Audited Supplier
AV10 AV13 AV17 AV22 XPA XPB XPC
Standard
Textile Machinery, Garment Machinery, Conveyer Equipment, Electric Cars, Motorcycle, Food Machinery, Mining Equipment, Agricultural Machinery, Car
Flame-Retardant, Anti-Static, Oil-Resistant, Heat-Resistant, Wear-Resistant, High Temperature-Resistance
Strong
Rubber/Polyester, Kevlar, Rubber
V Belt
ISO1813
Polyester Cotton Canvas
Polyester Hard Cord
Cr / EPDM, Polyester, Kevlar
Skyline/Hipower
Paper Cartons/ PP Braided Bag
Black
Power Transmission
Raw Edge/Cogged/Plain
HIPOWER/SKYLINE
Plastic Bag/ Carton
AX80, XPZ1550
China
4010390000
Product Description
RAW EDGE COGGED V BELT
Feature
. Greater transmission power than classical v belt
. Large friction coefficient, small friction loss
. Absorb transmission vibration, low noise, long service
. Fatigue endurance reaches one hundred million times.
. Temperature range from -50ºC to 120ºC
. Oil, heat, Ozone, abrasive resistance, anti-statistics
Marking
.AX 1245Li 1275Ld: AX49 means type AX (toothed), its inside length is 1245mm, its pitch length is 1275mm, and its inside length is 49inches.
WEDGE RAW EDGE V BELT
Features
.. Greater transmission power than classical v belt
. Large friction coefficient, small friction loss
. Absorb transmission vibration, low noise, long service
. Fatigue endurance reaches one hundred million times.
. Temperature range from -50ºC to 120ºC
. Oil, heat, Ozone, abrasive resistance, anti-statistics
Material Option
Rubber: CR rubber, EPDM rubber
CR rubber has a good performance of oil resistance and chemical resistance, a certain of heat and cold resistance. But EPDM rubber has better
properties in heat resistance and ozone resistance, which means longer working life than CR type.
Mark
Wedge raw edge v belts fall into two categories. The metric SP series comprise of XPZ, XPA, XPB, XPC. The inch series include 3vx, 5vx, 8vx models. V belts of these types are marked according to the outer length of the factory v belt. Specific noting shall be made on the order list of the customer, if the customer has special requirement. The length conversion table is available for conversion between various models.
Example mark
XPZ 1283La 1270Ld 3vx500 means that its type is XPZ, outer length is 1283mm, pitch length is 1270mm, and it is corresponding to 3vx500.
. Material
. Production & Packing
Testing & Laboratory
More Rubber Belts available:
Wrapped V Belt, Poly V Belt, Synchronous Belt, Raw Edged V Belt, Flat Transmission Belt, Elevator Belt, Rubber Conveyor Belt
FAQ
Q1. Can I have a sample order?
Yes, any sample order is welcome to know the quality of our products.
Q2. What about the lead time of the sample or the final order?
2-5 days for normal sample.
20-30 days for a formal order.
Q3. How much is the minimum quantity for each item in one order?
One mould quantity is ok. Usually around 50pcs for small item, 10pcs for big item.
Q4. Is it possible to print our logo or brand on the belt?
Yes, we can print your logo or design on the belt after receipt of your formal authorization .letter of the logo or your brand.
Q5. Do you offer the guarantee for your product?
Yes, usually we offer one year warranty for all of our products.
Feature
. Greater transmission power than classical v belt
. Large friction coefficient, small friction loss
. Absorb transmission vibration, low noise, long service
. Fatigue endurance reaches one hundred million times.
. Temperature range from -50ºC to 120ºC
. Oil, heat, Ozone, abrasive resistance, anti-statistics
| .Type | Top width | Pitch width | Height | Angel | Length conversion | Length Range inch | Length Range mm |
| .ZX | 10 | 8.5 | 6 | 40º | Li=Ld-22 | 20"-100" | 508-2540 |
| .AX | 13 | 11 | 8 | Li=Ld-30 | 20"-200" | 508-5080 | |
| .BX | 17 | 14 | 11 | Li=Ld-40 | 20"-200" | 508-5080 | |
| .CX | 22 | 19 | 14 | Li=Ld-58 | 20"-200" | 508-5080 |
Marking
.AX 1245Li 1275Ld: AX49 means type AX (toothed), its inside length is 1245mm, its pitch length is 1275mm, and its inside length is 49inches.
WEDGE RAW EDGE V BELT
Features
.. Greater transmission power than classical v belt
. Large friction coefficient, small friction loss
. Absorb transmission vibration, low noise, long service
. Fatigue endurance reaches one hundred million times.
. Temperature range from -50ºC to 120ºC
. Oil, heat, Ozone, abrasive resistance, anti-statistics
Material Option
Rubber: CR rubber, EPDM rubber
CR rubber has a good performance of oil resistance and chemical resistance, a certain of heat and cold resistance. But EPDM rubber has better
properties in heat resistance and ozone resistance, which means longer working life than CR type.
Mark
Wedge raw edge v belts fall into two categories. The metric SP series comprise of XPZ, XPA, XPB, XPC. The inch series include 3vx, 5vx, 8vx models. V belts of these types are marked according to the outer length of the factory v belt. Specific noting shall be made on the order list of the customer, if the customer has special requirement. The length conversion table is available for conversion between various models.
Example mark
XPZ 1283La 1270Ld 3vx500 means that its type is XPZ, outer length is 1283mm, pitch length is 1270mm, and it is corresponding to 3vx500.
| Type | Top width | Pitch width | Height | Angel | Length conversion | Length Range inch | Length Range mm |
| .3VX | 9.5 | / | 8 | 40º | La=Li+50 | 20"-200" | 508-5080 |
| .5VX | 16 | / | 13.5 | La=Li+82 | 30"-200" | 762-5080 | |
| .XPZ | 10 | 8.5 | 8 | La=Li+50 | 20"-200" | 508-5080 | |
| .XPA | 13 | 11 | 10 | La=Li+63 | 20"-200" | 508-5080 | |
| .XPB | 16.3 | 14 | 14 | La=Li+82 | 30"-200" | 762-5080 | |
| .XPC | 22 | 19 | 18 | La=Li+113 | 30"-200" | 762-5080 |
. Material
. Production & Packing
Testing & Laboratory
More Rubber Belts available:
Wrapped V Belt, Poly V Belt, Synchronous Belt, Raw Edged V Belt, Flat Transmission Belt, Elevator Belt, Rubber Conveyor Belt
FAQ
Q1. Can I have a sample order?
Yes, any sample order is welcome to know the quality of our products.
Q2. What about the lead time of the sample or the final order?
2-5 days for normal sample.
20-30 days for a formal order.
Q3. How much is the minimum quantity for each item in one order?
One mould quantity is ok. Usually around 50pcs for small item, 10pcs for big item.
Q4. Is it possible to print our logo or brand on the belt?
Yes, we can print your logo or design on the belt after receipt of your formal authorization .letter of the logo or your brand.
Q5. Do you offer the guarantee for your product?
Yes, usually we offer one year warranty for all of our products.
