Audited Supplier
CNC machining center for aluminum profile
4-Axis CNC Profile Machining Center
Gantry Type Aluminium 4-Axis CNC Profile Machining Center
- 4-axis profile machining center
- Designed for economical and efficient machining of aluminium and thin-walled steel profiles
- All operations, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the profile bar is stationary to protect the profile surfaces
- Machining with all tools at angles continuously adjustable from -90° to +90°
- Equipped with 8 positions umbrella tool magazine allows fast machining and short tool changing time,thus optimizing the machining cycles
- Auto clamp avoidance system improves the efficiency and safety
- Operator cam software with graphic 3D display of workpieces(optional)
- The magazine can be equipped with T slot saw blade for end milling of transom profiles.
- Angle heads are available for double and end machining (0°-90°-180°-270°) (optional)
- Creative dual industrial operation system and windows operation system
- Electronic light curtain protection for operator's safety
- Two separate working zones enable machining in shuttle operation (optional)
- 18.5" panel PC, USB ports and network connection
- Automatic Central Oil Lubrication System
- 4-axis controller
- camQuix (optional)
- Shuttle operation for working on two sides
- Angle routing head for machining from below
- T slot blade for milling profile tenon and mullion
- Automatic tool sensor and length measurement
- Auto Chips conveyor system
- Barcode scanner
- Label printer
- Tool holders
- Collet chuck
- Saw head
- Tools
| Model No. | LGS-cnc-7000 | |||
| Travel Stroke | ||||
| X-Axis | 7000mm | |||
| Y-Axis | 500mm | |||
| Z-Axis | 350mm | |||
| A-Axis | 0-180° | |||
| Spindle | ||||
| Power | 12.0KW | |||
| Max. Speed | 24000rpm | |||
| Tool Shank | HSK 63 | |||
| Tool Magazine | ||||
| Magazine Type | Umbrella | |||
| Tool Shank | HSK 63 | |||
| Capacity | 8 | |||
| Tool Chang Time | 3-5s | |||
| Worktable Avoidance | Automatic Clamp Avoidance | |||
| Power Supply | ||||
| Voltage | 415V/380V/220V As per requirements | |||
| Transformer Requirement | 25 KVA | |||
| Air Source | 0.6Mpa~0.8Mpa | |||
| Air Consumption | 120L/min | |||
| Cooling | ||||
| Processing | Mist Spray Cooling System | |||
| Spindle | Air-Cooling | |||
| Lubrication | ||||
| Ball Screw | Automatic Central Oil Lubrication System | |||
| Linear Guide | Automatic Central Oil Lubrication System | |||
| Dust Collection | ||||
| Standard | Manual Push-pull Drawer | |||
| Optional | Chip Conveyor System | |||
| Protection | ||||
| Machine Protection | Protection Doors | |||
| Electronic Light Curtain Sensor Protection | ||||
| Machine Data | ||||
| Dimension(LxWxH) | 9000x2300x2500mm mm | |||
| Weight | 6000kg | |||
| Operation Requirements | ||||
| Total Power | 19.5KW | |||
| Environment Temperature | 5~40 C. Degree | |||
| Environment Humidity | 30~70 | |||
| Vibration Intensity | <0.5G | |||
| Protect from floating dust, Corrosive Air | ||||
| Grounding Resistance | <10Ω | |||
- 5-axis profile machining center
- Designed for economical and efficient machining of aluminium and thin-walled steel profiles
- All operations, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the profile bar is stationary to protect the profile surfaces
- 6-side machining. From below with an angle head (optional)
- Equipped with 8 tools+1 big saw blade alongside umbrella tool magazine allows fast machining and short tool changing time,thus optimizing the machining cycles
- Auto clamp avoidance system improves the efficiency and safety
- Operator cam software with graphic 3D display of workpieces(optional)
- High-precision grinding stable and durable gear rack and pinion,ball screw,linear guide ensures smooth and accurate machining.
- Creative dual industrial operation system and windows operation system for convenient and more option operation
- Electronic light curtain protection for operator's safety
- Two separate working zones enable machining in shuttle operation (optional)
- 18.5" panel PC, USB ports and network connection
- Automatic Central Oil Lubrication System
- 5-axis controller
- camQuix (optional)
Options
- Shuttle operation for working on two sides
- Angle routing head for machining from below
- Automatic tool sensor and length measurement
- Auto Chips conveyor system
- Barcode scanner
- Label printer
- Tool holders
- Collet chuck
- Saw head
- Tools
| Model No. | SETH-LGS-CNC-7000 | ||||
| Travel Stroke | |||||
| X-Axis | 7000mm | ||||
| Y-Axis | 600mm | ||||
| Z-Axis | 500mm | ||||
| A-Axis | ±120° (bigger than 0-180°) | ||||
| C-Axis | ±230° (bigger than left&right 0-360°) | ||||
| Spindle | |||||
| Power | 17.0KW | ||||
| Max. Speed | 24000rpm | ||||
| 5-Axis Head | HSK F63/BT40 | ||||
| Tool Magazine | |||||
| Magazine Type | Umbrella | ||||
| Tool Shank | HSK F63/BT40 | ||||
| Capacity | 8+1 | ||||
| Tool Chang Time | 3-5s | ||||
| Fixed Blade Dia. | 400mm (500mm Optional) | ||||
| Worktable Avoidance | Automatic Clamp Avoidance | ||||
| Power Supply | |||||
| Voltage | 415V/380V/220V As per requirements | ||||
| Transformer Requirement | 25 KVA | ||||
| Air Source | 0.6Mpa~0.9Mpa 600L/min | ||||
| Cooling | |||||
| Processing | Mist Spray Cooling System | ||||
| Spindle | Oil-Cooling | ||||
| Lubrication | |||||
| Ball Screw | Automatic Central Oil Lubrication System | ||||
| Linear Guide | Automatic Central Oil Lubrication System | ||||
| Dust Collection | |||||
| Standard | Manual Push-pull Drawer | ||||
| Optional | Chip Conveyor System | ||||
| Protection | |||||
| Machine Protection | Protection Doors | ||||
| Electronic Light Curtain Sensor Protection | |||||
| Machine Data | |||||
| Dimension (LxWxH) | 10500x3600x2800mm | ||||
| Weight | 10000kg | ||||
| Operation Requirements | |||||
| Electricity | 29KW 3Phase | ||||
| Environment Temperature | 5~40 C. Degree | ||||
| Environment Humidity | 30~70 | ||||
| Vibration Intensity | <0.5G | ||||
| Protect from floating dust, Corrosive Air | |||||
| Grounding Resistance | <10Ω | ||||
1. Aluminum Facade Machining Center is advanced industrial CNC 4-axis profile machining systems.
2. Suitable for aluminum profile and other light alloys, as well as UPVC profile processing.
3. The milling head can drill within a range of 90 ° ~0 ° ~-90 ° with according tools at any position.
4. The machine completes milling, drilling, flexible tapping, grooving, steel drilling(within 3 mm) and other multi-functional precisely in one time, the profile was conveyed by the precise stationary avoid profile damage.
5. Adopts imported high precision linear guide ways, ball screws, gear racks and servo motor, ensuring smooth motion, positioning and processing in high precision.
6. High-quality imported automatic tool change based on automatic travel magazine, minimum the tool change time and rotation noise, maximum stability, precision, and cutting ability.
7. Magazine is equipped with 9 tool positions as standard, adjustable pneumatic special fixture to ensure efficient processing.
8. Double working areas for two kinds of profile loading, milling one after another, interactive feeding, non-interference.
9. Multiple safety protection structure to ensure operator safety.
10. Operation system based on the window environment. Friendly interface and remote control for quick trouble shooting.
11. Automatic clamp position function.
12. Online with ERP software, can realize scanning code and automatic processing(optional).
13. Gantry Type structure. High strength welding structure, heat aging and annealing processing,
guarantee high rigidity and high stability.
14. UPS & AC is included for protecting operation system.
Power supply:380v,50Hz
Working pressure:0.6~0.8 Mpa
Total power:16 kw
Spindle power:9kw
Spindle rotary speed:24000rpm
Spindle maximum output torque:6.4 NM
Tool magazine: 8+8
Tool shank model: ISO30
Clamps No.: 8
Processing travel:X-6000 Y-500 Z-300
Feeding speed: X50m/min Y25m/min Z10m/min
Processing size: 6000x450x300
Lubrication : automatic
Cooling :Oil mist pump
Overall dimension:9000x2230x3060mm
Weight: 5700kg
The machine has drilling, boring, milling, reaming, reaming, rigid tapping, linear interpolation, arc interpolation, helix interpolation, three coordinate linkage and other processing functions; Use international special CNC numerical control system; Suitable for all kinds of basic large parts, plate parts, plate parts, shell parts, mold and other precision parts processing; Adopt imported spindle reducer to meet the needs of high torque and high-speed processing; With high precision, high speed, high flexibility, environmental protection characteristics; Widely used in: aerospace, shipbuilding, power generation, military industry, heavy machinery, locomotives, machine tools, textile machinery, printing machinery, mold manufacturing and other industries.
Jinan SETH intelligent equipment co., ltd. specializes in the production of
aluminum,upvc window and door machine,curtain wall and hollow glass processing machine
equipment that can meet the needs of different clients, and can also be customized
according to customer requirements of different grades of products.
The company has rich experience in production and more than 10 national patents
and passed ISO9001,SGS,CE certifications, excellent product design and development engineers,
skilled production engineers, experienced production management team and after-sales service
that providing you with a strong guarantee.
The company has all kinds of equipment processing workshop, assembly workshop and quality inspection center, can independently realize the design of equipment, processing, assembly,
test one-stop flow operation, to ensure the excellent quality of equipment.
our main products including aluminum&uPVC profile machining center, saw machine ,milling machine,welding machine,corner cleaning machine.corner crimping machine,
punching&drilling machine.
Customer is the foundation, the company in line with the " quality first, customer first" principle,
Please join hands with SETH to lead intelligence.
