Audited Supplier
DL-FAKRAZG-RF1.13-IPEX- 120-C
RF, FPC, PCB, Audio & Video, Microwave
Fakra
Gold
ISO9001, CE, RoHS
Female
Snap-On
Through Hole
PTFE
Gold
Beryllium Copper
Fakra Connector
120mm
DeliNComm
Plastic Bags Carton
China
Product Description
FAKRA Header Characteristics
| Electrical Characteristics | The FInish | ||
| Impedance | 50Ω | Body | Nickel |
| Frequency range | 0-4GHz | Center contact | Gold |
| V.S.W.R | <=1.3 | Outer contact | Nickel |
| Insertion Loss | <=0.3dB | Ferrule | Nickel |
| Insulation resistance | >=1000MΩ | ||
| Center contact resistance | <=20mΩ | ||
| Working voltage | <=335 Voltage | ||
| Dielectric withstanding voltage | >1000 Voltage | ||
| Mechanical Characteristics | Materials | ||
| Connection insertion Force | <=25N | Plastic housing | PA66 |
| Connection extraction force | <=25N | Socket contact | Bronze |
| Locking device trength | >=80N | Pin contact | Brass |
| Center contact retention force | >=0.28N | Outer contact | Brass |
| Outer contact retention force | >=2N | Ferrule | Brass |
| Mating cycles | 25cycles Min. | Insulator | PTFE |
| Temperature range | -40/+105ºC | ||
| Solder version | to 200ºC/60s | ||
| Plastic housing fore rating | Materials | ||
| Fire UL94, V-0 rating FR70 | PA66(GF30%) | ||
RG-1.13 Line Specifications
2.1 SCOPE:The specification covers FEP insulated High-Frenquency coaxial cable for internal wiring of electronic equipment.
[UL STYLE 1354 80ºC/30V]
USE: Internal wiring of Class 2 Circuits of Electronic Equipment
2.2 Construction:
| Item | Unit | Spec. Value | |||
| Inner Conductor | Material | --- | Silver plated copper | ||
| Contruction | No./mm | 7/0.08 | |||
| Dia.(approx) | mm | 0.24 | |||
| Insulation | Material | --- | FEP | ||
| Nom. Thickness | mm | 0.22 | |||
| Dia.(approx) | mm | 0.68±0.05 | |||
| Color | --- | Natural | |||
| Outer Conductor | Type | --- | Braid | ||
| Materail | --- | Silver plated copper | |||
| Coverage | % | >93 | |||
| Dia.(approx) | mm | 0.93 | |||
| Jacket | Material | --- | FEP | ||
| Nom. Thickness | mm | 0.10 | |||
| Color | --- | Gray | |||
| Dia.(approx) | mm | 1.13+0.10/-0.06 | |||
2.3 Characteristics:
| Test Item | Unit | Specified Value | Note |
| Appearance | - | Faultless in visible | - |
| Temperature rating | ºC | 150 | - |
| Voltage Rating | V | 250 | - |
| Inner Conductor Resistance(at 20ºC) | Ω/km | Max. 597 | at 20ºC |
| Insulation Resistance 1>(at 20ºC) | MΩ-km | Min. 1500 | at 20ºC |
| Dielectirc strength | Delectirc core: No breakdown at AC 1.5KV for 0.15sec | Spark test | |
| Jacket: No breakdown at AC 1.5KV for 0.15sec | Spark test | ||
| No breakdown at AC 500V for 1min | Outer conductor to inner conductor | ||
| Capacitance | pF/m | Nom. 98 | At 1KHz |
| Characteristic impedance(at D-TDR) | Ω | 50±2 | TDR Method |
| Attenuation | dB/m | 2.0 | 1.0GHz |
| 2.9 | 2.0GHz | ||
| 3.6 | 3.0GHz | ||
| 4.2 | 4.0GHz | ||
| 4.7 | 5.0GHz | ||
| 5.2 | 6.0GHz | ||
Cross section of RF1.13 Cable | |||
IPEX Specifications
3.1 Test conditionUnless otherwise specified,all tests and measurements shall be performed under the following conditions in accordance with MIL-STD-202
Temperature: 288~308K(15~35°C)
Humidity:45~75%RH
3.2 Electrical
1) Contact Resistance
A. Testing: Solder the receptacle connector to the test board and mate the plug connector together, then measure the contact resistance as shown in Fig.1 buy the four terminal method. Apply the low level condition in accordance with MIL-STD-202, Method 307.
Open circuit voltage: 20mA MAX.
Circuit current: 10mA MAX. (DC or AC 1kHz)
Contact resistance of inner contact:<resistance of A-E>-<resistance of B-E>
Contact resistance of ground contact:<resistance of A-D>-<resistance of B-D>
B.Requirements:
Contact resistance of inner contact initial 20 milli-ohm MAX. After testing25 milli-ohm MAX.
Contact resistance of ground contact initial 10 milli-ohm MAX.
After testing 15 milli-ohm MAX.
2)Insulation resistance
A.Testing: Mate the plug and receptacle conntector together, then apply DC 100V between the inner contact and the ground contact in accordance with MIL-STD-202, Method 302.
B.Requirements: Initial 500 Mohm MIN. After testing 100Mohm MIN.
3)Dielectric with standing voltage
A.Testing: Mate the receptacle and plug conntector together, then apply AC 100V rms between the inner contact and the ground contact for a minute in accordance with MIL-STD-202, Method 301.
B.Requirements: No creeping discharge, flashover, nor insulator breakdown shall occur.
4)VSWR
A.Testing: Measure the VSWR as shown in Fig.3 by the network analyzer.
Frequency: 100M~6GHz
B.Requirements: Plug 1.3 MAX.at 0.1-3GHz 1.5 MAX. at 3-6GHz
Receptacle 1.3 MAX. at 0.1-3GHz. 1.4 MAX. at 3-6GHz
