Audited Supplier
A312 TP316L 2" SCH10S
Stainless Steel Pipes
ASTM, AISI, GB, EN, GOST9941-81
300 Series
ISO
Round
Cold-Drawing
Pickling
TP316/316L
6~630mm
0.89~40mm
Random Length or Fixed length
Hydraulic Test /Eddy Current Test/Ultrasonic Test
Stock 7 Days; MTO 30 Days
EXW, FOB, CFR, CIF etc.
ASTM A312 TP316/316L 2" SCH40S Heat No.:
ASTM A312
GH-STEEL
Packed in Bundles or Plywooden Box
6~630mm
China
7304419000
Product Description
| Product Name | Stainless Steel Seamless Pipes /Tubes Гост9941-81 Труба Сталь конструкционная криогенная Tubería de acero inoxidable sin costura Tubos de Aço Inoxidável sem Costura | |
| Company Inform | 1.Name:WENZHOU GUOHAO STEEL., LTD 2.Type: Manufacturer | |
| Material | Austenitic: TP304, TP304L, TP304H, TP309S, TP310S, TP316L, TP316Ti, TP317L, TP321, TP321H, TP347H , 904L, 254SMO GOST Grade: 08х18н10т,12х18н10т(AISI 321), 10х17н13м2т(AISI 316Ti), , 20х23н18(AISI 310S), 06хн28мдт(AISI 904L), 08х18н10(AISI304) | |
| Duplex Stainless: UNS S31803,UNS S2205,UNS S32750, UNS S32760 | ||
| Nickel Alloy: Incoloy: 800/800H/800HT 825 926 20 28 201 200 Inconel :718 600 601 625 Hastelloy: C-22 C-276 B-2 B-3 High Temperature Alloy:GH3030 GH3039 Cr20Ni80 ; Monel400,K-500 | ||
| Standard | ASTM A312,ASTM A213,ASTM A269,ASTM A511,ASTM A789,ASTM A790 ASTM B161 B163 B165 B167 B407 B423 B444 B622 B677 B729 B983 EN 10216-5,DIN 17456 GB/T 14976,GB13296,GB/T 21833,GB/T 15011,GB/T 15062 GOST 9940,GOST 9941 | |
Specification | D(Outer Diameter) | 6mm-630mm 1/8inch-24inch |
| T(Wall Thickness) | 0.89mm-40mm SCH 5, SCH 10, SCH 40, SCH 80, SCH 160, SCH XXS 10 BWG, 12 BWG, 14 BWG , 16 BWG, 18 BWG, 20 BWG | |
| L(Length) | Random length 5~7m Fixed length 6m /6.096m /6.1m/12m or as customer's actual request | |
| Surface | Annealing&Pickling, Polishing (180#,240#,320#,400#,600#) Bright Annealing Sand Blasting Shot Blasting | |
| Pipe End | Plain End (PE); Bevelled End (BE); Threaded End (TE) | |
| Markings | GH-STEEL S.S SMLS PIPE ASTM A312 TP316Ti 2" SCH40S 6MTR HEAT NO.*********** Markings will adhere to prescribed specifications in A999/A999M and shall include the NPS or OD and schedule number or average wall thickness, heat number, and NH (when hydrotesting is not performed) and ET (when eddy-current testing is performed) or UT (when ultrasonic testing is performed). The marking shall also include the manufacturer's private identifying mark, the marking requirement of section 12.3 on Hydrostatic or Nondestructive Electric Test, if applicable, and whether seamless (SML), welded (WLD), or heavily cold-worked (HCW). For Grades TP304H, TP316H, TP321H & TP347H, the marking shall also include the heat number and heat-treatment lot identification. | |
| Flattening Test | For material heat treated in a continuous furnace flattening tests shall be made on a sufficient number of pipes to constitute 5% of the lot, but in no case less than 2 lengths of pipe. | |
| Hydraulic Test or Nondestructive Test | Each pipe shall be subjected to the Nondestructive Test or the hydraulic test | |
| Value Added Services | Customize Length, Bending, Polishing, Shot Blasting, Drilling/Punching, Oil Degreasing | |
| Delivery Time | 1.for ready stock :7 days after receiving the deposit of T/T 2.For MTO: 35 days after receiving the deposit of T/T | |
| Trade Terms | EXW,FOB, CFR, CIF etc. | |
| Loading Port | Ningbo/Wenzhou/Shanghai | |
| Remittance method | TT/LC/CASH/DP | |
| Container | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM | |
| Referenced Documents | ASTM Referenced Standards A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels A370 Test Methods and Definitions for Mechanical Testing of Steel Products A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys A999/A999M Specification for General Requirements for Alloy and Stainless-Steel Pipes A1016/A1016M Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless-Steel Tubes E112 Test Methods for Determining Average Grain Size E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) | |
STAINLESS STEEL SMLS PIPE 2" SCH40S 6MTR 60.3×2.77x6000mm
We are a professional manufacturer and exporter of ASTM A312 TP316L stainless steel pipe in China.
10X17H13M2T: increased resistance to aggressive environments with high acidity, which is not lost even when the material is thermally exposed (up to 600 degrees Celsius). This steel grade is used most of all in the chemical, food and medical industries. Pipes from this steel are enoughPrecisely easy to weld, thus obtaining a monolithic product with an extremely long service life.
TP316 TP316L TP316H TP316T 1.4401 1.4404 1.4436 1.4571 Stainless Steel Seamless Tube Pipe Chemical Composition in %
| Grade | UNS | Carbon (C) Max. | Manganese (Mn) Max. | Phosphorous (P) Max. | Sulphur (S) Max. | Silicon (Si) Max. | Chromium (Cr) | Nickel (Ni) | Molybdenum (Mo) | Nitrogen (N) Max. | Iron (Fe) | Other Elements |
| TP316 | S31600 | 0.08 | 2.0 | 0.045 | 0.030 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | Remainder | - |
| TP316L | S31603 | 0.035 | 2.0 | 0.045 | 0.030 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | Remainder | - |
| TP316H | S31609 | 0.04-0.10 | 2.00 | 0.045 | 0.030 | 1.00 | 16.0-18.0 | 10.0-14.0/ 11.0-15.0 | 2.0-3.0 | - | Remainder | - |
| TP316Ti | S31635 | 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 0.10 | Remainder | Ti :5x(C+N)-0.70 |
| 1.4401 | - | 0.07 | 2.0 | 0.040 | 0.015 | 1.00 | 16.5-18.5 | 10.0-13.0 | 2.0-2.5 | 0.11 | Remainder | - |
| 1.4404 | - | 0.03 | 2.0 | 0.040 | 0.015 | 1.00 | 16.5-18.5 | 10.0-13.0 | 2.0-2.5 | 0.11 | Remainder | - |
| 1.4436 | - | 0.05 | 2.0 | 0.040 | 0.015 | 1.00 | 16.5-18.5 | 10.5-13.0 | 2.0-2.5 | 0.11 | Remainder | - |
| 1.4571 | - | 0.08 | 2.0 | 0.040 | 0.015 | 1.00 | 16.5-18.5 | 10.5-13.0 | 2.0-2.5 | 0.11 | Remainder | Ti :5x(C+N)-0.70 |
| Grade | UNS Designation | Tensile strength Mpa(min) | Yield strengthMpa (min) | Elongation .(%) em 2" (min.) |
| TP316 | S31600 | 515 | 205 | 35 |
| TP 316L | S31603 | 485 | 170 | 35 |
| TP316H | S31609 | 515 | 205 | 35 |
| TP316Ti | S31635 | 515 | 205 | 35 |
| 1.4401 | - | 510-710 | 240 | 30 |
| 1.4404 | - | 490-690 | 225 | 30 |
| 1.4436 | - | 510-710 | 225 | 30 |
| 1.4571 | - | 490-690 | 225 | 30 |
Others Stainless/Duplex Stainless Chemical Composition & Mechanical Performance
| Chemical Composition (%) | Mechanical Performance | ||||||||||||||
| Grade | C | Mn | P | S | Si | Cr | Ni | Mo | N | Ti | Others | Mpa (kgf/mm²) | Elongation .(%) em 2" (min.) | Hardness | |
| (AISI) | (max.) | (max.) | (max) | (max.) | (max.) | (min.) | (min.) | (min.) | (min.) | (min.) | HRB | ||||
| (max.) | (max.) | (max.) | (max.) | (max.) | Tensile strength (min.) | Yield strength (min.) | (max.) | ||||||||
| 304 | 0,080 | 2,0 | 0,045 | 0,030 | 1,00 | 18,0 | 8,0 | 515 | 205 | 35 | 90 | ||||
| 20,0 | 11,0 | ||||||||||||||
| 304L | 0,035 | 2,00 | 0,045 | 0,030 | 1,00 | 18,0 | 8,0 | 485 | 170 | 35 | 90 | ||||
| 20,0 | 13,0 | ||||||||||||||
| 304H | 0,040 | 2,00 | 0,045 | 0,030 | 1,00 | 18,0 | 8,0 | 515 | 205 | 35 | 90 | ||||
| 0,100 | 20,0 | 11,0 | |||||||||||||
| 309S | 0,080 | 2,00 | 0,045 | 0,030 | 1,00 | 22,0 | 12,0 | 0,75 | 515 | 205 | 35 | 90 | |||
| 24,0 | 15,0 | ||||||||||||||
| 310 | 0,150 | 2,00 | 0,045 | 0,030 | 1,00 | 24,0 | 19,0 | 515 | 205 | 35 | 90 | ||||
| 26,0 | 22,0 | ||||||||||||||
| 310S | 0,080 | 2,00 | 0,045 | 0,030 | 1,00 | 24,0 | 19,0 | 0,75 | 515 | 205 | 35 | 90 | |||
| 26,0 | 22,0 | ||||||||||||||
| 310H | 0,040 | 2,00 | 0,045 | 0,030 | 1,00 | 24,0 | 19,0 | 515 | 205 | 35 | 90 | ||||
| 0,100 | 26,0 | 22,0 | |||||||||||||
| 314 | 0,200 | 2,00 | 0,045 | 0,015 | 1,50 | 24,0 | 19,0 | 0,11 | 515 | 205 | 35 | 90 | |||
| 2,50 | 26,0 | 22,0 | |||||||||||||
| 316 | 0,080 | 2,00 | 0,045 | 0,030 | 1,00 | 16,0 | 11,0 | 2,00 | 515 | 205 | 35 | 90 | |||
| 18,0 | 14,0 | 3,00 | |||||||||||||
| 316H | 0,040 | 2,00 | 0,045 | 0,030 | 1,00 | 16,0 | 11,0 | 2,00 | 515 | 205 | 35 | 90 | |||
| 0,100 | 18,0 | 14,0 | 3,00 | ||||||||||||
| 316L | 0,035 | 2,00 | 0,045 | 0,030 | 1,00 | 16,0 | 10,0 | 2,00 | 485 | 170 | 35 | 90 | |||
| 18,0 | 14,0 | 3,00 | |||||||||||||
| 316Ti | 0,080 | 2,00 | 0,045 | 0,030 | 0,75 | 16,0 | 10,0 | 2,00 | 0,10 max | 5x(C+N)-0,70 | 515 | 205 | 35 | 90 | |
| 18,0 | 14,0 | 3,00 | |||||||||||||
| 317L | 0,035 | 2,00 | 0,045 | 0,030 | 1,00 | 18,0 | 11,0 | 3,00 | 515 | 205 | 35 | 90 | |||
| 20,0 | 15,0 | 4,00 | |||||||||||||
| 321 | 0,080 | 2,00 | 0,045 | 0,030 | 1,00 | 17,0 | 9,0 | 0,10 max | 5x(C+N)-0,70 | 515 | 205 | 35 | 90 | ||
| 19,0 | 12,0 | ||||||||||||||
| 321H | 0,040 | 2,00 | 0,045 | 0,030 | 1,00 | 17,0 | 9,0 | 0,10 max | 4x(C+N)-0,70 | 515 | 205 | 30 | 90 | ||
