | 41*20*21 |
| QDX10-12-0.55S | 10 | 12 | 0.55 | 220 | 25 | 235 | 188 | 366 | 56 | / | Φ51 | G1¼ | G1½ | 2×Φ10 | Φ90 | 16.5 | 43*23*24 |
| QX10-12-0.55S | 10 | 12 | 0.55 | 380 | 50 | 235 | 158 | 366 | 56 | / | Φ51 | G1¼ | G1½ | 2×Φ10 | Φ90 | 16.24 | 43*23*24 |
| QDX10-16-0.75S | 10 | 16 | 0.75 | 220 | 50 | 235 | 158 | 366 | 56 | / | Φ51 | G1¼ | G1½ | 2×Φ10 | Φ90 | 16.6 | 44*20*26 |
| QX10-16-0.75S | 10 | 16 | 0.75 | 380 | 50 | 235 | 158 | 366 | 56 | / | Φ51 | G1¼ | G1½ | 2×Φ10 | Φ90 | 15.9 | 44*20*26 |
| QDX30-7-1.1S | 30 | 7 | 1.1 | 220 | 80 | 260 | 158 | 439 | 69 | / | Φ75 | G2¼ | G2½ | 2×Φ10 | Φ110 | 20 | 49*22*28 |
| QX30-7-1.1S | 30 | 7 | 1.1 | 380 | 80 | 260 | 158 | 439 | 69 | / | Φ75 | G2¼ | G2½ | 2×Φ10 | Φ110 | 19.32 | 49*22*28 |
Packing & Shipping :
To avoid damp, inner layer wrapped with plastic paper
To lessen vibration, middle layer filled with foam
To avoild squeeze, motor are packed with plywood or wooden case
Customized package is also accept
PAINTING COLOR CODE
ADVANTAGE:
Pre-sales service:
•We are a sales team, with all technical support from engineer team.
•We value every inquiry sent to us, ensure quick competitive offer within 24 hours.
•We cooperate with customer to design and develop the new products. Provide all necessary document.
After-sales service:
•We respect your feed back after receive the motors.
•We provide 1years warranty after receipt of motors..
•We promise all spare parts available in lifetime use.
•We loge your complain within 24 hours.
FAQ:
