Advanced Batch Warping Machine for Cotton Yarn and Fibers

Batch warping machine main parameter
Raw material: 6s-80s cotton yarn;
Working width: 1800mm
beam flange diameter 1000mm;
Warping speed: 600m/min;
Warp yarn break of braking distance: ≤ 3.5m;
The principle of yarn pressing: cantilever type pressure, pressure equalization, adjustable, no have big or small head;
Counting method: counted by warp beam and yarn guide roller;
Dental of reed: 27 teeth / pc.
Total installed power: 15KW (three-phase, 380 volts)

technical characteristics for warping machine
The whole frame structure is welded by steel plate, without shake and high stability;
The touch screen is installed on the right side of the front of the machine and is used to set process parameters and operation data, and has a fault diagnosis display;
Directly drive the warp beam with 15KW three-phase AC motor, the speed is controlled by inverter.
The logic action is controlled by PLC and has interlock protection function;
safety operation
W-type telescopic reed
Installed the blower to keep the reed clean.
PLC control,warp beam length, error <0.05%;

The creel of warping machine
Spindle distance: 270 × 270mm
No.of yarn: 720 pcs
Number of layers: 8 layers
Creel type: small V-shaped inverted outer yarn creel;
Tensioner type: two-column tensioner;
Broken yarn self-stop mode: infrared breaks and stops automatically;