Audited Supplier
- High Hardness Material: combination pliers are made of aluminium bronze that are durability to withstand extended daily uses, not easy to crack.
- Smooth & Clean Surface: Our combination pliers with wire cutters on the jaws are well polished and electroplated for a clean and smooth surface, rust proof for long term use
- Non-slip Handle Comfortable Grip: The long nose pliers are covered with double-layer rubber sponge non-slip handle, which is comfortable to grip and durable for use
- Easy to Use: The Stronger spring and antiskid handle of the jewelry making pliers ensure higher working efficiency and saving more effort for you
- Great for Jewelry Making: The pliers for jewelry making are commonly used for all kinds of DIY jewelry making and repair. It is an all-in-one jewelry plier that excels at opening jump rings, wire wrapping, clamping, cutting, etc.
Non-sparking tools explosion-proof tools
| Aluminum bronze Non-sparking tools | |
| Appropriate for operation with ethylene concentration | below 7.8% |
| Surface Color | Golden |
| magnetic | Micro-magnetic |
| Hardness | 20-30 HRC |
| Tensile Strength | 782N/mm²-989N/mm² |
| Elasticity Limit | 450N/mm²-550N/mm² |
| Extensibility | δ≥5% |
| Beryllium Copper Non-sparking tools | |
| Appropriate for operation with hydrogen concentration | below 7.8% |
| Surface Color | Golden Yellow |
| Magnetic | Non-magnetic |
| Hardness | 30-40 HRC |
| Tensile Strength | 1117N/mm²-1326N/mm² |
| Elasticity Limit | 840N/mm²-880N/mm² |
| Extensibility | δ≤1.0% |
To ensure the explosion-proof performance, after the raw materials are melt with scientific ratio, QC personnel will take sample piece to do drop weight and friction test according to GB/T 10686-2013 standard. The test is conducted under the highest level ExIIC, hydrogen concentration 21%. Only if the samples are tested qualified can the next step of production be carried out.
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers.
Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with irresistible force.
We have 15 people sales team to serve our client with good quality and competitive price. 3 QC to keep our quality always same as client′s requirements.
Our mainly products are as below: 1. Non-sparking tools, brass items, copper items.
2. Insulated items, such as insulated pliers, insulated screwdriver, insulated adjustable wrench.
3. Steel hand tools, including hammers, pliers, chisels, wrench, and other tools, totally about 400 items.
4. Hardware, including all kinds of nails, hinges, floor drains, bathroom hardware, kitchen hardware.
Welcome your inquiry about any tools.
After using the tools, what should I do to care for it?
1. After use, the surface should be cleaned of dirt and accumulation, and stored in a dry and safe place.
2. Percussion tool products should not be continuously struck, and there should be appropriate intermittent for more than ten times, and at the same time, the debris adhered to the product part should be removed in time before continuing to use.
3. Wrench products should not be used with excessive force, and should not be used to lengthen the force arm with casing or binding other metal bars, and to use hammer (except for hammer wrench) to screw the knob fasteners.
4. The cutting edge tools should be placed in the sink and gently touch the grinding wheel for sharpening, and should not be too strong and contact with the grinding wheel for too long.
5. In the actual operation of smashing tools, it is necessary to remove the on-site debris and the oxide corroded by the working face to prevent the impact of a third party.
Q1: Are you Manufacturer or trading company?
A: We are Manufacturer with 18 years experience. Our main products:Non-sparking Tools/Non-magnetic Tools/ Titanium Tools/Stainless
Steel Tools/ VDE insulated tools/Jumbo CRV Tools.
Q2. Can I have a sample order?
A: Yes we offer sample, you will check quality before bulk order.We can send sample order by DHL/TNT/UPS/Fedex etc.
Q3: How long is the delivery time for bulk order?
A: It depends on the order quantity, normally the delivery time will be 15-45 working days.Pls kindly contact us before order.
Q4: OEM/ODM service available?
A: Yes,we accept OEM/ODM.
Q5: How to guarantee the Quality.
A:Yes,we have strict control of the quality from the raw material to finished products according to ISO9001 QC system.
We guarantee all products are 100% qualified and backed by lifetime warranty.
