Audited Supplier
3000L
New
Chemical, Paper and Pulping Industry
Differential Contact
Liquid-Liquid Mass Transfer
Heat Exchanger
ASME U Stamp Industrial Distillation Reboiler
3000L
900mm
6000mm
7tons
Liquid Industry
Heat Exchanger
180 Sqm
Titanium Gr.2/SA266
Suntech
Exchanger
Titanium
1MPa
Flammable/Toxic
1MPa
Suntech
Seaworthy Packing
ASME U, PED, TEMA, API650, EN13445
Nanjing
84196019
Product Description
Item Name: ASME U Stamp Industrial Distillation Reboiler
Application: Paper and Pulping
Tube Material: Titanium Gr.7
Tubesheet Material: Titanium Gr.7/SA266
Dimension: Dia. 900* Length 6000mm*Surface 180 sqm
Weight: 7 tons
Reboilers are heat exchangers typically used to provide heat to the bottom of industrial distillation columns.
They boil the liquid from the bottom of a distillation column to generate vapors which are returned to the column to drive the distillation separation.
Proper reboiler operation is vital to effective distillation. In a typical classical distillation column, all the vapor driving the separation comes from the reboiler. The reboiler receives a liquid stream from the column bottom and may partially or completely vaporize that stream. Steam usually provides the heat required for the vaporization.
The most critical element of reboiler design is the selection of the proper type of reboiler for a specific service.
Most reboilers are of the shell and tube heat exchanger type and normally steam is used as the heat source.
In such reboilers. However, other heat transfer fluids like hot oil or Dowtherm (TM) may be used. Fuel-fired furnaces may also be used as reboilers in some cases.
Material Test (PMI)
Ultrasonic Test
Tube-to-tubesheet welding
Penetration Test
Paint thickness measurement
We provides high grade pressure vessel, reactors, heat exchangers, heaters, towers, tanks, columns, condensers, reboilers, separators, evaporators made of Nickel Alloy, Titanium Alloy, Copper-Nickel Alloy, Zirconium, Tantalum Alloy, Super Stainless Steel and clad metals, designed and fabricated according to ASME U, PED, TEMA, API650, EN13445 and other codes. These products have been widely used in such fields as petro-chemical, chemical, salt manufacturing, pharmacy, metallurgy, power, electronics, sea-engineering and environment protection, by Global Top 50 Chemicals for one decade.
Our mill is entitled with Grade A1 for design, Grade A1 for fabrication of pressure vessels and ASME U stamps authorization. It is an ISO9001 company certified by National Quality Assurance Limited and awarded with three As of Credit Rating and High- tech enterprise.
We have around 40 welders qualified for 252 types of welding, including SAW, STAW, GTAW, GMAW) and 9 persons for non-destructive inspection (including PT,UT,MT,PT), and 5 NDE persons are qualified with the requirements of ASME.
R & D Dep. is capable of designing drawings with CAD according to GB and ASME standards. It has such technique specifications and standards related to designing, including ASME, TEMA, API650 and etc.
Our manufacturing area for pressure vessel is 14000m2(1st phase) and 15000 m2(2nd phase), among which, there are more than 1000M2 isolated workshop on non-ferrous metal welding. Rolling capacity is 80mm maximum and crane capability is 100 tons maximum.
Application: Paper and Pulping
Tube Material: Titanium Gr.7
Tubesheet Material: Titanium Gr.7/SA266
Dimension: Dia. 900* Length 6000mm*Surface 180 sqm
Weight: 7 tons
Reboilers are heat exchangers typically used to provide heat to the bottom of industrial distillation columns.
They boil the liquid from the bottom of a distillation column to generate vapors which are returned to the column to drive the distillation separation.
Proper reboiler operation is vital to effective distillation. In a typical classical distillation column, all the vapor driving the separation comes from the reboiler. The reboiler receives a liquid stream from the column bottom and may partially or completely vaporize that stream. Steam usually provides the heat required for the vaporization.
The most critical element of reboiler design is the selection of the proper type of reboiler for a specific service.
Most reboilers are of the shell and tube heat exchanger type and normally steam is used as the heat source.
In such reboilers. However, other heat transfer fluids like hot oil or Dowtherm (TM) may be used. Fuel-fired furnaces may also be used as reboilers in some cases.
| Item | Item Name | Code |
| 1 | Heat Exchanger | TEMA,ASME,EN13445,PED |
| 2 | Tower | ASME,EN13445,PED |
| 3 | Vessel | ASME,EN13445,PED |
| 4 | Storage Tank | API620,650 |
| 5 | Reactor | ASME,EN13445,PED |
Ultrasonic Test
Tube-to-tubesheet welding
Penetration Test
Paint thickness measurement
We provides high grade pressure vessel, reactors, heat exchangers, heaters, towers, tanks, columns, condensers, reboilers, separators, evaporators made of Nickel Alloy, Titanium Alloy, Copper-Nickel Alloy, Zirconium, Tantalum Alloy, Super Stainless Steel and clad metals, designed and fabricated according to ASME U, PED, TEMA, API650, EN13445 and other codes. These products have been widely used in such fields as petro-chemical, chemical, salt manufacturing, pharmacy, metallurgy, power, electronics, sea-engineering and environment protection, by Global Top 50 Chemicals for one decade.
Our mill is entitled with Grade A1 for design, Grade A1 for fabrication of pressure vessels and ASME U stamps authorization. It is an ISO9001 company certified by National Quality Assurance Limited and awarded with three As of Credit Rating and High- tech enterprise.
We have around 40 welders qualified for 252 types of welding, including SAW, STAW, GTAW, GMAW) and 9 persons for non-destructive inspection (including PT,UT,MT,PT), and 5 NDE persons are qualified with the requirements of ASME.
R & D Dep. is capable of designing drawings with CAD according to GB and ASME standards. It has such technique specifications and standards related to designing, including ASME, TEMA, API650 and etc.
Our manufacturing area for pressure vessel is 14000m2(1st phase) and 15000 m2(2nd phase), among which, there are more than 1000M2 isolated workshop on non-ferrous metal welding. Rolling capacity is 80mm maximum and crane capability is 100 tons maximum.
