Audited Supplier
XH-BF-14 boiler pass, Centrimaster Exhaust Fans is mainly applicable to the ventilation system for 2-670t / h steam boiler in thermal power plant. The XH-BF-14 series can also be used in mine ventilation and general ventilation without other special requirements required.
Ventilator conveyor medium is the air, the maximum temperature shall not exceed 80 ºC; induced draft fan for the media is flue gas, the maximum temperature shall not exceed
250 ºC.
Dust removal device must be installed in the front of fan to minimize the amount of dust into the fan. According to the usage of general power plants, the efficiency of equipped dust collector shall not be less than 85%.
Notes:
When you want to use this series of fans to transport the gas that is flammable, explosive, corrosive or temperature over 80 ºC, we are designed and manufactured for you before your order.
Performance Curve&Parameter
Machine NO.
Ventilator and induced draft fan are made of single inhalation, each with total 13 machine number from № 8 to 29.5.
As this series fan have many different machine No and parameters, so if the following spes can't meet your demand,please contact our sales manager to get introduction book or catalog. Thanks for your patience!
| XH-BF-14 Centrifugal Fan Performance | ||||||||
| Machine No. | Drive Mode | Speed r/min | Volume m3/h | Total PressurePa | Internal Efficiency % | Internal Power kw | Power kw | Motor |
| Power(kw) | ||||||||
| 8 | D | 1450 | 16156 | 2104 | 79.4 | 11.8 | 13.85 | 18.5 |
| 18244 | 2095 | 83.2 | 12.67 | 14.86 | ||||
| 20442 | 2072 | 85.7 | 13.63 | 15.99 | ||||
| 22530 | 2018 | 87 | 14.42 | 16.92 | ||||
| 24618 | 1924 | 86.8 | 15.06 | 17.67 | ||||
| 26706 | 1794 | 85.6 | 15.45 | 18.13 | ||||
| 28904 | 1611 | 82.8 | 15.53 | 18.22 | ||||
| 30993 | 1400 | 79.4 | 15.11 | 17.73 | ||||
| 9 | D | 1450 | 23003 | 2668 | 79.4 | 21.27 | 24.96 | 30 |
| 25976 | 2656 | 83.2 | 22.83 | 26.78 | ||||
| 29106 | 2628 | 85.7 | 24.55 | 28.81 | ||||
| 32079 | 2559 | 87 | 2598 | 30.48 | ||||
| 35052 | 2440 | 86.8 | 27.13 | 31.84 | ||||
| 38026 | 2275 | 85.6 | 27.84 | 32.67 | ||||
| 41155 | 2042 | 82.8 | 27.99 | 32.84 | ||||
| 44128 | 1775 | 79.4 | 27.23 | 31.95 | 37 | |||
| 9 | D | 960 | 15229 | 1163 | 79.4 | 6.17 | 7.24 | 11 |
| 17198 | 1158 | 83.2 | 6.62 | 7.77 | ||||
| 19270 | 1146 | 85.7 | 7.13 | 8.36 | ||||
| 21238 | 1116 | 87 | 7.54 | 8.85 | ||||
| 23207 | 1064 | 86.8 | 7.87 | 9.24 | ||||
| 25175 | 993 | 85.6 | 8.08 | 9.48 | ||||
| 27247 | 891 | 82.8 | 8.12 | 9.53 | ||||
| 29216 | 775 | 79.4 | 7.9 | 9.27 | ||||
| 10 | D | 1450 | 31554 | 3301 | 79.4 | 36.02 | 42.27 | 55 |
| 35633 | 3287 | 83.2 | 38.66 | 45.36 | ||||
| 39926 | 3251 | 85.7 | 41.58 | 48.79 | ||||
| 44004 | 3166 | 87 | 44 | 51.64 | ||||
| 48083 | 3018 | 86.8 | 45.95 | 53.92 | ||||
| 52161 | 2813 | 85.6 | 47.15 | 55.32 | ||||
| 56455 | 2525 | 82.8 | 47.39 | 55.61 | ||||
| 60533 | 2194 | 79.4 | 46.12 | 54.11 | ||||
BF-14 No 10D,11D Performance
| Machine No. | Drive Mode | Speed r/min | Volume m3/h | Total Pressure Pa | Internal Efficiency % | Internal Power kw | Required Power kw | Motor |
| Power kw | ||||||||
| 10 | D | 960 | 20891 23591 26434 29134 31834 34534 37377 40077 | 1437 1431 1416 1379 1315 1226 1101 958 | 79.4 83.2 85.7 87 86.8 85.6 82.8 79.4 | 10.45 11.22 12.07 12.76 13.34 13.68 13.75 13.38 | 12.26 13.16 14.16 14.98 15.65 16.06 16.14 15.70 | 15 |
| 18.5 | ||||||||
| 10 | D | 730 | 15886 17939 20100 22154 24207 26260 28422 30475 | 829 826 817 796 759 708 636 553 | 79.4 83.2 85.7 87 86.8 85.6 82.8 79.4 | 4.60 4.93 55.31 5.61 5.86 6.02 6.05 5.88 | 5.63 7.79 6.23 6.59 6.88 7.06 7.10 6.91 | 7.5 |
| 11 | D | 1450 | 41999 47427 53142 58570 63998 69427 75141 80570 | 4003 3986 3943 3840 3660 3411 3060 2659 | 79.4 83.2 85.7 87 86.8 85.6 82.8 79.4 | 58.01 62.26 66.87 70.88 74.00 85.93 76.33 74.27 | 68.07 73.05 78.58 83.16 86.84 89.10 89.57 87.15 | 75 |
| 90 | ||||||||
| 11 | D | 960 | 27806 31400 35183 38777 42371 45965 49748 53343 | 1741 1734 1715 1671 1593 1485 1334 1160 | 79.4 83.2 85.7 87 86.8 85.6 82.8 79.4 | 16.83 18.07 19.43 20.57 21.48 22.04 22.15 21.55 | 19.75 21.20 22.80 24.13 25.20 25.86 25.99 25.29 | 22 |
| 30 | ||||||||
Ordering instructions
When ordering, please specify the fan number, speed, air volume, wind pressure, outlet angle and direction of rotation, as well as motor model, power, speed and so on.
The most important factors are volume and pressure.
Customized
When the exiting machine number, rotation, the wind angle and transmission mode can not meet the needs of users, we can design according to the fan similar theory and the user's specific parameters requirements.
Technical Support Service
When using our products, If any problems on installation,operation,maintainance..and so on, please contact our sale manager directly or leave a message on our website, we will call you in the first time.
Detailed Performance Catalog
Contact our sales manager to get a list of available fan sizes and to view detailed performance curves for each fan KuangFeng builds.
Our company is located in Zhoucun District, Zibo City, Shandong Province. It is adjacent to Bolai Expressway in the east, Zhoucun urban area in the west, Jiqing Expressway in the north, and China National Highway 309. With convenient transportation and superior geography, our company covers an area of 10000 square meters and fixed assets of 50 million yuan.
The company was founded in 1993 and, after decades of development, has been able to produce over 200 series and over 1200 products, with an annual production capacity of 20 million. The products are widely used in industries such as boilers, workshops, mines, textiles, oil fields, chemicals, kilns, metallurgy, power plants, cement plants, alumina, electrolytic aluminum, building materials, etc. The mining fans, axial flow fans, cotton opening fans, and material conveying fans produced have been inspected by customs and commodity inspection departments and exported to Southeast Asia, Pakistan, Algeria, Kazakhstan, and other countries, deeply favored in the international market.
1. 24*7 hours online service
2.Live video for the workshop by WhatsApp wechat or youtube.
3.Production according to your drawing(2D/3D)
4.High standard quality control- Testing video/Testing report available
5.Welding / Materials testing report available
6.Surface Treatment: automatic electrostatic powder coating ( ie spray) or spray paint.
7.Corrosion protection and rust removal treatment
1.Q: What parameters need to be provided when you design the industrial centrifugal fans?
A: Air flow rate(m3/h), Total pressure(Pa) or Static pressure(Pa), Inlet temperature(°C), Voltage and frequency on the working site.
2. Q:What is your delivery time?
A:15-35workdays, depending on the model of the fan.
3.Q:Are you manufacturer or trading company?
A:We are the professional manufacturer of centrifugal fans , over 30 years production experience and sales experience.
4.Q:What's your MOQ?
A:The MOQ is 1set,but larger quantity, lower price.
5.Q: What's your warranty?
A: 12 months after arrival of the goods on site.
6.Q:How do you control the product's quality?
A:All the products have quality testing and dynamic balance before delivery.
