Audited Supplier
SM-AD-S600/601
Following Updating
Under Discussion
24 Bits
24VDC
-20~60
-40~80
200mA
20g
10%~85%, Non-Condensing
Sun-Moon
Wooden Box
110*23*116mm
China
9031809090
Product Description
Product Description:
AD-S600/601-C weighing AD control module (also called digital weight transmitter) is a weighing AD module with switching control function. Its basic function is to turn the analog signal of the load cell into a digital weight signal; then after dynamic digital filtering and static digital filtering to make the digital weight signal respond faster and more accurately, the digital weight signal can be sent out through the serial port; at the same time, through the D/A converter, the digital weight signal will be turned into an analog 4-20mA current signal or a 0-5(10)V voltage signal (only for AD-S600). -C).
The module has RS485 and RS232 dual communication interfaces, supports the standard MODBUS RTU communication protocol and continuous output mode, and is able to communicate with computers, PLCs and other host computers, as well as connecting to large screens. The module can realize both high precision weighing under static condition and high speed accurate dynamic weighing under shock and vibration condition. The module adds switching inputs and outputs to the hardware, so external switching signals can be used to realize operations such as clearing, tare, start and stop (three kinds of operations can be realized at the same time), and constant value control, upper and lower limit control, quantitative control, reduction control and sorting control of weight signals can be accomplished. It can be widely used in quantitative weighing packaging machine, batching weighing packaging machine, liquid filling weighing machine, weight sorting machine, tensile testing machine, load tester and other devices.
Product technical parameters:
The module has RS485 and RS232 dual communication interfaces, supports the standard MODBUS RTU communication protocol and continuous output mode, and is able to communicate with computers, PLCs and other host computers, as well as connecting to large screens. The module can realize both high precision weighing under static condition and high speed accurate dynamic weighing under shock and vibration condition. The module adds switching inputs and outputs to the hardware, so external switching signals can be used to realize operations such as clearing, tare, start and stop (three kinds of operations can be realized at the same time), and constant value control, upper and lower limit control, quantitative control, reduction control and sorting control of weight signals can be accomplished. It can be widely used in quantitative weighing packaging machine, batching weighing packaging machine, liquid filling weighing machine, weight sorting machine, tensile testing machine, load tester and other devices.
Product technical parameters:
| 1.A/D resolution: 24 bits; |
| 2.Static weighing accuracy:1/100000; |
| 3.A/D module weight output rate: 6.25, 12.5, 25, 50, 100, 200 times/sec optional (default 50); |
| 4.Communication port: RS-232 and RS-485 can be used at the same time, support the standard Modbus RTU communication protocol.RS-232 interface supports continuous output mode, can be used to connect the large screen; |
| 5. Baud rate: 4800, 9600, 19200, 38400, 57600, 115200 optional (default 19200, even parity); |
| 6. Analog output (16-bit D/A conversion): 4-20mA or 0-5V/10V (only AD-S600D-C has this function); |
| 7.3 switching inputs, 3 switching outputs; |
| 8.12 status indicators, 5-position dip switch to set module address (default address 01); |
| 9. Sensor excitation voltage: 5VDC, maximum current: 100mA (including the current consumed by 4 350Ω load cells); |
| 10. Module working power supply: 24VDC 200mA (excluding switching output consumption); |
| 11. With bus power supply and RS-485 communication function, multiple modules can be connected in parallel through connectors (optional); |
| 12. Standard DIN-rail mounting method; |
| 13. Shell size (with terminals): 110mm × 23mm × 116mm; |
| 14. Operating environment: temperature -20~60ºC, relative humidity 10%~85%, non-condensing; |
| 15.Storage environment: temperature -40 ~ 80 ºC, relative humidity 10% ~ 85%, non-condensing. |