| 0,100 | 19,0 | 12,0 | |||||||||||||
| 347 | 0,080 | 2,00 | 0,045 | 0,030 | 1,00 | 17,0 | 9,0 | Nb:10xC-1,00 | 515 | 205 | 35 | 90 | |||
| 19,0 | 13,0 | ||||||||||||||
| 347H | 0,040 | 2,00 | 0,045 | 0,030 | 1,00 | 17,0 | 9,0 | Nb:8xC-1,00 | 515 | 205 | 35 | 90 | |||
| 0,100 | 19,0 | 13,0 | |||||||||||||
| S31254 254SMO | 0,020 | 1,00 | 0,030 | 0,030 | 0,08 | 19,50 | 17,50 | 6,00 | 0,18 | Cu:0,50-1,00 | t≤5mm 675 | t≤5mm 315 | 35 | 90 | |
| 20,50 | 18,50 | 6,50 | 0,25 | t>5mm 655 | t>5mm 310 | ||||||||||
| 904L | 0,020 | 2,00 | 0,040 | 0,030 | 1,00 | 19,00 | 23,00 | 4,00 | 0,10 max | Cu:1,00-2,00 | 490 | 215 | 90 | ||
| UNS 8904 | 23,00 | 28,00 | 5,00 | ||||||||||||
| UNS31803 | 0,030 | 2,00 | 0,030 | 0,020 | 1,00 | 21,00 | 4,50 | 2,50 | 0,080 | 620 | 450 | 25 | HRC 30 | ||
| 23,00 | 6,50 | 3,50 | 0,20 | ||||||||||||
| UNS32205 | 0,030 | 2,00 | 0,030 | 0,020 | 1,00 | 22,00 | 4,50 | 3,00 | 0,14 | 655 | 485 | 25 | HRC 30 | ||
| 23,00 | 6,50 | 3,50 | 0,20 | ||||||||||||
| SUPER DUPLEX UNS32750 | 0,030 | 1,20 | 0,035 | 0,020 | 0,80 | 24,00 | 6,00 | 3,00 | 0,24 | Cu: 0,50 max | 800 | 550 | 15 | HRC 34 | |
| 26,00 | 8,00 | 5,00 | 0,32 | ||||||||||||
| SUPER DUPLEX UNS32760 | 0,030 | 1,00 | 0,030 | 0,010 | 1,000 | 24,00 | 6,00 | 3,00 | 0,20 | Cu:0,50-1,00 | 750 | 550 | 25 | HRC 32 | |
| 26,00 | 8,00 | 4,00 | 0,30 | W:0,50-1,00 | |||||||||||
| Grade | Material number | C (max) | Si (max) | Mn (max) | P (max) | S (max) | N (max) | Cr | Mo | Ni | Ti | Nb |
| X5CrNi18-10 | 1.4301 | 0.070 | 1.00 | 2.00 | 0.045 | 0.015 | 0.11 | 17.00-19.50 | 8.00-10.50 | |||
| X2CrNi19-11 | 1.4306 | 0.030 | 1.00 | 2.00 | 0.045 | 0.015 | 0.11 | 18.00-20.00 | 10.00-12.00 | |||
| X2CrNiN18-10 | 1.4311 | 0.030 | 1.00 | 2.00 | 0.045 | 0.015 | 0.12-0.22 | 17.00-19.50 | 8.50-11.50 | |||
| X6CrNiTi18-10 | 1.4541 | 0.080 | 1.00 | 2.00 | 0.045 | 0.015 | 17.00-19.00 | 9.00-12.00 | 5×C-0.70 | |||
| X6CrNiNb18-10 | 1.4550 | 0.080 | 1.00 | 2.00 | 0.045 | 0.015 | 17.00-19.00 | 9.00-12.00 | 10×C-1.00 | |||
| X5CrNiMo17-12-2 | 1.4401 | 0.070 | 1.00 | 2.00 | 0.045 | 0.015 | 0.11 | 16.50-18.50 | 2.00-2.50 | 10.00-13.00 | ||
| X2CrNiMo17-12-2 | 1.4404 | 0.030 | 1.00 | 2.00 | 0.045 | 0.015 | 0.11 | 16.50-18.50 | 2.00-2.50 | 10.00-13.00 | ||
| X6CrNiMoTi17-12-2 | 1.4571 | 0.080 | 1.00 | 2.00 | 0.045 | 0.015 | 16.50-18.50 | 2.00-2.50 | 10.50-13.50 | 5×C-0.70 | ||
| X2CrNiMoN17-13-3 | 1.4429 | 0.030 | 1.00 | 2.00 | 0.045 | 0.015 | 0.12-0.22 | 16.50-18.50 | 2.50-3.00 | 11.00-14.00 | ||
| X2CrNiMo18-14-3 | 1.4435 | 0.030 | 1.00 | 2.00 | 0.045 | 0.015 | 0.11 | 17.00-19.00 | 2.50-3.00 | 12.50-15.00 | ||
| X3CrNiMo17-13-3 | 1.4436 | 0.050 | 1.00 | 2.00 | 0.045 | 0.015 | 0.11 | 16.50-18.50 | 2.50-3.00 | 10.50-13.00 | ||
| X2CrNiMoN17-13-5 | 1.4439 | 0.030 | 1.00 | 2.00 | 0.045 | 0.015 | 0.12-0.22 | 16.50-18.50 | 4.00-5.00 | 12.50-14.50 |
| Outside Diameter | BWG | ||||||||
| 25 | 22 | 20 | 18 | 16 | 14 | 12 | 10 | ||
| Wall Thickness mm | |||||||||
| 0.508 | 0.71 | 0.89 | 1.24 | 1.65 | 2.11 | 2.77 | 3.40 | ||
| mm | inch | Weight kg/m | |||||||
| 6.35 | 1/4 | 0.081 | 0.109 | 0.133 | 0.174 | 0.212 | |||
| 9.53 | 3/8 | 0.126 | 0.157 | 0.193 | 0.257 | 0.356 | 0.429 | ||
| 12.7 | 1/2 | 0.214 | 0.263 | 0.356 | 0.457 | 0.612 | 0.754 | ||
| 15.88 | 5/8 | 0.271 | 0.334 | 0.455 | 0.588 | 0.796 | 0.995 | ||
| 19.05 | 3/4 | 0.327 | 0.405 | 0.553 | 0.729 | 0.895 | 1.236 | ||
| 25.4 | 1 | 0.44 | 0.546 | 0.75 | 0.981 | 1.234 | 1.574 | 2.05 | |
| 31.75 | 1 1/4 | 0.554 | 0.688 | 0.947 | 1.244 | 1.574 | 2.014 | 2.641 | |
| 38.1 | 1 1/2 | 0.667 | 0.832 | 1.144 | 1.514 | 1.904 | 2.454 | 3.233 | |
| 44.5 | 1 3/4 | 1.342 | 1.774 | 2.244 | 2.894 | 3.5 | |||
| 50.8 | 2 | 1.549 | 2.034 | 2.574 | 3.334 | 4.03 | |||
| 63.5 | 2 1/2 | 1.949 | 2.554 | 3.244 | 4.214 | 5.13 | |||
| 76.2 | 3 | 2.345 | 3.084 | 3.914 | 5.094 | 6.19 | |||
| 88.9 | 3 1/2 | 2.729 | 3.609 | 4.584 | 5.974 | 7.27 | |||
| 101.6 | 4 | 4.134 | 5.254 | 6.854 | 8.35 | ||||
| 114.3 | 4 1/2 | 4.654 | 5.924 | 7.734 | 9.43 | ||||
| Stainless Steel Tube: A/SA213, A/SA269, A/SA789, EN10216-5, GOST9941-81. | |||||||||
| Summary | Standards |
| Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | ASTM A213 |
| Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service | ASTM A269 |
| Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | ASTM A312 |
| Standard Specification For Seamless Stainless Steel Mechanical Tubing | ASTM A511 |
| Standard Specification For Seamless Stainless Steel Tube for Pressure purposes | EN 10216-5 |
| Standard Specification For Seamless Stainless Steel Tubes,cold and hot finished | GOST9941-81 |
| Standard | Outside Diameter Tolerance(mm) | Thickness Tolerance(mm) | Length Tolerance (mm) | |||
| ASTM A269 | D<12.7 | ±0.13 | ±15% | +3.2 / -0 | ||
| (12.7~38.1] | ±0.13 | ±10% | ||||
| [38.1~88.9) | ±0.25 | +4.8 / -0 | ||||
| [88.9~139.7) | ±0.38 | |||||
| [139.7~203.2) | ±0.76 | |||||
| ASTM A213 | D<25.4 | ±0.1 | D≤38.1 | +20%/ -0% | D≤50.80 | +3 / -0 |
| [25.4~38.1] | ±0.15 | |||||
| (38.1~50.8) | ±0.2 | D>38.1 | +22%/ -0% | D>50.8 | +5 / -0 | |
| [50.8~63.5) | ±0.25 | |||||
| [63.5~76.2) | ±0.30 | |||||
| [76.2~101.6] | ±0.38 | |||||
| (101.6~190.5] | +0.38 / -0.64 | |||||
| (190.5~228.6] | +0.38 / -1.14 | |||||
| ASTM A312 | [10.29~48.26] | +0.4 / -0.8 | 10.3~73 | +20% / -12.5% | +6 / -0 | |
| 88.9~457 T/D≤5% | +22.5% / -12.5% | |||||
| (48.26~114.30] | ±0.80 | 88.9~457 T/D>5% | +15% / -12.5% | |||
| (114.30~219.08] | +1.6 / -0.8 | 508above T/D<5% | +22.5% /-12.5% | |||
| (219.08~457.20] | +2.4 / -0.8 | 508above T/D>5% | +15%/-12.5% | |||
| ASTM A789 | D<12.7 | ±0.13 | ±15% | +3 / -0 | ||
| [12.7 to 38.1) | ±0.13 | ±10% | ||||
| [38.1 to 88.9) | ±0.25 | +5 / -0 | ||||
| [88.9 to 139.7) | ±0.38 | |||||
| [139.7 to 203.2) | ±0.76 | |||||
| ГОСТ 9941-81 | [5~10] | Normal:±0.30 High:±0.20 Higher:±0.15 | T:0.2 | Normal:±0.05; High:±0.03 | / | |
| T:0.3~0.4 | Normal:±0.07; High:±0.05 | |||||
| T:0.5~1.0 | Normal:±0.15; High:±0.10 | |||||
| [11~30] | Normal:±0.40 High:±0.30 Higher:±0.20 | T:1.2~3.0 | Normal:+12.5% / -15%; High:±12.5%; Higher:+12.5% / -10% | |||
| T:3.5~7.0 | Normal:±12.5%; High:+12.5% / -10%; Higher:±10% | |||||
| [32~95] | Normal:±1.2% High:±1% Higher:±0.8% | T:7.5~8.5 | Normal:+12.5% / -10%; Higher:±10% | |||
| EN10216-5 | D3 | ±0.75% / ±0.30mm | T3 | ±10%/ ±0.20mm | L≤6m | +5 +0 |
| D4 | ±0.5% / ±0.10mm | T4 | ±7.5% / ±0.15mm | ≥6~12M | +10-0 | |
- All of our stainless steel seamless pipe & tubes are packaged as per international standard to prevent any possible damage or loss. By default, we will use thick woven plastic bag to bundle the finished pipes together in batches.
