IP Unknown

MadeInChina.com > Industrial Equipment & Components > Industrial Ceramic Products > Ceramic Substrate

Advance Electronic Dbc Dpc Metallized Alumina Ceramic Substrate

Price	$50.00 Compare
Min Order	1 Piece
Shipping From	Fujian, China
Popularity	413 people viewed
Quantity	+-

Xiamen Innovacera Advanced Materials Co., Ltd.

Audited Supplier 2 years

Profile Certified by SGS/BV

Fujian, China
Qiu Jinchang (Mr.)
General Manager

Visit Homepage Product Catalog

Product Detail

Application:

Aerospace, Electronics, Medical, Vacuum Brazing

Compressive Strength:

2300MPa

Coating Thickness:

8-30μm

Coating Layer:

Mo/Mn

Plated Layer:

Nickel/Copper/Gold

Thermal Conductivity:

25W/(M.K)

Processing Service:

Moulding

Plating Thickness:

2-9μm

Max. Use Temperature:

1600ºC

Density:

3.7g/cm3

Material Composition:

Alumina, Al2O3

Speciality:

High Insulation, High Strength

Type:

Ceramic Plates

Trademark:

INNOVACERA

Transport Package:

Standard Cartons with Foam

Origin:

Fujian, China

Product Description

DBC (Direct Bonded Copper) tenique denotes a special process in which the copper foil and the al2o3 or AlN (one or both sides) are directly bonded under appropriate high temperature. The finished super-thin DBC substrate has excellent electrical isolation,high thermal conductivity, fine solderability and high bonding strength.It may be structured just lick PCB to get etched wiring and has high curreng loading capability .Therefore DBC ceramic substrates have become the base material of tuture for both the construction and the interconnection techniques of high power semiconductor electronic circuits and also have been the basis for "chip on boaed" technology which repre-sents the packaging trend in century.

DBC Substrate Features:

1.High mechanical strength,mechanically stable shape;high strength,fine thermal conductivity,excellent electrical
isolation;good adhesion,corrosion resistant;

2.Much better thermal cycling capabilities (up to 50000 cycles),high reliability;

3.May be structured just like PCB boards or IMS substrates to get etched wiring;

4.No contamination,environmentally clean;

5.Wide application temperature:-55 ~ 850; The thermal expansion coefficient is closed to that of silicon, so production technologies of power module are greatly simplified. Specification >Metallization thickness: 25 ±10um >Nickel thickness:2~10um; >Pin full strength: 4200kgf/cm2 avg. (at Φ3.0mm pin) Characteristics: Specialized Alumina materials with high insulation resistance High-reliability ceramic tubes. Mo-Mn metallization with nickel plating allows customers to assemble hermetically sealed products. Joining types: Ceramic + Mo/Mn Metallized + plating Ni Ceramic + Mo/Mn Metallized + plating Ag Ceramic + Mo/Mn Metallized + plating Au Ceramic + printing Ag Special types are available according to customer's drawings or samples

Properties

Properties			Unit	Test Method	Material
Properties			Unit	Test Method				IN94	IN96	IN99
Mechanical	Color	-	-	White	White	Ivory
		Alumina Content	%	-	94	96	99
		Bulk Density	g/cm3	ASTM C-20-83	3.70	3.80	3.90
		Surface Roughness	Um	Profilometer	-	Max 0.6	-
		Water Absorption	%	ASTM C373-72	0.0	0.0	0.0
		Average Crystalline Size	Um	ASTM E112-88	4	3	4
		Flexural Strength (20°C)	MPa	ASTM F417-78	350	370	370
		Elastic Modulus	Gpa	ASTM C773-82	290	310	340
		Poisson's Ratio	-	ASTM C773-82	0.22	0.22	0.22
		Compressive Strength	Mpa	ASTM C773-82	2100	-	2500
		Hardness	-	Knoop 1KG	12	-	14
		Fracture Toughness	Mpa.m1/2	NOCHED BEAM	3.4	-	4.5
Thermal	Thermal Conductivity (20°C)	W/m.K	ASTM C408-82	21	24	28
		Coefficient of Thermal Expansion(20~1000°C)	×10-6/°C	ASTM C372-81	8.0	7.8	8.1
		Specific Heat	Cal/g°C	ASTM C351-82	0.2	0.2	0.2
		Thermal Shock Resistance	°C	Customer	200	200	200
		Max. Use Temperature	°C	-	1600	1600	1650
Electrical	Dielectric Strength	KV/mm	ASTM D116-76	≥12	≥15	≥17
		Dielectric Constance (1MHz.25°C)	-	ASTM D150-81	9.2	9.6	9.7
		Dielectric Loss (tan delta, 1MHz.25°C)	-	ASTM D150-81	0.0004	0.0003	0.0002
		Volume Resistivity (25°C)	Ωcm2/cm	ASTM D1829-68	≥10 14	≥10 14	≥10 14

ABOUT INNOVACERA

---

INNOVACERA is a professional high-tech enterprise, cooperate with Chinese University in advanced materials, many products are awarded as high-tech products and obtain patents.

Xiamen INNOVACERA engages in R&D, manufacturing and selling the products of advanced ceramic materials, including Alumina, Zirconia, Boron Nitride, Silicon Nitride, Machinable Glass Ceramic and other advanced materials. Through different manufacturing processes, we supply metallized ceramic components, alumina heater, ceramic pump components and other ceramic components as request.

EXHIBITION

---

>>> Our Products are Alumina Ceramic, Zirconia Ceramic, Boron Nitride Ceramic,Porous Ceramic, Silicon Nitride Ceramic, Machinable Glass Ceramic, Beryllia Ceramic, Aluminum Nitride, Metallized Ceramic Components, Alumina Ceramic Heater, Ceramic Metering Pump And so on.

>>> Our aim is to offer ideal advanced material solution for any application.
>>> We delivery the order on time, competitive price, high quality and long service to our customers.

FAQ

Q1. Do you offer samples?
A: Yes, we'll offer you samples if we have stock, but some will charge sample fee. Shipping cost will pay by customer.

Q2. What is your terms of payment?
A: T/T in advance, Western Union, Alipay, Paypal.

Q3. How about your delivery time?
A: Depends on the requirement of the producst, according to the materials, dimensions and the manufacture process.

Q4. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q5: What else products do you offer?
A: We provide the products of advanced ceramic materials, including Alumina, Zirconia, Boron Nitride, Silicon Nitride, Machinable Glass Ceramic and other advanced materials.

SEND ME

If you are interested in our products, please click here to send me an inquiry, and I will reply you within 8 hours

Message Type
* Message Content
* Name
* Phone
* Email
* CAPTCHA