Aerial Work Platform Telescopic Excavator Boom Pump Crawler Truck Crane Vehicle Forklift Hydraulic Cylinder for Steering Lifting Tilt Luffing Upper Leveling

1. Forklift Hydraulic Cylinder
 

Forklift lifting cylinder

Forklift tilt cylinder

Forklift steering cylinder

2. Hydraulic Cylinder for Aerial Work Vehicles

• Lifting cylinder for Aerial Work Vehicles
• Steering cylinder for Aerial Work Vehicles
• Main boom angle cylinder
• Upper level cylinder
• Main boom extension cylinder
• Main boom angle cylinder
• Folding boom angle cylinder

3. Environmental production hydrualic cylinder
•  Locking cylinder
•  Swing arm cylinder
•  Telescopic cylinder

4. Hydraulic Cylinder for Agricultural Machinery
• Grain tank lifting cylinder
• Towing and lifting cylinder
4. Hydraulic Cylinder for Crawler crane

•  Lifting cylinder for crawler crane
•  hydraulic cylinder for preventing rear tilt of boom
•  cylinder for frame support




Applications of hydraulic cylinder

Here are some key points about forklift side shift cylinders:

1.Function: The side shift cylinder is responsible for controlling the movement of the forklift carriage and forks horizontally along the forklift's frame. It typically consists of a hydraulic cylinder, piston, seals, and a control valve. When hydraulic pressure is applied, the cylinder extends or retracts, pushing or pulling the carriage and forks laterally.

2.Benefits: Forklifts equipped with side shift cylinders offer several advantages. They allow operators to adjust the fork position to align with pallets or loads accurately, even in confined spaces. This feature reduces the need for constant repositioning of the forklift, saving time, and increasing productivity. Side shifting also improves safety by minimizing the risk of accidental collisions with racks, walls, or other obstacles.

3.Control: The side shift cylinder is typically controlled by hydraulic controls within the operator's reach. The operator can activate the controls to move the forks left or right, adjusting the position to align with the load or desired placement location.

4.Capacity and Compatibility: When selecting a side shift cylinder, consider its load capacity to ensure it can handle the maximum weight you typically handle with your forklift. Additionally, ensure compatibility with your forklift model. Different forklift manufacturers may have specific side shift cylinder designs or mounting requirements.

5.Maintenance: Regular maintenance is crucial to ensure optimal performance and longevity of the side shift cylinder. Inspect the cylinder for any signs of leaks, damage, or wear. Check the seals, hydraulic connections, and control valves for proper functioning. Follow the manufacturer's recommendations for lubrication and servicing intervals.

6.Safety Considerations: Operators should be trained on safely and correctly using the side shift feature. They should understand the limitations of the side shift cylinder and follow recommended load capacities and operating procedures. It is essential to prioritize safety and avoid exceeding the side shift cylinder's capabilities.

7.Manufacturer Support: Consider choosing a side shift cylinder from a reputable manufacturer that offers technical support, spare parts availability, and servicing options. This ensures you have access to assistance and resources if any issues arise.

How does the Forklift Side shift cylinder work?

1. Hydraulic System: The forklift's hydraulic system powers the side shift cylinder. It consists of a hydraulic pump, control valves, hydraulic lines, and a hydraulic fluid reservoir. The hydraulic pump pressurizes the fluid, which is then directed to the side shift cylinder when the operator activates the controls.

2. Control Valve: The control valve is the component that regulates the flow of hydraulic fluid to the side shift cylinder. It is typically operated by levers or buttons within the operator's reach. When the operator activates the control, the valve opens, allowing hydraulic fluid to flow into or out of the side shift cylinder.

3. Side Shift Cylinder: The side shift cylinder is a hydraulic cylinder with a piston, piston rod, seals, and cylinder housing. It is attached to the forklift carriage and positioned parallel to the forks. The cylinder is designed to extend or retract, moving the carriage and forks laterally.

4. Extension and Retraction: When the control valve is activated to extend the side shift cylinder, hydraulic fluid is directed into the cylinder, applying pressure on the piston. The pressure causes the piston to move outward, expanding the piston rod and pushing the carriage and forks in one direction. Conversely, when the control valve is activated to retract the side shift cylinder, hydraulic fluid is directed out of the cylinder, allowing the piston to move inward, pulling the carriage and forks in the opposite direction.

5. Alignment and Positioning: The operator can precisely control the lateral movement of the forks by operating the control valve. By adjusting the flow of hydraulic fluid into or out of the side shift cylinder, the operator can align the forks with the load, position them accurately within pallets or racks, or accommodate different load sizes or configurations.

6. Safety Features: Many forklift side shift cylinders have safety features to prevent accidental movements or ensure proper alignment. These may include locking mechanisms that secure the forks in position during operation or automatic centering functions that return the knives to a central part when the control is released.

We have a first-class independent R&D platform for assembly. The forklift cylinder production workshop has four semi-automatic lifting cylinder assembly lines and one fully automatic tilting cylinder assembly line, with a designed annual production capacity of 1 million pieces; the special cylinder workshop is equipped with semi-automatic cleaning and assembly systems of various specifications, with a designed annual production capacity of 200,000 essays. It has famous CNC machining equipment, machining centers, special equipment for high-precision cylinder processing, robot welding machines, automatic cleaning machines, automatic cylinder assembly machines, and automatic paint production lines. We have more than 300 sets of critical equipment running. The optimized allocation and efficient utilization of equipment resources ensure the precision requirements of the products and meet the high standard quality requirements of the products.

Painting & coating

Painting & coating line

Fully automatic water-based

Testing

To further improve product performance, and establish the leadership position of our hydraulic cylinder in the industry, our company and zjimee jointly established a Comprehensive performance laboratory of hydraulic cylinders, hydraulic valves, and hydraulic pumps; the lab is computer-assisted testing, using electro-hydraulic control technology, the test conditions preset by computer, which improves the test accuracy and system versatility, and the experimental data.
The automatic collection is realized through the application of sensors, and the output data, such as the internal leakage and load efficiency of the cylinder or the valve, are directly processed by the computer and converted to standard units (ml/min; %). At the same time, to ensure the working safety of the hydraulic system, the state monitoring function is carried out for key performance parameters, such as "oil temperature monitoring, liquid level monitoring, filter device monitoring," etc. Among them, the hydraulic cylinder test stand can test the performance of "load efficiency" and "internal leakage" by readings. At the same time, it is equipped with a grating ruler measuring instrument, which meets the requirements of all test items of hydraulic cylinder products in the national standard.