ART-SDS-SPRAYED CONCRETE STEEL FIBER 45/35
Bridge Decks
High Corrosion Resistance
0.74mm
Deformed
35 mm
Cold Drawn Steel Wire
1100MPa
Loose
Hooked End
45 Degrees
8100
ARIT
Bag
ART-SDS-SPRAYED CONCRETE STEEL FIBER 45/35
Tengzhou
372596088
Product Description

ART-SDS-SPRAYED CONCRETE STEEL FIBER 45/35
0.74mm Diameter 35mm Length High Performance Steel Fiber
Description
ART-SDS-SPRAYED CONCRETE STEEL FIBER 45/35 is made of low-carbon, hooked-end, cold drawn wire for reinforced concrete. ART-SDS-SPRAYED CONCRETE STEEL FIBER 45/35 steel fibers distribute stresses within the concrete and provide improvement to ductility
Main Characteristics
Higher anti-cracking ability of preventing crack propagation
Good anti-seepage and humidity resistance performance
Higher tensile strength, rupture strength and good impact resistance
Good wear resistance, fatigue resistance, durability and corrosion resistance
Higher bending resistance and toughness
High strength, big stiffness and great shear resistance ability
Instructions for Use
Fiber reinforced concrete can be finished by most finishing techniques. ART-SDS-SPRAYED CONCRETE STEEL FIBER 45/35 does not affect the finishing characteristics of concrete.
ART-SDS-SPRAYED CONCRETE STEEL FIBER 45/35 can be used in power/hand troweled concrete, colored and broom finished concrete.
ART-SDS-SPRAYED CONCRETE STEEL FIBER 45/35 can be pumped and placed using conventional equipment.
Hand screeds can be used, but vibratory and laser screeds are recommended to provide added compaction and bury surface fibers.

Items | Performance |
Material | Cold drawn steel wire |
Diameter | 0.74±0.04mm |
Length | 35±2mm |
L/D(length/diameter) | 45 |
Tensile strength | 1100Mpa(N/mm2) |
Shape | Loose |
Type | Hooked end |
Camber of the fiber | ≤5% of the L |
Bending angle | 45° |
Number of fiber | 8100±100 |
Melting Point | 2760ºF(1516ºC) |
Packaging | 20kg/bag |
Packaging
20kg/bag,1.2tons/pallet, 24tons/20GP.

Products should be stored in dry warehouse.
Protect products from the rain.
