- For some special pipes & tubes that are vulnerable to dirt, scratches, stress or rough handling, we will suggest wooden case for protection. Kindly note, wooden case can incur extra cost, not only its own cost, but also the increased freight cost, which is especially true for air transportation.
- For enhanced customer experience, we also provide dedicated package as per your special requirements.
The inspection of our company and products is open to customers themselves or their designated third-party inspectors, such as SGS, BV, TUV, DNV, etc., who are well-known in the industry.
Wenzhou Guohao Steel was established in 2008. We are ISO 9001:2015 approved manufacturer, having a state-of-the-art infrastructure facility for having smooth production process. It has successfully grown by focusing on serving customers across a range of high technology industries. One of our company strengths is its people, with many colleagues having been with the company from the beginning. This provides our customers with the benefit of a wealth of experience and industry knowledge. Guohao Steel now has the whole of manufactured stainless steel products to add to its already large range of High Performance Nickel Alloys.
Guohao Steel adhere to the high standards of integrity and compliance required, including:
In order to achieve our goals, we are improving our facilities and expanding our machinery to offer broader processing capabilities. Additionally, our investment extends to the growth and development of our teams, which represent our most valuable resource. We aim for our customers to receive the best experience and trust in the expertise, knowledge, and experience of our teams. As we continue looking towards the future, we rely on our core values to guide both decisions and actions.
Guohao Steel adhere to the high standards of integrity and compliance required, including:
- Environmental standards
- Health and safety standards
- Ethical trading standards
- Export compliance requirements
In order to achieve our goals, we are improving our facilities and expanding our machinery to offer broader processing capabilities. Additionally, our investment extends to the growth and development of our teams, which represent our most valuable resource. We aim for our customers to receive the best experience and trust in the expertise, knowledge, and experience of our teams. As we continue looking towards the future, we rely on our core values to guide both decisions and actions.
Provides cost-effective products and professional services to you.
We offer an extensive range of stainless steel, super duplex steel,nickel alloy.
1.Q: Do you provide customized product services?
A: Of course, we can design and produce the products you need based on your specifications and drawings. For example: special dimensions, special controls, OEM, etc.
2.Q: Are you a manufacturer or trader?
A: We are manufacturers. We have our own factory to produce and process various kinds of stainless steel /nickel alloy pipes.
3.Q: Can we get the some samples?Is there a charge?
A: Yes, we will provide you with the samples you want. The samples are free of charge, but the customer may have to pay the freight.
4.Q: Can we visit your factory?
A: Of course, we welcome you to visit our factory on-site or visit our production line through online videos to learn more about our strength and quality. Once we have your schedule, we will arrange a professional sales team to follow up with you.
5.Q: How do you ensure the quality of the product?
A: All products must undergo three inspections throughout the entire manufacturing process, including production, cutting, and packaging. The factory inspection report is provided with the goods. If necessary, third-party inspections such as SGS can be accepted.
6.Q: What is your delivery time?
A: Different products and procurement quantities have different delivery times. The product will be delivered as soon as possible on the basis of quality assurance. Usually, if the goods are in stock, it takes 3-10 days. Alternatively, if the goods are out of stock, it will take 25 to 45 days.
7.Q: Can you arrange shipment?
A: Of course, we have freight forwarders who have been cooperating for many years. We are VIP and can provide you with the most favorable prices and professional services.
8.Q: What if I don't have import experience?
A: We have rich export experience. As long as you have an import license, please leave the rest to us! We will help you choose the most suitable transportation service to safely and accurately deliver the product to the place where it is needed.
