Anion exchange membrane from USA for Anode E-coat process AMI-7001 / MA3475 / MA-7500

Price $500.00 Compare
Min Order 1 Meter
Shipping From Beijing, China
Popularity 400 people viewed
Quantity
+-
 

RisingSun Membrane Technology (Beijing) Co., Ltd.

VIP   Audited Supplier 6 years
Profile Certified by SGS/BV
AE3
Ionite membrane
Anion Exchange Membrane
48inch
1-10
Quaternary Ammonium
Customized
Carton Box
America
39219090
Product Description
Anion exchange membrane from USA for Anode E-coat process AMI-7001 / MA3475 / MA-7500
We supply both Anion and Cation exchange membrane for electrocoat process and water treatment industries. Nowadays, anion exchange membrane is popular used for most of CED systems, which is approved by PPG, Dupont, Valspar, Kansai and many other electrocoat paint systems. Moreover, our ion exchange membranes can be used in electro deionization systems for the production of ultra-pure water. We have three types of anion exchange membrane sheet, please see below table for the detail:
 
PRODUCTS SPECIFICATION
Ion Exchange Membrane
Model
Membrane CharacterFunctional
Group
Exchange Capacity meq/gReplacement ReferenceTypical Application
BrandModel
AE1AnionQuaternary Ammonium1.0±0.1 MI AMI-7001The anode & cathode electrocoating process;
EDI, etc.
AE20.9 LANXESS SYBRONIONAC MA-3475
AE31.0 IONAC MA-7500
CE1CationSulfonic Acids1.6±0.1 MI CMI-7000
CE21.4 LANXESS SYBRONIONAC MC-3470
 
ANION EXCHANGE FLAT SHEET MEMBRANE
Model:AE3
Physical and Chemical PropertiesU.S. Units Metric Units
Functional group  quaternary amine quaternary amine
Exchange capacitymin.  meq/g1.0
Current density max.ampere/ft250ampere/m2538
Area resistanceohm/cm0.1 N NaCl300.1 N NaCl30
1.0 N NaCl101.0 N NaCl10
Permeslectivity0.5 N NaCl /1.0 N NaCl99 99
Water permeability @5 psimax.ml / hr / ft250ml / hr / m2538
Mullen burst testmin.psi150bar10.3
StabilitypH range 1-10 1-10
Stabilitymax.temp°F176 ºC80
Dimensionsmax.widthinches43meters1.09
Dimensionsmax. lengthfeet98.4meters30
Dimensionsapprox. thicknessmils20mm0.51
Ionic form as shipped  Cl- Cl-
Storabilityof productsmax.years2max.years2
Storabilitytemp range°F40-75 ºC4-24

Flat Sheet Membrane Samples for Feasibility Tests
Membrane Preparation
   This ion exchange membranes are furnished dry for ease of storage.  The membranes should remain in the shipping canister in a dry environment until ready for use.  Membranes should be prepared for service by either of the two methods listed below.
Method A -  The membranes should be completely immersed in a solution similar in composition to the liquid contacting the membrane in process.  It is preferable that the liquid temperature be no greater than 131 °F
(55 ºC).  Allow a contact time of 3 - 4 hours.

Method B -  As an alternative to equilibrating in the application liquor, the membrane can be immersed in water or brine solution under the same temperature and time conditions listed in Method A.
Safety Precautions: 
 
Strong oxidants, e.g. nitric acid, can cause violent reactions when in contact with ion exchange resins.
Storage: 
 
It is recommended to store ion exchange resins at temperatures above the freezing point of water. Ion exchange membrane should not be stored in direct sunlight.  If the resin should become frozen, the membrane should be left to thaw out at ambient temperature before handling.  No attempt should be made to accelerate the thawing process.

Applications:
Electrodeionization for ultrapure water in EDI and SWEDI systems
Electrocoating for Cathodic paint systems
Electrolysis for Biological Fuel Cells
Electrodialysis for desalination and demineralization
Electroplating for metal recovery



OUR TEAM
 
FAQ
 

1. Q: What does your company specialize in?
    A: We are a leading manufacturer of filter membrane products, based in Beijing, China, with over a decade of experience.

2. Q: What types of filter membrane products do you offer?
    A: We offer MF, UF, NF & RO membranes ; A perfect cross replacement ( Dupont, Koch, Suez, Pentair, Berghof, Rochem) in high quality but economic cost and easy cooperation; External MBR (Tubular membrane), Flat MBR, spiral MBR, DTRO, STRO devoting to landfill leachate, ZLD, high salt water etc; Tubular Anode cell & Spiral UF Membrane products for the E-coat /electrocoating/ KTL/CED/electro deposition industry.

3. Q: Can you customize membrane products?
    A: Yes, we offer OEM service.

4. Q: What is the typical lead time for order fulfillment?
   
A: Usually 2-3 weeks

5. Q: What is payment methods do you accepts?

    A: We prefer T/T.

6. Q: What kind of logistics do you have?
    A: FedEx / DHL / By air / By Sea.

7. Q: Can you supply free sample?
     A:Yes, we can supply free samples, the freight charge should be on your side.
 
8. Q: Where are your customers located?
     A: Till 2023, Our clients in 94 countries worldwide, mainly in USA, Korea, UK, France, Russia, Germany, Czech, India, Spain, Brazil etc.
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA