Audited Supplier
API 610 VS4
>150m
>400 L/min
Motor
Single or Multistage
Middle Pressure Pump
Single Suction Pump
Vertical Pump
Closed
DN40~400
~400m3/H
~200m
-20~300 Degrees Celsius
~5MPa
Dalian Kehuan Pump Co., Ltd
Wooden Case
API 610 standard
Dalian, Liaoning, China
8413709990
Product Description
API 610 Vs4 Centrifugal Pumps
Application
KY model pumps are of vertical,single stage and single suction, long shaft submerged pumps, available for all kinds of sewage conveying from power plants,chemical factories and wastewater traetment plants.
It is mainly used in
Structural - Thermal power factory
- chemical factory
- wastewater treatment factory
- steels factor,steels rolling mill
- paper mill
- cement factory
- Capacity Q 2-400m3/h
- Head H 5-100m
- Working temperature T -20~ +200°C
- Safe and reliable connecting shaft structure.
- Adopt multi-points support for the rotor component and pumps runs safely and reliably.
- Adopt external or self-lubrication for sliding bearing.
- The impeller has submerged into medium when the pump begins to run,so start up become easy without air evacuation.
- Adopt two-runner casings(the diameter is graeter than 80mm).It is small of radial force of rotors component, of shafts deflection and of wear and tear from sliding bearings,so long service life.
- The pump runs clockwise looking from the motor end.
Carbonsteel; chromed steel; austeniticstainlesssteel; duplexsteel; Titanium and Titanium Alloys; Hastelloy C-276 and other special materials; It depends the customer's request.
| S-5 | S-6 | C-6 | S-8 | A-7 | A-8 | D-1 | D-2 | |
| Casing | Cast steel | Cast steel | CA15/CA6NM | Cast steel | AUST SS | 316 AUS | DUPLEX | SUPER DUPLEX |
| Impeller | Cast steel | 12%CR | CA15/CA6NM | 316 AUS | AUST SS | 316 AUS | DUPLEX | SUPER DUPLEX |
| Shaft | AISI4140 | AISI4140 | SS420 | 316N | AUST SS | 316N | 2205 | 2507 |
| Wear rings | 12%CR | 12%CR | 12%CR | 316 Hard faced | AUST SSHard faced | 316 Hard faced | Duplex Hard faced | SUPER Duplex Hard faced |
| Bearing Frame | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel |
Company profileDalian Kehuan Pump Co.,Ltd was established in 2002 ,Registered capital:50 million RMB. The factory covers an area of 20,000 square meters. and the workshop area is more than 10,000 square meters.
There are 150 employees, and many of the main management and technical personnel are from well-known pump companies. Sales in the last three years have remained within the range of 100 to 120 million.
Kehuan Pumps specializes in the research and development, design, manufacturing and continuous improvement of high level magnetic pumps. The original intention of the general manager is to believe that technology and environmental protection are the major trends and future themes. We advocate: Enjoy technology and protect the environment. This is also the origin of the company name.
We have professional casting workshops and several outsourcing machining sub-contractors. All the casting parts are casted with plastic mould and metal die; impellers are casted by investment casting means,in order to guarantee excellent performance of products. Numerical control machine and all kinds of machining equipment with high precision as well as advanced machining process and excellent management mode can ensure manufacturing of pumps with perfect Performance.
First Class Inspection Ability
We have more than 30 inspection devices such as pump test station with national Level I qualification certificates, advanced balancing machine, metal analyzer, vibration meter, noise meter,roughness meter, hardness meter, paint thickness tester, mechanical seal rotation test and air tightness test devices as well as more than 500 various measurement instruments such as difference gauge, plug gauge, ring gauge, micrometer, tilt meter with high precision to ensure reliable and efficient pumps.
Technical Ability
Dalian Kehuan Pumps co.,Ltd. has its own technical development team including specialists,engineers and technicians who have a deep research on various pumps.
We can provide all kinds of services related to pumps quickly such as pump R&D,reconstruction and. to surveying and drawing.
*We design pumps and mechanical seal with the help of computer aided design software such as CAD and SolidWorks.
*All of our products meet the following international standards such as API 610, D1N, ANSI, ISO.
*We can design and optimize the pumps with our advanced technology in combination with customer's specific requirements.
*If you have any questions about our products, I hope you can contact me at your convenience.
Thank you for your concern.
