Audited Supplier
As the name suggests, the pin type insulator is mounted on a pin on the cross-arm on the pole. There is a groove on the upper end of the insulator. The conductor passes through this groove and is tied to the insulator with annealed wire of the same material as the conductor. Pin type insulators are used for transmission and distribution of electric power at voltages up to 33 kV. Beyond operating voltage of 33 kV, the pin type insulators become too bulky and hence uneconomical.ANSI 56-3 ceramic porcelain pin type insulators
§ High Quality insulator-Annual production of various types of insulators 3 million pieces.
§ Factory was established in 1998, continuous technical development and improvement, technology and process strength.
§ 25 years of State Grid, China Southern Power Grid quality supplier.
§ 25 years of experience in insulator export production
ANSI 56-3 ceramic porcelain pin type insulators
STANDARD PARTICULAR
| ANSI Class | 56-1 | 56-2 | 56-3 | 56-4 | 56-5 | |
| Neck Type | J | K | K | / | / | |
| Leakage Distance-mm | 330 | 432 | 533 | 685 | 864 | |
| Dry Arcing Distance-mm | 178 | 210 | 241 | 285.8 | 355.6 | |
| Minimum Pin Length-mm | 152 | 178 | 203 | 254 | 305 | |
| Main Dimensions-mm | D-Diameter | 191 | 229 | 267 | 305 | 343 |
| H-Height | 146 | 165 | 191 | 241 | 318 | |
| N-Neck Diameter | 89 | 102 | 102 | 114 | 140 | |
| E-Pin Diameter | 35 | 35 | 35 | 35 | 35 | |
| S-Saddle Groove Radius | 19 | 19 | 19 | 19 | 19 | |
| Wire Grooves Radius | 14 | 14 | 14 | 14 | 14 | |
| Cantilever Strength-kN | 11 | 13 | 13 | 13 | 13 | |
| Low-Frequency Flashover Voltage | Dry-kV | 95 | 110 | 125 | 140 | 175 |
| Wet-kV | 60 | 70 | 80 | 95 | 125 | |
| Critical Impulse Flashover Voltage | Positive-kV | 150 | 175 | 200 | 225 | 270 |
| Neagtive-kV | 190 | 225 | 265 | 310 | 340 | |
| Radio Influence Voltage | Test Voltage to Ground-kV | 15 | 22 | 30 | 30 | 44 |
| Max. RIV at 1000 KHz-uV | 100 | 100 | 200 | 200 | 200 | |
| Power Frequency Puncture Voltage, kV | 130 | 145 | 165 | 185 | 225 | |
ANSI 56-3 ceramic porcelain pin type insulators
Normal Packing: Carton Box or custermized.
Jiangxi Xinghai Electric Porcelain Manufacturing Co., Ltd. is one of leading manufacturer of porcelain insulators for overhead distribution and transmission line. Which located in Pingxiang Jiangxi China, whereis china's centennial procelain city, with 80,000m manufacturing area and 230 people (include 10 senior engineers and 28 technicians).
Xinghai insulator own strong technical strength and full set facilities for various high and low voltage porcelain insulator. the main products covering 300kN and below suspension/disc
insulator, Anti-pollution type insulator, pin insulator, line post insulator, strain insulator, spool insulator, shackle insulator and other more than 100 kinds of insulator. covering products with voltage levels ranging from 10kV-500kV. Currently, the company is developing advanced DC±800kV and AC1000kV UHV suspension insulators in China, and is a qualified supplier of State Grid and China Southern Power Grid. It enjoys a wide reputation in the industry.
All products are manufactured by wet process porcelain and advanced oxide flame burning to ensure reliable performance.
Xinghai insulator has ISO9001:2015 Certified Quality Management System to ensure consistent quality excellence. All products Confirm to international quality standards - IEC, BS, ANSI, AS, DIN and GB. With high quality, competitive prices and excellent professional service, we gain very good reputation in the world.
Q 1. What's the payment term ?
A. We accept TT,30% deposit and 70% balance against copy of B/L 0r L/C at sight.
Q 2. How long is producing time ?
A. Normally it will take about 35-40 days for production.
Q 3. What is the standard of package ?
A. For small capacity, we use carton, but for big capacity, we will use strong wooden case for protection or double inner packs in a master carton .
Q 4. Can you offer Form A or C/O ?
A. Yes. We can prepare relative documents to forgin affairs office or other offices to apply for this certificate.
Q 5. Will you accept using customer's logo ?
A. Only accaept OEM when you order a big quantity.
Q 6.What is your monthly output?
A. It depends on the product model, normally our monthly output is 2000 tons.
Q 7. How do you make sure your good quality ?
A. We use the best raw material , and every single product will go through a series of strict test.
Q 8. What kind of certificate you have ?
A. Our company got ISO 9001, ISO 14001, ISO 45001 certificates, and each series of product got a test report.
Q 9. What else can you do for me?
A. Our customer service staff will be always online and reply your inquiry within 24 hours.
