Audited Supplier
FRD
1year
Lavatory Paper
Fourdrinier Wire
90-170g / M2
Automatic
CE
Customized
New
1year
5mm-3000mm
2mm-15mm
Maximum 1600mm, Minimum 800mm.
1-15 M / Min
35mm-250mm
Friends Machinery
1. Fixed All The Movable Parts with Plastic Films.
2500mm
China
8439200000
Product Description
SJG-800-IV CNC four-head spiral pipe winding machine
(1) Main technical parameters
1, coil diameter: Φ35mm-Φ250mm
2. Coil speed: 1-15 m/min.
2, coil thickness: 1mm-15mm.
3, cutting pipe length: according to user needs to set automatic cutting, cutting pipe length using numerical control, servo motor drive ball screw drive. PLC control, touch screen input. Automatic tracking cutting.
4, motor power: host 15KW
5. Cutting method; Automatic tracking cutting. Knife cut 0.75kw.
5, control mode: host frequency control, PLC multi-point synchronous control. Inverter Inwitten brand. PLC Huichuan brand, signal components brand Aotuo Nix.
6, transmission mode: spiral bevel gear drive
7. Runner size: Φ210mm
8, cutting mode: CNC automatic tracking cutting knife cutting.
9. Upper belt mode: one positive upper belt and one reverse upper belt. Ensure that the force of the coil shaft is uniform.
10, belt: canvas belt standard with two.
11, coil shaft: standard 76.2mm one.
12, sizing method: gap type gluing, pneumatic diaphragm pump automatic circulation gluing, two sides gluing, gluing groove is made of stainless steel, equipped with temperature control system. The expansion force of each paper tape is adjusted to ensure the uniform expansion force. The overall position of the rubber shelf can be moved left, right, front and back, and its Angle adjustment is operated on the control panel.
13, with automatic turn-over nozzle bracket
14, electric paper rack: the number of paper layers is 27, the maximum paper diameter is 1500mm. Welded monolithic paper holder with 90° turn. The overall position adjustment with electric loading device (electric crane) adopts electric adjustment mode, and the adjustment operation is completed on the main operating panel.
15, the main machine adopts double belt and four heads, the main motor is 15kw variable frequency motor;
16, belt head operation area with safety cover;
17, the main transmission parts bearing adopts Harbin bearing.
18, the operation table is touch screen, can control the operation in various modes, with boot reset function and tight stop switch, can set the cutting length, production quantity.
19, machine weight: about 6T
20, dimensions: host 8000x2300x2000mm
21, control system: according to the following requirements
(1) Adopt PLC control,
(2) Adopt man-machine interface control. 7 inch touch screen
(3) Cutting servo motor 1.5KW, using Huichuan brand
ZFJ-1600 Scuttling and Winding machine (high configuration)
(1) Main technical parameters
| Base paper width | maximum 1600mm, minimum 800mm |
| Clean paper width | 1600mm |
| Base paper diameter | maximum Φ1350mm |
| Winding diameter | maximum Φ1350mm |
| Base paper inner core | Φ76.2mm |
| Receiving core | Φ76.2mm |
| Paper width | 30-1600mm |
| Cutting paper weight | 100-600g /m2 |
9. Slitting tool: standard configuration 20 sets.
10. Upper blade: Φ140×Φ90×Φ1.5mm.
11. Lower round knife: Φ108×Φ80×30mm.
12. Receiving shaft: standard expansion shaft Φ76mm one.
13. Loading method: hydraulic shaftless automatic loading.
14. Brake device: multi-point pneumatic brake, brake disc Φ260mm.
15. Main motor and power: AC motor, 11kw
16. Speed regulation mode: frequency conversion speed regulation; Inverter brand; Domestic quality brand.
17. Overall size: 4500×2800×1500mm.
SQJ-3000 CNC automatic paper tube cutting machine
(1) Main technical parameters
1. Pipe length: 5mm-3000mm
2. Tube thickness: 2mm-15mm
3. Cut pipe diameter: Φ76mm-Φ152mm
4. Cutting speed: servo control, automatic cutting.
5. Cutting method: round knife cutting. Paper tube rotary knife shaft does not turn
6. Cutting method; Round cutting
7. Cutter quantity: 1 set.
8. Loading and unloading method: manual loading and unloading.
9. Cutting mode: pneumatic cutting
10. Paper tube rotation power: 1.1KW
11. Cutting servo motor: 2KW
12. Voltage: 380V three-phase four-wire
13. Control system: PLC controller, Huichuan brand
14. Touch screen: Huichuan
15. Servo motor: Inwitten
16. Pneumatic components: Bosheng brand
17. Electrical components: Chint
18. Signal element: Ottonicus
19. With cutting shaft: standard 76.2mm one.
20. Transmission parts: synchronous belt transmission, Shandong Longteng
Precision ball screw, Jinan Jinjiate
21. Total weight: about 800KG
22. Cut the shaft head and bearing.
23. Operator: 1 person
24. Overall size: 2500×800×1300mm
